Deutz-Fahr Agrolux 57, 67, F57, F67 service schedule
Deutz-Fahr Agrolux · Handbook edition 03/2005 (code 307.7229.2.6); the handbook gives no model dates
Covers the Deutz-Fahr Agrolux 57, 67, F57, F67 (SAME 1000.3 three-cylinder).
Every maker's service job for the Deutz-Fahr Agrolux 57, 67, F57, F67, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.
Track your Agrolux 57, 67, F57, F67 for freeVersions: Agrolux 57 / F57 (1000.3-W, normally aspirated, 52 hp ECE R24); Agrolux 67 / F67 (1000.3-WT, turbo, 67 hp ECE R24)
Service intervals
| Job | When |
|---|---|
| Grease points (50-hour list) | every 50 hours |
| 50-hour level and torque checks | every 50 hours |
| Engine oil and filter change | every 300 hours or every year |
| Fuel filter change and water drain | every 300 hours |
| Valve clearance and injector check | every 600 hours |
| Gearbox, rear axle and hydraulic oil change with filters | every 1,200 hours or every year |
| 4WD front axle differential and side reducer oil change | every 1,200 hours or every year |
| Coolant change | every 1,200 hours |
| Air filter cartridge and safety cartridge | every year |
Service jobs and parts
Grease points (50-hour list)
Chassis · every 50 hours
The chart greases every point every 50 hours: the steering cylinder (2 x 2), the lift rods (2), the stabiliser rods (2), the rear half-shaft bearings (2), and on 4WD the steering knuckle bearings (2 x 2) and the front and rear pivot of the front axle; on 2WD the front axle oscillation bushes and steering pins.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Grease | 1 | NLGI 2 lithium grease (Akros Grease T2, SDFG GR-1202 L). Aztec Oils match: VOLCATEC LITHIUM EP 2 | check your handbook |
Step-by-step
- Grease the steering cylinder, the two lift rods, the two stabiliser rods and the rear half-shaft bearings.
- 4WD: grease the steering knuckle bearings and the front and rear front-axle bearings. 2WD: grease the front axle oscillation bushes and the steering pins.
- Wipe off surplus grease.
Tools: Grease gun, Rag
50-hour level and torque checks
Chassis · every 50 hours
The chart checks the gearbox oil level, 4WD differential and hub oil levels, brake and clutch reservoirs, brake action and pedal play, wheel nut torque and belt tension every 50 hours.
Step-by-step
- Check the oil in the gearbox, and in the 4WD differential and hubs up to the level holes.
- Check the brake and clutch reservoirs, the brakes, the pedal play and the parking brake lever.
- Check the wheel nuts and the tension of the belt, and look over the hydrostatic steering pipes for leaks.
Tools: Torque wrench, Rag
Engine oil and filter change
Engine · every 300 hours or every year
The chart changes the engine oil and filter at the first 50 hours, then at 300, 600, 900 and 1,200 hours, and at least once a year. If the diesel has more than 0.5 % sulphur, halve the interval. 6.7 L plus 1 L with the filter.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Engine oil | 1 | 15W-40 (Akros Turbo), ACEA E3-96, API CF; 6.7 L plus 1 L with the filter. Aztec Oils match: EMPROTEC EHPD 15W-40 | check your handbook |
| Engine oil filter | 1 | check your handbook | check your handbook |
Step-by-step
- Warm the engine, stop it and put a tray under the sump.
- Drain the oil, refit the plug and replace the oil filter cartridge, oiling the seal first.
- Fill to the dipstick mark, run the engine briefly, check for leaks and recheck the level.
Tools: Drain tray (10 L), Filter wrench, Funnel
Fuel filter change and water drain
Fuel · every 300 hours
The chart replaces the fuel filter every 300 hours and drains the water from it every 50 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Fuel filter | 1 | check your handbook | check your handbook |
Step-by-step
- Every 50 hours open the drain on the fuel filter and let the water out until clean fuel shows.
- Every 300 hours replace the cartridge, wetting the seal with diesel, and bleed the system.
Tools: Container, Rag
Valve clearance and injector check
Engine · every 600 hours
The chart checks the valve clearance at delivery, 600 and 1,200 hours, and the injectors at 600 and 1,200 hours. Pump and starter checks are 1,200 hours. These are workshop jobs.
Step-by-step
- Book the tractor with a Deutz-Fahr workshop at 600 hours for the valve clearance and the injector check.
- At 1,200 hours also have the injection pump and starter checked.
Tools: Deutz-Fahr workshop
Gearbox, rear axle and hydraulic oil change with filters
Transmission · every 1,200 hours or every year
The chart renews the oil at least once a year and the filters of the gearbox, lift and auxiliary distributors after the first 150 hours, then when the filter warning lamp comes on and in any case at the oil change (1,200 hours).
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Gearbox and hydraulic oil | 1 | 10W-30 or 20W-30 UTTO, API GL-4 (Akros Multi, SDFG OT-1891); 41 L. Aztec Oils match: AGRITEC UTTO | check your handbook |
| Gearbox and hydraulic oil filters | 1 | check your handbook | check your handbook |
Step-by-step
- Warm the oil, then drain it from the gearbox and rear axle.
- Replace the gearbox, lift and auxiliary valve filters, then refill with 41 L of UTTO and check the level.
Tools: Drain tray (50 L), Spanners
4WD front axle differential and side reducer oil change
Front axle · every 1,200 hours or every year
The chart renews the oil in the front differential box and the planetary side gears, and in the side hubs, at least once a year. 6 L in the centre box and 1.5 L in each side reducer.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Front axle oil | 1 | 10W-30 UTTO, API GL-4 (Akros Multi FTC, SDFG OT-1891-A); 6 L centre, 1.5 L each side reducer. Aztec Oils match: AGRITEC UTTO | check your handbook |
Step-by-step
- Drain the centre differential box and each side reducer, refit the plugs and fill to the level.
- Check the levels again after a short run.
Tools: Drain tray, Spanners
Coolant change
Cooling · every 1,200 hours
The chart replaces the coolant at 1,200 hours. 11 L of Akros Freeze (SDFG EC-1548 A).
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Coolant | 1 | Akros Freeze antifreeze (SDFG EC-1548 A), mixed with clean water; 11 L | check your handbook |
Step-by-step
- Drain the cooling system with the engine cold, then refill with the correct mix.
- Run the engine and top up after it has cooled.
Tools: Drain tray (15 L), Funnel
Air filter cartridge and safety cartridge
Engine · every year
The chart replaces the air filter cartridge when the warning lamp comes on, at least once a year or after 6 cleanings. The inner safety cartridge is replaced after 3 cleanings of the main cartridge.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Air filter main cartridge | 1 | check your handbook | check your handbook |
| Air filter safety cartridge | 1 | check your handbook | check your handbook |
Step-by-step
- When the lamp shows, take out the main cartridge, blow it clean from the inside with dry air and check for damage.
- Fit a new cartridge at least once a year or after 6 cleanings, and a new inner safety cartridge after 3 cleanings.
Tools: Compressed air, Clean cloth
Oils, fluids and capacities
| System | Oil or spec | Capacity |
|---|---|---|
| Engine | SAME 1000.3 3-cylinder water-cooled diesel, 3,000 cc (1000.3-W on the 57, 1000.3-WT turbo on the 67), Euro II. 52 hp / 38.5 kW (57) and 67 hp / 49.5 kW (67) at 2,200 rpm | |
| Engine oil | 15W-40 (Akros Turbo), ACEA E3-96, API CF, SDFG OM-1991, MIL-L-2104 E level, MB 228.3 level | 6.7 L (the handbook adds 1 L with a filter change) |
| Coolant | 11 L Akros Freeze (SDFG EC-1548 A). Change every 1,200 hours | |
| Valve clearances | Check your handbook: the chart has a valve clearance check at delivery, 600 and 1,200 hours but the figure was not read | |
| Gearbox, rear axle, hydraulic lift, auxiliaries and hydrostatic steering (shared) | 10W-30 or 20W-30 UTTO tractor oil, API GL-4 (Akros Multi, SDFG OT-1891) | 41 L |
| Front axle centre differential (4WD) | 10W-30 UTTO, API GL-4 (Akros Multi FTC, SDFG OT-1891-A) | 6 L |
| Front axle side reduction gears (4WD), each | 10W-30 UTTO, API GL-4 (as the centre differential) | 1.5 L each |
| Brake and clutch reservoirs | ATF Dexron II D (Akros Matic, SAE 10W, SDFG OF-1691) | Up to MAX |
| Grease points | NLGI 2 lithium grease (Akros Grease T2, SDFG GR-1202 L) | — |
| Fuel tank | Diesel. If sulphur is above 0.5 %, halve the service intervals | 53 L |
Specifications
| Engine | SAME 1000.3-W (57) or 1000.3-WT (67), 3 cylinders, 3,000 cc, Euro II |
| Maximum torque | 205 N·m (57) and 260 N·m (67) |
| Rated speed | 2,200 rpm |
| Air filter | Dry, with safety cartridge |
| Fuel tank | 53 L |
Known problems
Which handbook
A French operator's manual (Utilisation et entretien, 03/2005) for the Agrolux 57, 67, F57 and F67 only. The Agrolux 60, 70, F60, F70 and F80 are in deutz-agrolux-60-70-f60-f70-f80, and the 77, 87, 97 in deutz-agrolux-77-87-97.
Engine oil
The oil table gives 6.7 L and footnotes it as 'with filter + 1 l', so about 7.7 L with a filter change. Fill to the dipstick.
Chart dots
The maintenance chart is a grid of dots with no text columns, so the intervals were read from the page image.
Sources
More from Deutz-Fahr.