Deutz-Fahr Agrotron TTV 1130 / 1145 / 1160 service schedule

Deutz-Fahr Agrotron TTV · First-generation TTV. Manuals dated June 2003 (TTV 1130, 1145, 1160 Mk3) and December 2006 (TTV 1145, 1160). Check your serial plate.

Every maker's service job for the Deutz-Fahr Agrotron TTV 1130 / 1145 / 1160, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.

Track your Agrotron TTV 1130 / 1145 / 1160 for free

Versions: Agrotron TTV 1130 (2003 manual, Mk3); Agrotron TTV 1145 (2003 and 2006 manuals); Agrotron TTV 1160 (2003 and 2006 manuals)

Service intervals

Job	When
Drive belt tension and condition check	every 250 hours
Engine oil and filter change	every 500 hours or every year
Transmission, hydraulic and steering oil filters change (between oil changes)	every 500 hours
Fuel filter change and water drain	every 1,000 hours or every year
Engine air filter main and safety elements	every 1,000 hours or every year
Transmission, rear axle and hydraulic oil and filters change	every 1,200 hours or every year
Front axle centre housing and hub reduction oil change	every 1,200 hours or every year
Front PTO oil change	every 1,500 hours or every year
Valve clearance check (dealer)	every 1,500 hours
Coolant change	every 2,400 hours or every 2 years
Brake and clutch fluid change	every 2 years

Service jobs and parts

Drive belt tension and condition check

Engine · every 250 hours

The service plan marks the belt check at every 250-hour step. A slack or cracked belt can stop the alternator and the water pump.

Part	Qty	Notes	Part number
Drive belt	1	V-belt; Partao fits list names TTV 1130, 1145, 1160. Length not given: check against your old belt.	1145187

Step-by-step

Engine off, key out. Look along the belt for cracks, fraying and oil.
Press on the belt midway between the pulleys and check the tension as the handbook says.
Replace a worn belt.

Tools: Torch

Engine oil and filter change

Engine · every 500 hours or every year

Deutz-Fahr's service plan says change the engine oil and the oil filter together after the first 50 hours, then every 500 hours or once a year, whichever comes first. If the diesel has more than 0.5% sulphur, halve the interval.

Part	Qty	Notes	Part number
Engine oil	1	15W-40. ACEA E3-96 / API CF / MB 228.3, ≈17.5 L plus ≈1 L with filter. Aztec Oils match: EMPROTEC EHPD 15W-40	check your handbook
Engine oil filter	1	Deutz-Fahr number from Kramp's listing for TTV 1130, 1145 and 1160. Also sold as Mann W95026, Fleetguard LF16011, Donaldson P550778	01183574
Sump drain plug washer	1	check your handbook (not read)	check your handbook

Step-by-step

Park on level ground, stop the engine, set the parking brake and take the key out. Warm the engine first, then let it settle for a minute or two. Hot oil burns, so wear gloves.
Put the tray under the sump, undo the drain plug and let all the oil run out.
Put a tray under the engine oil filter, unscrew the old filter and throw it away. Wipe the seat clean.
Smear the new filter's seal with clean engine oil and screw it on by hand until it seats, then tighten as your handbook says.
Refit the drain plug with a good washer and fill with about 17.5 L plus 1 L for the filter, up to the top mark on the dipstick.
Run the engine for a few minutes, stop it, wait a minute and recheck the level and for leaks.
Take the old oil and filter to a proper disposal point.

Tools: Drain tray (25 L), Socket set and spanners, Funnel, Gloves, Shop towels, Oil filter strap wrench

Transmission, hydraulic and steering oil filters change (between oil changes)

Transmission · every 500 hours

The service plan has the transmission, hydraulic and steering oil filters changed at the first 50 hours and then every 500 hours. This is more often than the oil change, so it has its own task. They are changed again with the oil at 1,200 hours.

Part	Qty	Notes	Part number
Transmission oil filter	1	check your handbook	check your handbook
Hydraulic oil filter	1	Genuine number per Sparex S.174320 (element), listed for Agrotron 1130, 1145 and 1160 TTV. It is the hydraulic element only; check which filter your tractor has.	04437774
Steering oil filter	1	check your handbook	check your handbook

Step-by-step

Park level, engine off, key out. Clean round each filter housing.
Put a tray under each filter and remove the old filter.
Fit the new filters with a smear of clean oil on the seals.
Start the engine and check for leaks, then check the transmission oil level and top up with the same oil.

Tools: Strap wrench, Drain tray, Shop towels

Fuel filter change and water drain

Fuel · every 1,000 hours or every year

The service plan has the fuel filter changed at the first 50 hours and then every 1,000 hours or once a year, with both stages changed together on a double-stage system. Drain water from the filter before starting after the winter.

Part	Qty	Notes	Part number
Fuel filter (single stage) or first and second stage filters	1	Aftermarket: Fleetguard. No genuine number found; check your handbook. Agriline sells engine service kit FFK1246 (oil filter, both air filters and 2 fuel filters) for the BF6M1013E/C	FFK1246

Step-by-step

Stop the engine and let it cool. Put a tray under the filter.
Undo the filter (turn the ring or canister the way the OFF arrow shows) and drain it into the tray.
Fit the new filter with a lightly oiled seal, filling it with clean diesel first if the filter allows.
Bleed the air out of the system as the handbook shows, start the engine and check for leaks.

Tools: Strap wrench, Drain tray, Shop towels

Engine air filter main and safety elements

Engine · every 1,000 hours or every year

The plan says replace the main element once a year or every 1,000 hours, and the safety (inner) element every 2,000 hours. In between, clean the main element only when the yellow warning light on the Infocenter shows. Never clean the safety element.

Part	Qty	Notes	Part number
Air filter main element	1	Genuine number per Sparex S.109675 (outer), listed for Agrotron 1130, 1145 and 1160 TTV. Also written 01180867.	04415901
Air filter safety element	1	Genuine number per Sparex S.109676 (inner), listed for Agrotron 1130, 1145 and 1160 TTV. Also written 01180872.	04415903

Step-by-step

Stop the engine and open the air filter housing.
Take out the main element. If the warning light was on and it is not damaged, blow it out gently from the inside, never from the outside.
Replace the main element once a year or at 1,000 h, and the safety element at 2,000 h.
Wipe out the housing, refit the elements and close the housing properly. Empty the dust valve.

Tools: Clean cloth, Compressed air at low pressure (inside out)

Transmission, rear axle and hydraulic oil and filters change

Transmission · every 1,200 hours or every year

The lubricant table says change the transmission and rear axle oil, which is shared with the hydraulics, every 1,200 hours or once a year. Change the oil filters at the same time. The service plan also has the filters changed more often (see the separate filter task).

Part	Qty	Notes	Part number
Transmission and hydraulic oil	1	15W-30. Akros Multi VT, API GL4, SDFG OT 1801-B, ZF TE-ML 06B/07/12, ≈104 L. Aztec Oils match: AGRITEC SUTO 15W-30	check your handbook
Transmission oil filter	1	The service plan lists transmission, hydraulic and steering filters; no genuine numbers found. check your handbook	check your handbook
Hydraulic oil filter	1	Genuine number per Sparex S.174320 (element), listed for Agrotron 1130, 1145 and 1160 TTV. It is the hydraulic element only; check which filter your tractor has.	04437774
Steering (hydrostatic) oil filter	1	check your handbook	check your handbook

Step-by-step

Warm the oil by working the tractor first. Park on level ground, engine off, parking brake on.
Fit trays under the transmission and rear axle drain plugs and drain the oil.
Replace the transmission, hydraulic and steering filters as the handbook shows.
Refit the drain plugs. Fill to the dipstick or sight glass mark with the specified 15W-30 (≈104 L).
Run the engine, cycle the gears and the hydraulics, stop it and recheck the level.

Tools: Drain trays (about 110 L in total), Socket set, Funnel and filler pump, Torque wrench

Front axle centre housing and hub reduction oil change

Front axle · every 1,200 hours or every year

The lubricant table gives 1,200 hours for the front axle centre housing and the two hub reductions. The service plan says change this oil at least once a year.

Part	Qty	Notes	Part number
Front axle centre housing oil	1	80W-90. API GL5, SDFG OP-1705 LS (Akros Gear EP 90 LS), ≈5.8 L. Aztec Oils match: TRANSMATEC EP-5 80W-90	check your handbook
Hub reduction oil (each)	2	80W-90. API GL5, SDFG OP-1705 LS, ≈0.8 L each. Aztec Oils match: TRANSMATEC EP-5 80W-90	check your handbook
Drain plug washers	3	check your handbook	check your handbook

Step-by-step

Park level, engine off, key out. Warm the oil by driving first.
Drain the centre housing and each hub reduction into a tray.
Refill the centre housing with about 5.8 L and each hub with about 0.8 L of 80W-90, up to the level plugs.
Refit the plugs and check for leaks.

Tools: Drain tray, Socket set, Oil pump

Front PTO oil change

Drivetrain · every 1,500 hours or every year

The service plan has the front PTO oil changed every season or every 1,500 hours of front PTO use. The manuals disagree on the amount: 0.9 L in the 2003 manual and 1.8 L in the 2006 manual.

Part	Qty	Notes	Part number
Front PTO oil	1	80W-90. API GL5, SDFG OP-1705 LS, 0.9 L (2003 manual) or 1.8 L (2006 manual): fill to the level mark	check your handbook

Step-by-step

Park level, engine off, key out.
Drain the PTO housing, refit the plug, then fill to the level mark with 80W-90 and refit the filler plug.
If your tractor has no front PTO, skip this task.

Tools: Drain tray, Socket set

Valve clearance check (dealer)

Engine · every 1,500 hours

The service plan has the valve clearance checked at the first 50 hours and then every 1,500 hours, at least 2 hours after the engine has been stopped. It is a Deutz-Fahr dealer job.

Part	Qty	Notes	Part number
Rocker cover gasket	1	Genuine number per Sparex S.163361, listed for Agrotron 1130, 1145 and 1160 TTV.	04205894

Step-by-step

Have a dealer check the clearance. The figures are in your engine handbook; the manuals read here do not give them.

Tools: Dealer job

Coolant change

Cooling · every 2,400 hours or every 2 years

The lubricant table and service plan say replace the coolant every 2 years or 2,400 hours. Check the level regularly and top up with the same mixture.

Part	Qty	Notes	Part number
Coolant	1	55% water, 45% Akros Farm Flu antifreeze (SDFG EC-1548 G), ≈21 L	check your handbook

Step-by-step

Work only on a cold engine; never open the radiator cap hot.
Drain the system, flush with clean water and refill with the 55/45 mix to the mark.
Run the engine up to temperature, let it cool and top up. Coolant is poisonous to animals, so catch it all.

Tools: Drain tray, Funnel, Antifreeze tester

Brake and clutch fluid change

Brakes · every 2 years

The service plan says change the primary and secondary brake and clutch circuit fluid at least every two years.

Part	Qty	Notes	Part number
Brake and clutch fluid	1	ISO VG 22 oil. Akros Matic, SDFG OF-1691; fill to MAX	check your handbook

Step-by-step

Have the circuit flushed and bled as the handbook shows, topping up only with the specified fluid.
Check the brake pedals and the handbrake afterwards.

Tools: Brake bleed kit, Clean container

Oils, fluids and capacities

System	Oil or spec	Capacity
Engine	Deutz 6-cylinder turbo diesel, BF6M1013 family (a UK filter-kit seller lists the BF6M1013E/C for the TTV 1130). Check the engine plate.
Engine oil	15W-40. Akros Turbo 15W40: ACEA E3-96, API CF, SDFG OM 1991, MIL-L-2104 E, MB 228.3 level.	17.5 L, plus about 1 L when the filter is changed (the table marks 17.5 L with a note: with filter + 1 L)
Coolant	21 L: 55% water and 45% Akros Farm Flu antifreeze (SDFG EC-1548 G). Change every 2 years or 2,400 h.
Valve clearances	Check your handbook (the schedule has the valve clearance checked at 50 h, then every 1,500 h, a dealer job)
Engine oil	15W-40. ACEA E3-96, API CF, SDFG OM 1991, MIL-L-2104 E, MB 228.3 (Akros Turbo 15W40)	17.5 L (+1 L with filter)
Transmission, rear axle and hydraulics (shared)	15W-30. Akros Multi VT: API GL4, SDFG OT 1801-B, ZF TE-ML 06B, 07, 12	104 L
Front axle centre housing	80W-90. Akros Gear EP 90 LS: API GL5, MIL-L-2105 D, SDFG OP-1705 LS	5.8 L
Front axle hub reductions (each)	80W-90. Akros Gear EP 90 LS: API GL5	0.8 L each (two)
Front PTO	80W-90. Akros Gear EP 90 LS: API GL5	0.9 L in the 2003 manual; 1.8 L in the 2006 manual
Brake and clutch control	ISO VG 22 oil. Akros Matic, SDFG OF-1691 (the Agrofarm manual lists the same OF 1691 as ATF Dexron II D)	Fill to the MAX mark
Grease points	NLGI 2 lithium grease. Akros Grease T2, SDFG GR-1202 L	Every 50 h per the table
Coolant	55% water, 45% Akros Farm Flu (SDFG EC-1548 G)	21 L

Specifications


Engine	6-cylinder turbo diesel, 17.5 L sump; Deutz BF6M1013 family
Gearbox	TTV continuously variable, ZF transmission (the plate lists ZF TE-ML approvals)
First service	Engine oil, filters and valve clearance at 50 h; intervals halved if the diesel has more than 0.5% sulphur
Manuals read	Agrotron TTV 1130/1145/1160 Mk3 (2003) and Agrotron TTV 1145/1160 (2006), French, from deutz-passion.fr

Known problems

First service at 50 hours

The service plan has a first change of the engine oil and filters, the fuel filter, the transmission filters and a valve clearance check at 50 hours. Do not skip it on a newly bought used tractor with no service history.

Sulphur in the diesel

Deutz-Fahr says halve the service intervals if the diesel has more than 0.5% sulphur (check imported or red diesel).

Front PTO oil quantity

The 2003 manual gives 0.9 L and the 2006 manual 1.8 L; fill to the level mark.

Engine oil quantity

The table gives 17.5 L with a note: with filter, add 1 L.

Fault codes: Deutz EMR4 engine codes (SPN / FMI)

Engine (Deutz EMR4 controller)

Code	Meaning	What to do
SPN 91 / FMI 3, 4, 11	Accelerator pedal sensor voltage high, low or fault unknown	Check the pedal plug; use hand throttle if safe and call your dealer.
SPN 94 / FMI 1	Fuel low-pressure reading far too low	Check fuel level and filter, and bleed. Call your dealer.
SPN 94 / FMI 3, 4	Fuel low-pressure sensor voltage high / low	Check the sensor plug; call your dealer.
SPN 97 / FMI 3, 4	Water-in-fuel sensor voltage high / low	Drain the water separator; check the plug.
SPN 100 / FMI 1	Oil pressure far too low	Stop the engine at once. Check the oil level; do not run it if correct: call your dealer.
SPN 100 / FMI 0	Oil pressure far above range	Call your dealer.
SPN 100 / FMI 3, 4	Oil pressure sensor voltage high / low	Check the oil level and gauge; call your dealer.
SPN 102 / FMI 1	Charge air (boost) pressure far too low	Check the air filter and intake hoses for leaks.
SPN 102 / FMI 2, 3, 4	Charge air pressure sensor erratic, voltage high or low	Check the sensor plug; call your dealer.
SPN 105 / FMI 0	Charge air temperature far too high	Clean the intercooler and radiator; reduce load.
SPN 105 / FMI 3, 4	Charge air temperature sensor voltage high / low	Check the plug; call your dealer.
SPN 110 / FMI 0	Coolant temperature far too high	Stop and let the engine idle and cool; check coolant only when cool.
SPN 110 / FMI 3, 4	Coolant temperature sensor voltage high / low	Watch the temperature gauge; call your dealer.
SPN 111 / FMI 1	Coolant level far too low	Stop; check the coolant level when cool and top up with the correct mix.
SPN 157 / FMI 3, 4	Rail pressure sensor voltage high / low	Call your dealer.
SPN 168 / FMI 2, 3, 4	Battery voltage erratic, too high or too low	Check battery terminals and charging.
SPN 190 / FMI 0	Engine speed far too high (overspeed)	Ease off; stop if it continues. Call your dealer.
SPN 190 / FMI 2, 8, 12	Engine speed sensor erratic, abnormal pulses or faulty	Call your dealer.
SPN 1109 / FMI 2	Engine protection system requested shutdown	Let the engine shut down and check oil, coolant and fuel before restarting once.
SPN 3251 / FMI 0, 1	Particulate filter (DPF) differential pressure above / below range	Run a regeneration as the handbook describes; call your dealer if it returns.
SPN 639 / FMI 14	CAN bus special instruction	Call your dealer.

Repair guides

Hard starting or loss of power: fuel and air filters (BF6M 1013 engines) (Moderate, 45 minutes to 1 hour): Engine slow to start, power loss, black smoke, or the yellow air filter light on the Infocentre.
Valve clearance check (BF6M 1013, Agrotron TTV / 200 / 210–265) (Hard, 3–4 hours): Ticking from the rocker cover, loss of power or rough running, or the valve clearance check is due.
Transmission or hydraulic filter warning lamp: filter changes between oil changes (Moderate, 1–1½ hours): Transmission or hydraulic filter warning lamp, slow lift, sluggish hydraulics, or a newly bought tractor with no service history.
Low brake or clutch fluid, soft pedal: use the correct oil (not DOT fluid) (Moderate, 1 hour): Brake or clutch reservoir low, long or spongy pedal, warning lamp, or the 2-year fluid change is due.
Charging or cooling trouble: drive belt tension and condition (Easy, 30 minutes): Squealing belt, battery not charging, engine running hot, or a worn or cracked belt.

The full step-by-step guides are in Farmyard Workshop once you add your tractor.

Parts list with genuine part numbers

Maker part numbers per site service schedule: Agrotron TTV 1130 / 1145 / 1160 (First-generation TTV. Manuals dated June 2003 (TTV 1130, 1145, 1160 Mk3) and December 2006 (TTV 1145, 1160). Check your serial plate.); check serial range

Engine service

Part	Part number	Qty	Notes
Engine oil filter	01183574	1	Deutz-Fahr number from Kramp's listing for TTV 1130, 1145 and 1160. Also sold as Mann W95026, Fleetguard LF16011, Donaldson P550778
Air filter main element	04415901	1	Genuine number per Sparex S.109675 (outer), listed for Agrotron 1130, 1145 and 1160 TTV. Also written 01180867.
Air filter safety element	04415903	1	Genuine number per Sparex S.109676 (inner), listed for Agrotron 1130, 1145 and 1160 TTV. Also written 01180872.
Rocker cover gasket	04205894	1	Genuine number per Sparex S.163361, listed for Agrotron 1130, 1145 and 1160 TTV.
Drive belt	1145187	1	V-belt; Partao fits list names TTV 1130, 1145, 1160. Length not given: check against your old belt.

Fuel

Part	Part number	Qty	Notes
Fuel filter (single stage) or first and second stage filters	FFK1246	1	Aftermarket: Fleetguard. No genuine number found; check your handbook. Agriline sells engine service kit FFK1246 (oil filter, both air filters and 2 fuel filters) for the BF6M1013E/C

Transmission and hydraulics

Part	Part number	Qty	Notes
Hydraulic oil filter	04437774	1	Genuine number per Sparex S.174320 (element), listed for Agrotron 1130, 1145 and 1160 TTV. It is the hydraulic element only; check which filter your tractor has.

Sources

Open Farmyard Workshop