Deutz-Fahr 6 Series: 6130 TTV service schedule
Deutz-Fahr 6 Series · 2014–2020 (6190 P-Cshift) and 2017 on (6130 TTV). Other 6 Series models and years: check your handbook.
Covers the Deutz-Fahr 6 Series: 6130 TTV (2017 on) and 6190 P-Cshift (2014–2020).
Every maker's service job for the Deutz-Fahr 6 Series: 6130 TTV, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.
Track your 6 Series: 6130 TTV for freeVersions: 6130 TTV (4-cylinder, 2017 on); 6190 P-Cshift (6-cylinder TCD 6.1 L06 4V, Tier 4i, 2014–2020)
Service intervals
| Job | When |
|---|---|
| Engine oil and filter change | every 500 hours or every year |
| Front PTO oil change (6190) | every 500 hours |
| Transmission, rear axle and hydraulic oil and filters change | every 1,000 hours or every year |
| Front axle differential and hub reduction oil change | every 1,000 hours or every year |
| Coolant change | every 2,000 hours or every 2 years |
| Fuel filter change and water drain | when needed |
| Engine air filter elements | when needed |
Service jobs and parts
Engine oil and filter change
Engine · every 500 hours or every year
Eurol's page for both models says change the engine oil every 500 hours, with a first change at 50 hours on the 6190. Hengst's data sheet also gives 500 hours for the standard oil filter on the TCD 4.1 and 6.1 engines used in Deutz-Fahr Agrotron 6 and 7 tractors. Later Stage V 6 TTV tractors are quoted at 1,000 hours (see the notes).
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Engine oil | 1 | Grade not given by the sources; check your handbook. ≈12 L (6130 TTV) or ≈16 L (6190) | check your handbook |
| Engine oil filter | 1 | Aftermarket: Hengst. No genuine number found; E470H01 D28 is Hengst's standard service insert for TCD 4.1 and 6.1 engines (fitment for your engine not confirmed); check your handbook | E470H01 D28 |
Step-by-step
- Park on level ground, stop the engine, set the parking brake and take the key out. Warm the engine first, then let it settle. Hot oil burns, so wear gloves.
- Drain the oil, change the filter insert and fill to the dipstick mark with the oil your handbook specifies.
- Run the engine, stop it, wait a minute and recheck the level and for leaks.
- Take the old oil to a proper disposal point.
Tools: Drain tray (25 L), Socket set and spanners, Funnel, Gloves, Shop towels, Oil filter strap wrench
Front PTO oil change (6190)
Drivetrain · every 500 hours
Eurol's page for the 6190 says change the front PTO oil (0.9 L) every 500 hours. The 6130 TTV page lists no front PTO; skip this task if you have none.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Front PTO oil | 1 | Grade not given by the sources; check your handbook. ≈0.9 L | check your handbook |
Step-by-step
- Park level, engine off, key out.
- Drain, refit the plug and refill to the level mark.
Tools: Drain tray, Socket set
Transmission, rear axle and hydraulic oil and filters change
Transmission · every 1,000 hours or every year
Eurol's pages say change the shared transmission and hydraulic oil every 1,000 hours or 12 months, and check the level every 50 hours. Change the filters with it.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Transmission and hydraulic oil | 1 | Grade not given by the sources; check your handbook. ≈81 L (6130 TTV) or ≈80 L (6190) | check your handbook |
| Transmission and hydraulic oil filters | 1 | check your handbook | check your handbook |
Step-by-step
- Work the tractor first so the oil is warm. Park level, engine off, key out.
- Drain the oil, change the filters as the handbook shows and refill to the mark.
- Run the engine, cycle the hydraulics, stop and recheck the level.
Tools: Drain trays (about 90 L), Socket set, Funnel and filler pump
Front axle differential and hub reduction oil change
Front axle · every 1,000 hours or every year
Eurol's pages say change the front differential (8.5 L) and the front hub reductions (4 L each on the 6130 TTV, 2 L each on the 6190) every 1,000 hours or 12 months.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Front differential oil | 1 | Grade not given by the sources; check your handbook. ≈8.5 L | check your handbook |
| Front hub reduction oil | 2 | Grade not given by the sources; check your handbook. ≈4 L each (6130 TTV) or ≈2 L each (6190) | check your handbook |
Step-by-step
- Park level, engine off, key out.
- Drain and refill the differential and each hub reduction to the level plugs.
- Check for leaks.
Tools: Drain tray, Socket set, Oil pump
Coolant change
Cooling · every 2,000 hours or every 2 years
Eurol's pages say change the coolant every 2,000 hours or 24 months and check the level every 10 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Coolant | 1 | Grade not given by the sources; check your handbook. ≈15.5 L (6130 TTV) or ≈18 L (6190) | check your handbook |
Step-by-step
- Work only on a cold engine; never open the radiator cap hot.
- Drain, flush and refill with the coolant your handbook specifies.
- Run up to temperature, let it cool and top up. Coolant is poisonous to animals.
Tools: Drain tray, Funnel, Antifreeze tester
Fuel filter change and water drain
Fuel · when needed
No fuel filter interval could be found for these models. check your handbook.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Fuel filter | 1 | No genuine number found; check your handbook | check your handbook |
Step-by-step
- Look up the interval and number in your handbook. Drain water from the filter regularly.
Tools: Strap wrench, Drain tray
Engine air filter elements
Engine · when needed
No air filter interval could be found for these models. check your handbook. Fridayparts lists Deutz 04163646 as an air filter for the 5100 to 5130 and Agrotron 6140 to 6215 (TCD 3.6 L4), which may not fit your tractor.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Air filter main element | 1 | Reseller Fridayparts lists Deutz 04163646 for 6140, 6150, 6160, 6180, 6190, 6205 and 6215; confirm it fits yours Sparex lists 04163646 as the inner (safety) element, so check which element this number is before ordering. | 04163646 |
Step-by-step
- Check the air filter warning on the display and replace the element when your handbook says.
Tools: Clean cloth
Oils, fluids and capacities
| System | Oil or spec | Capacity |
|---|---|---|
| Engine | 6130 TTV: 4-cylinder FARMotion diesel (Eurol lists the KE4TA). 6190 P-Cshift: Deutz TCD 6.1 L06 4V, Tier 4i, with SCR (AdBlue). | |
| Engine oil | Check your handbook. Eurol's page does not give a grade. | 12 L (6130 TTV) or 16 L (6190 P-Cshift), per Eurol |
| Coolant | 15.5 L (6130 TTV) or 18 L (6190 P-Cshift), per Eurol. Grade: check your handbook. | |
| Valve clearances | Check your handbook | |
| Engine oil | Check your handbook | 12 L (6130 TTV) / 16 L (6190) |
| Transmission, rear axle and hydraulics (shared) | Check your handbook | 81 L (6130 TTV) / 80 L (6190) |
| Front axle differential | Check your handbook | 8.5 L (both) |
| Front hub reductions (each) | Check your handbook | 4 L each (6130 TTV) / 2 L each (6190) |
| Front PTO (6190) | Check your handbook | 0.9 L |
| Coolant | Check your handbook | 15.5 L (6130 TTV) / 18 L (6190) |
| AdBlue tank (6190) | AdBlue (SCR) | 35 L |
Specifications
| Source | Eurol oil advisor pages for the 6130 TTV (2017 on) and 6190 P-Cshift (2014 to 2020). No handbook read. |
Known problems
6190 rear hub reduction figure
Eurol's page for the 6190 lists rear hub reductions at 20 L each, which looks too high. Check your handbook before filling.
Longer oil interval on Stage V tractors
Deutz-Fahr's Canadian 6 TTV page says the engine oil interval is 1,000 hours (and 2,000 hours for the transmission and hydraulics) on the later 6190 to 6230 TTV Stage V tractors. Hengst says its newer long-life filter module lets the TCD 4.1 and 6.1 run 1,000 hours. Do not use 1,000 hours on the earlier tractors.
Other 6 Series models
6120 to 6230 models not listed in the variants were not researched. Capacities differ between engines and gearboxes.
Fault codes: Deutz EMR4 engine codes (SPN / FMI)
Engine (Deutz EMR4 controller)
| Code | Meaning | What to do |
|---|---|---|
| SPN 91 / FMI 3, 4, 11 | Accelerator pedal sensor voltage high, low or fault unknown | Check the pedal plug; use hand throttle if safe and call your dealer. |
| SPN 94 / FMI 1 | Fuel low-pressure reading far too low | Check fuel level and filter, and bleed. Call your dealer. |
| SPN 94 / FMI 3, 4 | Fuel low-pressure sensor voltage high / low | Check the sensor plug; call your dealer. |
| SPN 97 / FMI 3, 4 | Water-in-fuel sensor voltage high / low | Drain the water separator; check the plug. |
| SPN 100 / FMI 1 | Oil pressure far too low | Stop the engine at once. Check the oil level; do not run it if correct: call your dealer. |
| SPN 100 / FMI 0 | Oil pressure far above range | Call your dealer. |
| SPN 100 / FMI 3, 4 | Oil pressure sensor voltage high / low | Check the oil level and gauge; call your dealer. |
| SPN 102 / FMI 1 | Charge air (boost) pressure far too low | Check the air filter and intake hoses for leaks. |
| SPN 102 / FMI 2, 3, 4 | Charge air pressure sensor erratic, voltage high or low | Check the sensor plug; call your dealer. |
| SPN 105 / FMI 0 | Charge air temperature far too high | Clean the intercooler and radiator; reduce load. |
| SPN 105 / FMI 3, 4 | Charge air temperature sensor voltage high / low | Check the plug; call your dealer. |
| SPN 110 / FMI 0 | Coolant temperature far too high | Stop and let the engine idle and cool; check coolant only when cool. |
| SPN 110 / FMI 3, 4 | Coolant temperature sensor voltage high / low | Watch the temperature gauge; call your dealer. |
| SPN 111 / FMI 1 | Coolant level far too low | Stop; check the coolant level when cool and top up with the correct mix. |
| SPN 157 / FMI 3, 4 | Rail pressure sensor voltage high / low | Call your dealer. |
| SPN 168 / FMI 2, 3, 4 | Battery voltage erratic, too high or too low | Check battery terminals and charging. |
| SPN 190 / FMI 0 | Engine speed far too high (overspeed) | Ease off; stop if it continues. Call your dealer. |
| SPN 190 / FMI 2, 8, 12 | Engine speed sensor erratic, abnormal pulses or faulty | Call your dealer. |
| SPN 1109 / FMI 2 | Engine protection system requested shutdown | Let the engine shut down and check oil, coolant and fuel before restarting once. |
| SPN 3251 / FMI 0, 1 | Particulate filter (DPF) differential pressure above / below range | Run a regeneration as the handbook describes; call your dealer if it returns. |
| SPN 639 / FMI 14 | CAN bus special instruction | Call your dealer. |
Repair guides
- AdBlue (SCR) warnings on a 6190 P-Cshift or later 6 Series (Specialist, 15 minutes for checks; faults are a dealer job): AdBlue or exhaust warnings, reduced engine power, or AdBlue level low.
- Low power or oil service: air filter and the Hengst oil filter module (Moderate, 45 minutes): Loss of power, black smoke, or an oil service due on a TCD engine.
The full step-by-step guides are in Farmyard Workshop once you add your tractor.
Parts list with genuine part numbers
Maker part numbers per site service schedule: 6 Series: 6130 TTV (2017 on) and 6190 P-Cshift (2014–2020) (2014–2020 (6190 P-Cshift) and 2017 on (6130 TTV). Other 6 Series models and years: check your handbook.); check serial range
Engine service
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Engine oil filter | E470H01 D28 | 1 | Aftermarket: Hengst. No genuine number found; E470H01 D28 is Hengst's standard service insert for TCD 4.1 and 6.1 engines (fitment for your engine not confirmed); check your handbook |
| Air filter main element | 04163646 | 1 | Reseller Fridayparts lists Deutz 04163646 for 6140, 6150, 6160, 6180, 6190, 6205 and 6215; confirm it fits yours Sparex lists 04163646 as the inner (safety) element, so check which element this number is before ordering. |
Sources
- 6130 TTV (2017 on): engine 12 L 500 h, transaxle 81 L 1,000 h, front differential 8.5 L, hubs 4 L, coolant 15.5 L (Eurol oil advisor)
- 6190 P-Cshift (2014 to 2020): TCD 6.1 L06 4V, engine 16 L 500 h (50 h first change), transaxle 80 L, PTO 0.9 L, coolant 18 L, AdBlue 35 L (Eurol oil advisor)
- Oil filter element E470H D28: 500 h service life; new E470H01 D28 module gives 1,000 h (Hengst data sheet for the TCD 4.1 and 6.1 engines)
- Engine oil change 1,000 h and transmission 2,000 h on 6190 to 6230 TTV Stage V (Deutz-Fahr Canada)
- Air filter 04163646 fitment (reseller listing)
More from Deutz-Fahr.