Case IH Magnum 235 / 260 / 290 / 315 / 340 / 370 service schedule

Case IH Magnum · Tier 4 era (check your handbook for your build dates)

Every maker's service job for the Case IH Magnum 235 / 260 / 290 / 315 / 340 / 370, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.

Track your Magnum 235 / 260 / 290 / 315 / 340 / 370 for free

Versions: CVT (continuously variable) transmission; Powershift transmission

Service intervals

JobWhen
Cab air filter changeevery 400 hours
Engine oil and filter changeevery 600 hours
Fuel filters and pre-filter changeevery 600 hours
Front PTO oil and filter changeevery 600 hours
DEF / AdBlue filtersevery 600 hours
Engine air filters changeevery 1,200 hours or every year
Differential and planetary oil changeevery 1,200 hours or every year
Transmission oil and filters changeevery 1,500 hours
Coolant, valve adjustment and checksevery 2,000 hours

Service jobs and parts

Cab air filter change

Cab · every 400 hours

The handbook lists the cab air filter at every 400 hours (1,200 hours or annually on the other manual read).

PartQtyNotesPart number
Cab air filter1Check your handbookcheck your handbook
Step-by-step
  1. Open the cover, fit new filters the right way round, refit the cover.

Tools: Screwdriver

Engine oil and filter change

Engine · every 600 hours

The handbook lists the engine oil and filter at every 600 hours. The filter is changed with the oil every time. A Case IH service manual says to cut the interval to 300 hours or less if you are not using Akcela Unitek No.1 SBL CJ-4 oil.

PartQtyNotesPart number
Engine oil110W-40 (Akcela Unitek No.1 SBL CJ-4). CJ-4 (Case IH Akcela Unitek No.1 SBL CJ-4), about 25 L. Aztec Oils match: EMPROTEC UHPD-X 10W-40check your handbook
Engine oil filter1FridayParts listing for the Magnum 235 to 380 8.7 L engines; not confirmed as a CNH number, so check your parts book. Also sold as WL1017884565867
Step-by-step
  1. Park on firm level ground, stop the engine, set the park brake and take the key out. Warm the engine first.
  2. Put the tray under the sump, remove the drain plug and drain the oil fully.
  3. Remove the old filter and clean the sealing face. Oil the seal lightly on the new one.
  4. Fit the new filter as marked on it, refit the drain plug and fill with the right oil.
  5. Run the engine for a minute, stop, wait and recheck the dipstick. Look for leaks.

Tools: Drain tray (30 L), Socket set, Filter wrench, Funnel, Shop towels, Gloves

Fuel filters and pre-filter change

Fuel · every 600 hours

The handbook lists the engine primary fuel filter, the fuel pre-filter and fuel system bleeding at every 600 hours. The pre-filter also needs checking every 50 hours.

PartQtyNotesPart number
Fuel filter1FridayParts listing for the F2C-engine Magnum 235 to 380; which of the two filters it is is not stated. Also sold as 504350911, 920394105801439820
Agriline fuel filter service kit1Agriline FFK437 holds an air filter, a fuel filter and a fuel separator for Magnum Tier 4A (no oil filter in it)FFK437
Step-by-step
  1. Stop the engine and clean round the filter heads.
  2. Remove the old filters over a tray and fit the new ones with a smear of diesel on the seals.
  3. Bleed the system as the handbook says. Start and check for leaks.

Tools: Filter wrench, Drain tray, Gloves

Front PTO oil and filter change

Transmission · every 600 hours

The handbook lists the front PTO oil and filter at every 600 hours; the level is checked every 300 hours. Applies to tractors with a front PTO.

PartQtyNotesPart number
Front PTO oil1Grade: check your handbook. 4.2 Lcheck your handbook
Front PTO filter1Check your handbookcheck your handbook
Step-by-step
  1. Drain the front PTO oil, change the filter and refill.
  2. Check the level and look for leaks.

Tools: Drain tray, Socket set, Filter wrench

DEF / AdBlue filters

Emissions · every 600 hours

The handbook lists the DEF / AdBlue in-line filter at every 600 hours and the supply module filter at every 1,800 hours.

PartQtyNotesPart number
DEF in-line filter1Check your handbookcheck your handbook
Step-by-step
  1. Change the in-line filter as the handbook shows. At 1,800 hours change the supply module filter too.
  2. Check for leaks and for any warning on the display.

Tools: Gloves, Clean cloth

Engine air filters change

Engine · every 1,200 hours or every year

The handbook lists the engine air filters at every 1,200 hours or annually, and the air pre-cleaner at the same time. Change sooner when the warning shows.

PartQtyNotesPart number
Primary air filter1FridayParts listing for the Magnum 235 to 380 (8.7 L). Not confirmed as a CNH number84191182
Step-by-step
  1. Stop the engine and open the air cleaner cover.
  2. Take out the primary element. Wipe the housing clean and clean the pre-cleaner.
  3. Fit the new element and close the cover.

Tools: Clean cloth

Differential and planetary oil change

Axles · every 1,200 hours or every year

The handbook lists differential and planetary oil at every 1,200 hours or annually, with a first change at 10 to 50 hours on a new machine. The level is checked every 300 hours.

PartQtyNotesPart number
Axle gear oil1Grade: check your handbook. Rear axle quantity: check your handbook. Front: 17.5 L differential, 4.3 or 4.5 L per planetarycheck your handbook
Step-by-step
  1. Warm the oil by driving, park level and stop.
  2. Drain the differential and each planetary, refit plugs and refill to the level.
  3. Check for leaks.

Tools: Drain trays, Socket set, Funnel, Gloves

Transmission oil and filters change

Transmission · every 1,500 hours

The handbook lists the transmission oil, the transmission oil filter, the regulated transmission filter and the engine crankcase filter at every 1,500 hours.

PartQtyNotesPart number
Transmission / hydraulic oil1Tractor hydraulic-transmission oil. Case IH Akcela Hy-Tran Ultraction for CVT (maker spec; no grade given); Powershift: check your handbook. 172 L (Powershift), 187 L or 206 L (CVT)check your handbook
Hydraulic / transmission filter1FridayParts listing for the Magnum 235 to 380; which of the transmission filters it is is not stated, so check your parts book84240234
Step-by-step
  1. Warm the oil, park level and stop.
  2. Drain the oil, change all the filters the handbook names and refill.
  3. Run the engine and hydraulics, recheck the level, look for leaks.

Tools: Large drain tray, Socket set, Filter wrench, Pump or funnel

Coolant, valve adjustment and checks

Engine · every 2,000 hours

The handbook lists the engine coolant and valve adjustment at every 2,000 hours. The coolant antifreeze protection and hoses are checked every 600 hours.

PartQtyNotesPart number
Coolant1Case IH extended-life coolant (maker spec; no grade given), 26.5 Lcheck your handbook
Step-by-step
  1. Drain and refill the cooling system with the right coolant.
  2. Have the valve clearances set as the handbook says.

Tools: Drain tray, Feeler gauges, Spanners

Oils, fluids and capacities

SystemOil or specCapacity
EngineFPT / Iveco 8.7 L Cursor 9 6-cylinder turbocharged diesel with DEF / AdBlue exhaust treatment
Engine oilCase IH Akcela Unitek No.1 SBL CJ-4 or Akcela No.1 Engine Oil (CJ-4)25 L, with or without a filter change
CoolantCooling system 26.5 L
Valve clearancesValve adjustment is a 2,000-hour job; clearances: check your handbook
Engine oilCJ-4 (Case IH Akcela Unitek No.1)25 L
Transmission and hydraulics, PowershiftCase IH Akcela (check your handbook for the name)172 L
Transmission and hydraulics, CVT standard rear axleCase IH Akcela Hy-Tran Ultraction187 L
Transmission and hydraulics, CVT heavy-duty rear axleCase IH Akcela Hy-Tran Ultraction206 L
Front axle 4.75 class: differential / each planetaryCheck your handbook17.5 L / 4.3 L
Front axle 5.0 class: differential / each planetaryCheck your handbook17.5 L / 4.5 L
Front PTOCheck your handbook4.2 L
Cooling systemCase IH extended-life coolant26.5 L
Fuel tankDiesel636 L
DEF / AdBlue tankDEF (ISO 22241)87 L

Specifications

Capacities sourceMagnum 235 to 370 service manual capacities page; the table text was scrambled, so rows were matched by their US-gallon figures. Check your handbook.

Known problems

Check which manual

Two intervals sets exist in the older Magnum range (the 225 to 335 Tier 3 tractors do the engine oil at 300 hours). This entry follows the 235 to 340 handbook with DEF.

Fault codes: Armrest (18xxx) and DCU/AdBlue (19xxx) codes

Armrest controller and SCR dosing control unit

CodeMeaningWhat to do
18001 / 18002 / 18010 / 18011Hand throttle or powershift throttle voltage too low / highCheck the plug; dealer.
18007 / 18064 / 18065Multi-function handle switch, comms or self-test errorDealer.
18014-18026Rear hitch position, draft, height, drop-rate, sensitivity or slip knob voltage low/highCheck each knob; dealer.
18024 / 18027-18048 / 18066-18071Remote (EHR) lever or flow-encoder voltage/implausibility faultRelease the lever; dealer.
18049-18060Joystick axis or rocker switch voltage low / highDealer.
18061-18063 / 18072Reference voltage shorted, memory fault, or hitch raise/work switch faultDealer.
19001 / 19002 / 19361 / 19362Battery voltage high or low at the dosing unitCheck battery and charging.
19010-19020 / 19289Catalyst temperature sensor signal fault or heat-up failedDealer.
19037-19048 / 19298 / 19307 / 19370Urea pressure sensor fault, or pressure too low/highCheck DEF level; dealer.
19055 / 19056 / 19109 / 19110 / 19316 / 19325 / 19379Urea temperature sensor fault or out of rangeDealer.
19064-19084 / 19262-19264Heater or valve supply open or shortedDealer.
19100-19102 / 19649-19651Urea tank level sensor faultCheck the real level.
19145-19148 / 19817-19822Dosing valve short, open, stuck or leakingDealer.
19154-19157Urea pump motor unplugged, blocked, overspeed or sensor faultDealer.
19163-19183 / 19343 / 19344 / 19352 / 19541Coolant control or reverting valve faultDealer.
19334-19337System frozen: line defreezing or pressure build-up failedAllow it to warm; dealer if it persists.
19415 / 19559 / 19568 / 19793Urea tank empty or lowFill with AdBlue/DEF now; power will be limited.
19532 / 19550Back-flow or pressure line cloggedDealer.
19577-19607 / 19676-19679 / 19802-19808CAN data from the engine/dosing unit missing, out of range or timed outRestart; dealer.
19721-19725 / 19730-19742Dosing unit memory or main relay faultDealer.
19748 / 19749Urea pump module overheated, or leak detected (emergency shut-off)Stop and look for a leak (urea is corrosive); dealer.
19757-19784 / 19999Group faults: urea injection, air, catalyst temperature, NOx exceeded; unknownDealer.

Repair guides

The full step-by-step guides are in Farmyard Workshop once you add your tractor.

Parts list with genuine part numbers

Case IH Magnum 235 / 260 / 290 / 315 / 340 / 370 - maker filter/service sheets and parts lists already cited on the site entry; serial splits are in the row notes

Engine service

PartPart numberQtyNotes
Engine oil filter845658671FridayParts listing for the Magnum 235 to 380 8.7 L engines; not confirmed as a CNH number, so check your parts book. Also sold as WL10178
Primary air filter841911821FridayParts listing for the Magnum 235 to 380 (8.7 L). Not confirmed as a CNH number

Fuel

PartPart numberQtyNotes
Fuel filter58014398201FridayParts listing for the F2C-engine Magnum 235 to 380; which of the two filters it is is not stated. Also sold as 504350911, 92039410
Agriline fuel filter service kitFFK4371Agriline FFK437 holds an air filter, a fuel filter and a fuel separator for Magnum Tier 4A (no oil filter in it)

Transmission and hydraulics

PartPart numberQtyNotes
Hydraulic / transmission filter842402341FridayParts listing for the Magnum 235 to 380; which of the transmission filters it is is not stated, so check your parts book

Sources

Open Farmyard Workshop

More from Case IH.