Case IH Steiger / Quadtrac 400 to 620 service schedule

Case IH Steiger · Tier 4 era (check your handbook for your build dates)

Every maker's service job for the Case IH Steiger / Quadtrac 400 to 620, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.

Track your Steiger / Quadtrac 400 to 620 for free

Versions: PowerDrive (Powershift) transmission; CVXDrive transmission

Service intervals

Job	When
Grease hinges, cylinders, hitch and driveshaft	every 50 hours
Engine oil and filter change	every 600 hours
Fuel filter and pre-filter change	every 600 hours
Cab air filters	every 600 hours
Radiator and coolers clean and belts	every 600 hours
Transmission oil and filter change	every 1,200 hours
Engine breather and air filters	every 1,200 hours
Hydraulic oil and filters change	every 1,800 hours
Coolant flush and track wheel oil	every 2,400 hours
Engine valve adjustment	every 3,000 hours

Service jobs and parts

Grease hinges, cylinders, hitch and driveshaft

Chassis · every 50 hours

The handbook lists the articulation hinges, oscillation hinge, articulation cylinders, hitch cylinder pins, rockshaft, lift links and driveshaft carrier bearing at every 50 hours, with the fuel tank and fuel filter drain.

Part	Qty	Notes	Part number
Grease	1	Grade: check your handbook	check your handbook

Step-by-step

Wipe each nipple clean, then grease each point the handbook shows until fresh grease shows.
Drain any water from the fuel tank and fuel filter.

Tools: Grease gun, Rag

Engine oil and filter change

Engine · every 600 hours

The handbook lists engine oil and filter at every 600 hours. The filter is changed with the oil. The engine drain plug torque is 30 N·m (22 lb ft) for the 9 L and 13 L engines, and the plug washer is part 98474302.

Part	Qty	Notes	Part number
Engine oil	1	10W-40 (Akcela Unitek No.1 SBL CJ-4). CJ-4 (Case IH Akcela Unitek No.1 SBL CJ-4). Quantity: check your handbook. Aztec Oils match: EMPROTEC UHPD-X 10W-40	check your handbook
Engine oil filter	1	FridayParts listing for the FPT 9 L engines in the Steiger 350 to 500; not confirmed as a CNH number and may not suit the 13 L engines. Check your parts book. Also sold as 5801592262	2996416
Drain plug washer	1	Case IH service manual	98474302

Step-by-step

Park on firm level ground, stop the engine, set the park brake and take the key out. Warm the engine first.
Drain the oil, change the filter and fit the plug with a new washer to 30 N·m.
Fill to the dipstick high mark and run the engine for a minute.
Stop, wait and recheck the level. Look for leaks.

Tools: Large drain tray, Socket set, Torque wrench, Filter wrench, Funnel, Gloves

Fuel filter and pre-filter change

Fuel · every 600 hours

The handbook lists the engine fuel filter and fuel pre-filter at every 600 hours.

Part	Qty	Notes	Part number
Fuel filter	1	FridayParts listing for Quadtrac 470 to 620 and Steiger 370 to 620; not confirmed as a CNH number	84572242
Fuel filter (other listing)	1	FridayParts listing for Steiger and Quadtrac 420 to 540	84423586

Step-by-step

Stop the engine and clean round the filter heads.
Remove the old filters over a tray and fit new ones with a smear of diesel on the seals.
Prime the system as the handbook says. Start and check for leaks.

Tools: Filter wrench, Drain tray, Gloves

Cab air filters

Cab · every 600 hours

The handbook lists the outside cab air filter and the cab recirculation filter at every 600 hours.

Part	Qty	Notes	Part number
Cab air filters	1	Check your handbook	check your handbook

Step-by-step

Take out both cab filters and clean or replace them as the handbook says. Refit them the right way round.

Tools: Screwdriver, Clean cloth

Radiator and coolers clean and belts

Engine · every 600 hours

The handbook lists radiator and coolers, engine air tubing, the alternator and water-pump belt and the saddle tanks at every 600 hours.

Step-by-step

With the engine off, clean dust and chaff from the radiator and coolers.
Check the air tubing for cracks and loose clamps and the belt for wear and tension.
Check the saddle tanks as the handbook says.

Tools: Soft brush or low-pressure air, Torch

Transmission oil and filter change

Transmission · every 1,200 hours

The handbook lists the PowerDrive oil and filter (and breather) and the CVXDrive oil and filters at every 1,200 hours. New tractors need the filters changed after the first 100 hours.

Part	Qty	Notes	Part number
Transmission oil	1	Grade: check your handbook. Quantity: check your handbook	check your handbook
Transmission filter	1	FridayParts listing for Quadtrac and Steiger 420 to 620; check your parts book	48059347

Step-by-step

Warm the oil, park level and stop the engine.
Drain the oil, change the filters and refill as the handbook says.
Run the engine and check the level and for leaks.

Tools: Large drain tray, Socket set, Filter wrench, Pump or funnel

Engine breather and air filters

Engine · every 1,200 hours

The handbook lists the crankcase breather filter at every 1,200 hours. The engine air filters appear just after in the contents list, so check your handbook for their exact interval.

Part	Qty	Notes	Part number
Air filter kit	1	FridayParts listing for Steiger 420, 470 and Quadtrac 420, 470, 500: 47429531 and 47429528	47429531
Breather filter	1	Check your handbook	check your handbook

Step-by-step

Change the crankcase breather filter as shown in the handbook.
Change the engine air filters when the warning shows or at the interval in your handbook.

Tools: Clean cloth

Hydraulic oil and filters change

Hydraulics · every 1,800 hours

The handbook lists hydraulic oil and filters at every 1,800 hours, with the reservoir breather. New tractors need the filters changed after the first 100 hours.

Part	Qty	Notes	Part number
Hydraulic oil	1	Grade: check your handbook. Quantity: check your handbook	check your handbook
Hydraulic filter	1	FridayParts listing for Quadtrac and Steiger 370 to 620. Also sold as 47833556	84255607

Step-by-step

Warm the oil, park level and stop the engine.
Drain the oil, change the filters and the reservoir breather, then refill.
Run the hydraulics and recheck the level.

Tools: Large drain tray, Filter wrench, Pump or funnel

Coolant flush and track wheel oil

Engine · every 2,400 hours

The handbook lists the engine coolant drain and flush and the idler and roller wheel oil (Quadtrac) at every 2,400 hours.

Part	Qty	Notes	Part number
Coolant	1	Grade: check your handbook. Quantity: check your handbook	check your handbook
Idler and roller wheel oil	1	Grade: check your handbook	check your handbook

Step-by-step

Drain and flush the cooling system and refill with the right coolant.
Change the idler and roller wheel oil as the handbook shows.

Tools: Drain tray, Socket set

Engine valve adjustment

Engine · every 3,000 hours

The handbook lists engine valve adjustment at every 3,000 hours.

Step-by-step

Have the valve clearances checked and set as the handbook says.

Tools: Feeler gauges, Spanners

Oils, fluids and capacities

System	Oil or spec	Capacity
Engine	FPT / Iveco 9 L or 13 L 6-cylinder turbocharged diesel with DEF / AdBlue exhaust treatment
Engine oil	Case IH Akcela Unitek No.1 SBL CJ-4. The service manual says to cut the interval to 300 hours or less if you use a different oil.	Check your handbook (a Case IH service manual says the total depends on how fully the crankcase drains, so fill to the dipstick high mark)
Coolant	Check your handbook
Valve clearances	Valve adjustment is a 3,000-hour job; clearances: check your handbook
Engine oil	Case IH Akcela Unitek No.1 SBL CJ-4	Check your handbook
PowerDrive / CVXDrive transmission	Check your handbook	Check your handbook
Hydraulic system	Check your handbook	Check your handbook
Idler and roller wheel oil (Quadtrac)	Check your handbook	Check your handbook

Specifications


Sizes	Fuel and DEF tank size, transmission and hydraulic capacities differ by model; check your handbook

Known problems

Capacities not found

No capacity table for oil, transmission or hydraulics could be read, so those say 'check your handbook'.

Check the interval list

Two handbooks were read (Steiger 400 to 600 and Quadtrac 470). Both list the engine oil and filter at 600 hours.

Fault codes: Armrest (18xxx) and DCU/AdBlue (19xxx) codes

Armrest controller and SCR dosing control unit

Code	Meaning	What to do
18001 / 18002 / 18010 / 18011	Hand throttle or powershift throttle voltage too low / high	Check the plug; dealer.
18007 / 18064 / 18065	Multi-function handle switch, comms or self-test error	Dealer.
18014-18026	Rear hitch position, draft, height, drop-rate, sensitivity or slip knob voltage low/high	Check each knob; dealer.
18024 / 18027-18048 / 18066-18071	Remote (EHR) lever or flow-encoder voltage/implausibility fault	Release the lever; dealer.
18049-18060	Joystick axis or rocker switch voltage low / high	Dealer.
18061-18063 / 18072	Reference voltage shorted, memory fault, or hitch raise/work switch fault	Dealer.
19001 / 19002 / 19361 / 19362	Battery voltage high or low at the dosing unit	Check battery and charging.
19010-19020 / 19289	Catalyst temperature sensor signal fault or heat-up failed	Dealer.
19037-19048 / 19298 / 19307 / 19370	Urea pressure sensor fault, or pressure too low/high	Check DEF level; dealer.
19055 / 19056 / 19109 / 19110 / 19316 / 19325 / 19379	Urea temperature sensor fault or out of range	Dealer.
19064-19084 / 19262-19264	Heater or valve supply open or shorted	Dealer.
19100-19102 / 19649-19651	Urea tank level sensor fault	Check the real level.
19145-19148 / 19817-19822	Dosing valve short, open, stuck or leaking	Dealer.
19154-19157	Urea pump motor unplugged, blocked, overspeed or sensor fault	Dealer.
19163-19183 / 19343 / 19344 / 19352 / 19541	Coolant control or reverting valve fault	Dealer.
19334-19337	System frozen: line defreezing or pressure build-up failed	Allow it to warm; dealer if it persists.
19415 / 19559 / 19568 / 19793	Urea tank empty or low	Fill with AdBlue/DEF now; power will be limited.
19532 / 19550	Back-flow or pressure line clogged	Dealer.
19577-19607 / 19676-19679 / 19802-19808	CAN data from the engine/dosing unit missing, out of range or timed out	Restart; dealer.
19721-19725 / 19730-19742	Dosing unit memory or main relay fault	Dealer.
19748 / 19749	Urea pump module overheated, or leak detected (emergency shut-off)	Stop and look for a leak (urea is corrosive); dealer.
19757-19784 / 19999	Group faults: urea injection, air, catalyst temperature, NOx exceeded; unknown	Dealer.

Repair guides

Hard starting or loss of power: fuel filters and priming (Magnum, Steiger and Quadtrac) (Moderate, 1 hour): Engine cranks but will not start after fuel work, loses power, or fuel warning.
Weak lift or slow remotes: transmission and hydraulic filters (Magnum, Steiger and Quadtrac) (Moderate, 1–2 hours): Slow or weak hydraulics, transmission or hydraulic filter warning.
Loss of power, black smoke or DEF warning: air filter and DEF checks (Magnum, Steiger and Quadtrac) (Easy, 45 minutes): Black smoke, lack of power, restriction warning or DEF warning.

The full step-by-step guides are in Farmyard Workshop once you add your tractor.

Parts list with genuine part numbers

Case IH Steiger / Quadtrac 400 to 620 - maker filter/service sheets and parts lists already cited on the site entry; serial splits are in the row notes

Engine service

Part	Part number	Qty	Notes
Engine oil filter	2996416	1	FridayParts listing for the FPT 9 L engines in the Steiger 350 to 500; not confirmed as a CNH number and may not suit the 13 L engines. Check your parts book. Also sold as 5801592262
Air filter kit	47429531	1	FridayParts listing for Steiger 420, 470 and Quadtrac 420, 470, 500: 47429531 and 47429528

Fuel

Part	Part number	Qty	Notes
Fuel filter	84572242	1	FridayParts listing for Quadtrac 470 to 620 and Steiger 370 to 620; not confirmed as a CNH number
Fuel filter (other listing)	84423586	1	FridayParts listing for Steiger and Quadtrac 420 to 540

Other service parts

Part	Part number	Qty	Notes
Drain plug washer	98474302	1	Case IH service manual

Transmission and hydraulics

Part	Part number	Qty	Notes
Transmission filter	48059347	1	FridayParts listing for Quadtrac and Steiger 420 to 620; check your parts book
Hydraulic filter	84255607	1	FridayParts listing for Quadtrac and Steiger 370 to 620. Also sold as 47833556

Sources

Open Farmyard Workshop