Deutz-Fahr Agrolux F50, F60, F70, F80 service schedule
Deutz-Fahr Agrolux · Euro II handbook; no dates given. The earlier F3L913/F4L913 Agrolux 60, 70, F60, F70, F80 are in deutz-agrolux-60-70-f60-f70-f80
Covers the Deutz-Fahr Agrolux F50, F60, F70, F80 (air-cooled F3L914 / F4L914, Euro II).
Every maker's service job for the Deutz-Fahr Agrolux F50, F60, F70, F80, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.
Track your Agrolux F50, F60, F70, F80 for freeVersions: F50 (F3L914, 51 hp); F60 (F3L914, 56 hp); F70 (F4L914, 71 hp); F80 (F4L914, 77 hp)
Service intervals
| Job | When |
|---|---|
| Grease points (50-hour list) | every 50 hours |
| 50-hour level and tightness checks | every 50 hours |
| Hydrostatic steering and hydraulic control filter change | every 300 hours |
| Engine oil and filter change | every 500 hours or every year |
| Fuel filter change | every 500 hours |
| Rocker lubrication and valve check | every 500 hours |
| Air filter cartridge and safety cartridge | every 1,000 hours or every 2 years |
| Gearbox, rear axle and hydraulic oil change with filters | every 1,200 hours or every year |
| 4WD front axle centre differential and side reducer oil change | every 1,200 hours or every year |
Service jobs and parts
Grease points (50-hour list)
Chassis · every 50 hours
The chart greases these every 50 hours: the steering cylinder (2 x 2), the lift rods (2), the side stabiliser rods (2), the steering ball joints (2 x 2), the front axle front and rear bearings (1 each) and the rear half-shaft bearings (2).
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Grease | 1 | EP2 grease. NLGI 2 lithium grease (Akros Grease T2, SDFG GR-1202 L). Aztec Oils match: VOLCATEC LITHIUM EP 2 | check your handbook |
Step-by-step
- Grease the steering cylinder, lift rods and side stabiliser rods.
- Grease the steering ball joints, the front and rear front-axle bearings and the rear half-shaft bearings.
- Wipe off surplus grease.
Tools: Grease gun, Rag
50-hour level and tightness checks
Chassis · every 50 hours
The chart checks these at delivery and at each 300-hour service (the gearbox oil level also at 50 hours). Also check the oil cooler is clean from time to time, and the belt tension at every 250 hours.
Step-by-step
- Check the gearbox oil level and, on 4WD, the front differential and reducer levels.
- Check the brake and clutch fluid reservoirs, brake action and pedal and handbrake play.
- Check the belt tension, the electrics and battery, and the wheel nut torque.
Tools: Torque wrench, Rag
Hydrostatic steering and hydraulic control filter change
Hydraulics · every 300 hours
The chart replaces the filters of the hydrostatic steering and the electro-hydraulic controls after 50 and 150 hours, then every 300 hours and when their lamp lights.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Steering oil filter | 1 | check your handbook | check your handbook |
Step-by-step
- Clean round the filter on the right of the gearbox and put a container under it.
- Unscrew the cartridge and fit a new one with a lightly oiled seal.
- Start the engine, check for leaks and check the gearbox oil level. The filter lamp may stay on briefly when the oil is cold.
Tools: Filter wrench, Container, Rag
Engine oil and filter change
Engine · every 500 hours or every year
The handbook changes the engine oil and filter at the first 50 hours, then every 500 hours and at least once a year. If the diesel has more than 0.5 % sulphur, halve the interval. The handbook (both table and chart) gives 500 hours or once a year, with the first change at 50 hours. F50 and F60 take 9.5 L, F70 and F80 take 11 L, plus 1 L with the filter.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Engine oil | 1 | 15W-40. Akros Turbo, ACEA E3-96, API CF, SDFG OM-1991, MIL-L-2104 E, MB 228.3; F50, F60: 9.5 L; F70, F80: 11 L; +1 L with the filter. Aztec Oils match: EMPROTEC EHPD 15W-40 | check your handbook |
| Engine oil filter | 1 | check your handbook (no genuine number found) | check your handbook |
Step-by-step
- Warm the engine, stop it and put the tray under the sump. Take out the dipstick and remove the drain plug.
- Let the oil drain fully, then refit the plug (new washer if worn).
- Unscrew the old filter, wipe the sealing face, oil the new seal and screw the filter on by hand.
- Fill to the top mark on the dipstick, run the engine for a few minutes, stop it and check for leaks, then recheck the level.
Tools: Drain tray (15 L), Filter wrench, Funnel
Fuel filter change
Fuel · every 500 hours
The chart replaces the fuel filter at 500 and 1,000 hours. Drain water from it only when necessary.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Fuel filter | 1 | check your handbook (no genuine number found) | check your handbook |
Step-by-step
- Clean round the filter, unscrew the old cartridge and wet the seal of the new one with diesel.
- Fit it, bleed air from the system and check for leaks.
Tools: Container, Rag
Rocker lubrication and valve check
Engine · every 500 hours
The chart checks the valve clearance at delivery only. A line (in Italian in the French handbook) checks the rocker arm lubrication screw setting at delivery, 500 and 1,000 hours. Both are workshop jobs.
Step-by-step
- Have the workshop check the valve clearance and the rocker lubrication setting at 500 hours.
Tools: Deutz-Fahr workshop
Air filter cartridge and safety cartridge
Engine · every 1,000 hours or every 2 years
The chart replaces the main air cartridge at 1,000 hours or after 6 cleanings, and the inner safety cartridge after 3 cleanings of the main one or 2 years. Clean the gauze strainer of the fuel pump at 1,000 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Air filter main cartridge | 1 | check your handbook | check your handbook |
| Air filter safety cartridge | 1 | check your handbook | check your handbook |
Step-by-step
- Clean the main cartridge when the lamp comes on, blowing from the inside out.
- Replace the main cartridge at 1,000 hours or after 6 cleanings, and the safety cartridge after 3 cleanings or 2 years.
- Also clean the gauze strainer of the fuel feed pump at 1,000 hours.
Tools: Compressed air (dry), Clean cloth
Gearbox, rear axle and hydraulic oil change with filters
Transmission · every 1,200 hours or every year
The handbook renews the gearbox oil at least once a year (table: 1,200 hours). The gearbox, lift and auxiliary valve filters are replaced after 150 hours, then when the lamp lights and at the oil change (1,200 hours). 41 L.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Gearbox and hydraulic oil | 1 | 10W-30 or 20W-30 UTTO tractor transmission oil. API GL-4, Akros Multi (SDFG OT-1891); 41 L. Aztec Oils match: AGRITEC UTTO | check your handbook |
| Gearbox, lift and auxiliary valve filters | 1 | check your handbook | check your handbook |
Step-by-step
- Warm the oil, drain the gearbox, lift housing and steering circuit, and replace the filters.
- Refill to the sight glass or dipstick mark and check with the engine idling.
Tools: Drain tray (50 L), Spanners
4WD front axle centre differential and side reducer oil change
Front axle · every 1,200 hours or every year
The handbook renews the centre differential, planetary reducers and wheel hubs oil at least once a year (table: 1,200 hours). 6 L in the centre box and 1.5 L in each reducer.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Front axle oil | 1 | 10W-30 UTTO tractor transmission oil. API GL-4, Akros Multi FCT (SDFG OT-1891-A); 6 L centre, 1.5 L per reducer. Aztec Oils match: AGRITEC UTTO | check your handbook |
Step-by-step
- Drain the centre differential and each side reducer with the plugs at the bottom, and refit the plugs.
- Fill the centre box and the reducers to the level holes. Turn each wheel until the filler marks are in position, as the handbook shows.
- Check the levels again after a short run.
Tools: Drain tray, Spanners
Oils, fluids and capacities
| System | Oil or spec | Capacity |
|---|---|---|
| Engine | Deutz air-cooled diesel, direct injection, Euro II: F3L914 3 cylinders 3,236 cc (F50 38.3 kW, 207 N·m; F60 41 kW, 205 N·m) or F4L914 4 cylinders 4,314 cc (F70 52.4 kW, 263 N·m; F80 56.8 kW, 275 N·m). 102 x 132 mm | |
| Engine oil | 15W-40 (Akros Turbo), ACEA E4-96, API CF, SDFG OM-1991, MIL-L-2104 E level, MB 228.3 level | F50 and F60: 9.5 L; F70 and F80: 11 L. The handbook adds 1 L when the filter is changed |
| Coolant | None: the engine is air-cooled | |
| Valve clearances | Check your handbook: the chart checks the valve clearance at delivery only; the figure was not read | |
| Gearbox and rear axle (with lift, auxiliaries and hydrostatic steering) | 10W-30 or 20W-30 UTTO, API GL-4 (Akros Multi, SDFG OT-1891) | 41 L |
| Front axle centre differential (4WD) | 10W-30 UTTO, API GL-4 (Akros Multi FTC, SDFG OT-1891) | 6 L |
| Front axle side reducers (4WD), each | As the centre differential | 1.5 L each |
| Brake and clutch reservoirs | ATF Dexron II D (Akros Matic, SDFG OF-1691) | Up to MAX |
| Grease points | NLGI 2 lithium grease (Akros Grease T2, SDFG GR-1202 L) | - |
Specifications
| Idle / maximum speed | 650 rpm / 2,400 rpm (both plus or minus 50) |
| Injector setting | 250 bar |
| Air filter | Dry, 7 to 8 inch, with safety cartridge |
| Gearbox | 16+8, 20+10 or 30+15 speeds depending on the model |
Known problems
Which handbook
A newer Euro II manual (F3L914 and F4L914) for the Agrolux F50, F60, F70 and F80. The earlier 913-engined Agrolux 60, 70, F60, F70, F80 manual is in deutz-agrolux-60-70-f60-f70-f80 with different intervals.
Chart columns
The chart's first block counts in 250-hour steps (250, 500, 750, 1,000 and 1,250); the second in 300-hour steps. The engine rows use the first block, giving 500 hours.
Air-cooled
No coolant. Keep the cooling fins and oil cooler clean.
Sources
More from Deutz-Fahr.