JCB Fastrac 3170 / 3190 / 3200 / 3220 service schedule

JCB Fastrac 3000 series · check your handbook (the service manual covers 3170, 3190, 3200, 3220 and Plus models)

Covers the JCB Fastrac 3170 / 3190 / 3200 / 3220 (and Plus).

Every maker's service job for the JCB Fastrac 3170 / 3190 / 3200 / 3220, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.

Track your Fastrac 3170 / 3190 / 3200 / 3220 for free

Versions: 3170, 3190, 3220 (15 L engine oil); 3200 (17.5 L engine oil)

Service intervals

Job	When
Grease propshafts, PTO shafts and steering swivels	every 50 hours or every month
Engine oil and filter change	every 500 hours or every 6 months
Fuel, transmission and hydraulic filters	every 500 hours or every 6 months
Front hub oil change	every 500 hours or every 6 months
Gearbox, axle oil and air filter	every 1,000 hours or every year
Coolant, brake and hydraulic fluid	every 2,000 hours or every 2 years
Valve clearance	every 5,000 hours or every 4 years

Service jobs and parts

Grease propshafts, PTO shafts and steering swivels

Chassis · every 50 hours or every month

The JCB schedule greases these every 50 hours or weekly.

Part	Qty	Notes	Part number
Grease	1	JCB HP Grease, lithium complex, NLGI 2. Aztec Oils match: VOLCATEC LITHIUM COMPLEX B-EP 2	check your handbook

Step-by-step

Wipe and grease the propshafts, PTO shafts and steering swivels.
Drain the fuel pre-filter and clean the air filter dust valve at the same time.

Tools: Grease gun

Engine oil and filter change

Engine · every 500 hours or every 6 months

JCB changes the engine oil and filter every 500 hours or 6 months with the recommended JCB oil. If you use an alternative oil, change it every 250 hours or 3 months.

Part	Qty	Notes	Part number
Engine oil	1	15W-40. JCB Engine Oil EP, API CH-4, 15 L (17.5 L on the 3200). Aztec Oils match: EMPROTEC SHPD-X 15W-40	check your handbook
Engine oil filter	1	Check your handbook or parts book	check your handbook

Step-by-step

Warm the engine, stop it, drain the oil.
Replace the filter, refill and check the level.

Tools: Drain tray (20 L), Filter wrench

Fuel, transmission and hydraulic filters

Fuel · every 500 hours or every 6 months

JCB replaces the fuel pre-filter and fuel filter, transmission oil filter and hydraulic fluid filter element every 500 hours or 6 months.

Part	Qty	Notes	Part number
Fuel pre-filter	1	Check your handbook or parts book	check your handbook
Fuel filter	1	Check your handbook or parts book	check your handbook
Transmission oil filter	1	Check your handbook or parts book	check your handbook
Hydraulic fluid filter element	1	Check your handbook or parts book	check your handbook

Step-by-step

Replace each filter, bleed the fuel system, and check for leaks.
Clean the air conditioning intake filter at the same time.

Tools: Filter wrench, Tray

Front hub oil change

Axles · every 500 hours or every 6 months

JCB lists the front hub oil at 500 hours or 6 months.

Part	Qty	Notes	Part number
Hub oil	1	80W-90. JCB Gear Oil HP90, 2.5 L each hub. Aztec Oils match: TRANSMATEC EP-4 80W-90	check your handbook

Step-by-step

Drain and refill each front hub.

Tools: Drain tray

Gearbox, axle oil and air filter

Transmission · every 1,000 hours or every year

JCB changes the gearbox oil (cleaning the strainer), front and rear axle oil and outer air filter element every 1,000 hours or yearly, and the air dryer desiccant canister.

Part	Qty	Notes	Part number
Gearbox oil	1	JCB Super Universal Agricultural Oil (API GL-4), 42 L. Aztec Oils match: AGRITEC HP-PRO	check your handbook
Axle oil	1	80W-90. JCB Gear Oil HP90: front 20 L, rear 27 L. Aztec Oils match: TRANSMATEC EP-4 80W-90	check your handbook
Outer air filter element	1	Check your handbook or parts book	check your handbook
Air dryer desiccant canister	1	Air dryer cartridge 15/920105 is listed by Fridayparts for Fastrac 2115 to 3230 and 8250 (JCB number as quoted by reseller).	15/920105

Step-by-step

Drain and refill the gearbox, cleaning the strainer.
Drain and refill the front and rear axles.
Fit a new outer air filter element and air dryer canister; clean the trailer brake line air filter.

Tools: Drain trays, Spanners

Coolant, brake and hydraulic fluid

Cooling · every 2,000 hours or every 2 years

JCB changes the coolant, brake fluid and hydraulic fluid (unless an oil sample says otherwise) and the inner air filter every 2,000 hours or 2 years.

Part	Qty	Notes	Part number
Coolant	1	JCB Four Seasons Antifreeze with water, 33 L	check your handbook
Brake fluid	1	DOT 4. Aztec Oils match: HYDRATEC DOT 4 BF	check your handbook
Hydraulic fluid	1	JCB HP46 or HP32, 120 L	check your handbook
Inner air filter element	1	Check your handbook or parts book	check your handbook

Step-by-step

Change the coolant, brake fluid and hydraulic fluid, clean the hydraulic tank suction strainers and fit the inner air filter.

Tools: Drain trays

Valve clearance

Engine · every 5,000 hours or every 4 years

JCB checks and adjusts valve clearance every 5,000 hours or 4 years.

Step-by-step

Book it with a JCB dealer.

Tools: Dealer

Oils, fluids and capacities

System	Oil or spec	Capacity
Engine	Cummins 6-cylinder turbo diesel
Engine oil	JCB Engine Oil EP 15W/40 (API CH-4 or ACEA E3/B3A3). Alternatives: JCB Super Multigrade 15W/40 (API CF4/SG), or 10W/30 below about -5 C; with an alternative oil change at 250 hours.	15 L (3170, 3190, 3220); 17.5 L (3200)
Coolant	33 L. JCB Four Seasons Antifreeze and Summer Coolant mixed with water.
Valve clearances	Check and adjust every 5,000 hours or 4 years; the figure is not in the source, check your handbook
Engine oil	15W-40 (JCB Engine Oil EP, API CH-4)	15 L (17.5 L on the 3200)
PTO, speed and range boxes (combined)	JCB Super Universal Agricultural Oil (API GL-4)	42 L
Hydraulic system	JCB Hydraulic Fluid HP46 (above 38 C) or HP32 (below 38 C)	120 L
Front axle housing	80W-90. JCB Gear Oil HP90 (API GL-5)	20 L
Front hubs (two)	80W-90. JCB Gear Oil HP90	2.5 L each
Rear axle	80W-90. JCB Gear Oil HP90	27 L
Front PTO transfer box (option)	80W-90. JCB Gear Oil HP90	3.0 L
Brakes (front and rear circuits)	DOT 4	0.75 L each
Coolant	JCB Four Seasons Antifreeze with water	33 L
Fuel	Diesel	350 L
Grease	JCB HP Grease, lithium complex, NLGI 2	-

Specifications


Service timing	Whichever comes first of hours or calendar time: 10 h daily, 50 h weekly, 500 h 6 months, 1,000 h yearly, 2,000 h 2 years

Known problems

First 100 hours

JCB wants a dealer service at 100 hours: engine oil and filter, fuel, transmission and hydraulic filters, and axle and hub oils.

Fault codes: SAE J1939 engine codes: how to read SPN and FMI

Any modern electronic diesel engine

Code	Meaning	What to do
SPN 91	Accelerator pedal position	Power may be limited. Check the pedal plug.
SPN 94	Fuel delivery (lift pump / filter) pressure	Check fuel level and filters; look for air in the fuel.
SPN 97	Water in fuel	Drain the water separator.
SPN 100	Engine oil pressure	FMI 1 means stop at once. Check the oil level.
SPN 102	Boost (turbo) pressure	Check air filter and intake for leaks.
SPN 105	Intake manifold (charge air) temperature	Clean the cooler and intake.
SPN 110	Engine coolant temperature	FMI 0 means overheating: stop and let it cool.
SPN 157	Common rail fuel pressure	Check fuel filters. Call your dealer.
SPN 168	Battery voltage	Check the battery, terminals and alternator.
SPN 174	Fuel temperature	Call your dealer if high or erratic.
SPN 190	Engine speed	Check the sensor plug if the rev counter misbehaves.
SPN 1136	Engine controller temperature	Let it cool; check engine bay ventilation.
SPN 3216	SCR catalyst conversion efficiency (exhaust AdBlue system)	Check DEF quality and level. Call your dealer.
SPN 3361	DEF (AdBlue) dosing unit	Check the DEF tank level; call your dealer.
SPN 4094	DEF (AdBlue) tank level	Fill the DEF tank. Power will be cut if it runs out.
FMI 0	Reading valid but well above normal (most severe)	Treat as a real problem: stop and check, for example temperature or pressure.
FMI 1	Reading valid but well below normal (most severe)	Treat as a real problem: for oil pressure, stop the engine at once.
FMI 2	Erratic, intermittent or wrong data	Check the plug and wiring at the sensor.
FMI 3	Voltage above normal or wiring shorted to supply	Sensor or wiring fault. Check the plug.
FMI 4	Voltage below normal or wiring shorted to ground	Sensor or wiring fault. Check the plug.
FMI 5	Current below normal or open circuit	A wire has come off or a part has failed. Check the plug.
FMI 6	Current above normal or grounded circuit	A short to ground. Check wiring for chafing.
FMI 7	Mechanical part not responding or out of adjustment	Not electrical: check the part moves freely.
FMI 8	Abnormal frequency or pulse width	Signal fault. Check the sensor and wiring.
FMI 9	Abnormal update rate (message arriving too slowly or too fast)	Often a network fault. Switch off and restart.
FMI 10	Abnormal rate of change	Reading changing too fast. Check the sensor.
FMI 11	Failure detected, exact cause not known	Call your dealer.
FMI 12	Controller or device faulty	Usually needs a replacement part: call your dealer.
FMI 13	Out of calibration	Call your dealer to recalibrate.
FMI 14	Special instructions: the maker has its own steps	Call your dealer.
FMI 15 / 16	Reading above normal: least severe / moderately severe	Warning stage. Ease off and check, for example coolant.
FMI 17 / 18	Reading below normal: least severe / moderately severe	Warning stage. Check the system named.
FMI 19	Data received over the network carries an error flag	Check the sensor plugged into the other controller.
FMI 20 / 21	Data drifted high / drifted low compared with other readings	Sensor may be failing. Call your dealer.
FMI 31	The condition named by the SPN exists (no more detail), or not available	Read the SPN name for what it means.

Parts list with genuine part numbers

JCB Fastrac 3170 / 3190 / 3200 / 3220 (and Plus) - maker filter/service sheets and parts lists already cited on the site entry; serial splits are in the row notes

Brakes

Part	Part number	Qty	Notes
Air dryer desiccant canister	15/920105	1	Air dryer cartridge 15/920105 is listed by Fridayparts for Fastrac 2115 to 3230 and 8250 (JCB number as quoted by reseller).

Sources

Open Farmyard Workshop