John Deere 6310 service schedule
John Deere 6010 series · c. 1997–2002 (sources differ; see notes)
Covers the John Deere 6310 (also 6110, 6210, 6405, 6410, 6310L/S, 6410L/S, 6510L/S).
Every maker's service job for the John Deere 6310, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.
Track your 6310 for freeVersions: SyncroPlus or PowrReverser gearbox; PowrQuad gearbox
Service intervals
| Job | When |
|---|---|
| Engine oil and filter change | every 250 hours or every year |
| Cab activated carbon filters (where fitted) | every 500 hours or every year |
| Fuel filters (primary and final) | every 500 hours |
| Transmission and hydraulic oil filters | every 750 hours |
| Front PTO oil filter (where fitted) | every 750 hours |
| Engine air filter elements | every 1,500 hours or every 2 years |
| Cab fresh air and recirculation filters | every 1,500 hours or every 2 years |
| Transmission and hydraulic oil change | every 1,500 hours |
| Brake strip and inspection (PowrQuad) | every 3,000 hours |
| Coolant replacement | when needed |
Service jobs and parts
Engine oil and filter change
Engine · every 250 hours or every year
A UK buyer's guide to the 6010 series gives engine servicing every 250 hours. Deere's later filter sheet allows 500 hours (first change at 100 hours, then yearly at the latest), but only with Plus-50 II oil, a genuine filter and diesel under 15 ppm sulphur; otherwise it says 250 hours. On a tractor this age, stay at 250 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Engine oil | 1 | 15W-40 (10W-30, 5W-40 or 0W-40 in colder weather). Plus-50 II, ≈12 L. Aztec Oils match: EMPROTEC EHPD 15W-40 | check your handbook |
| Engine oil filter | 1 | Deere 6010 series sheet | RE59754 |
Step-by-step
- Warm the engine, then park on level ground, lower the linkage, loader and implements to the ground, stop the engine, take the key out and chock the wheels.
- Let it stand a few minutes. Hot oil burns, so wear gloves.
- Remove the sump plug and let the oil drain fully.
- Remove the oil filter, check the old seal came off, and wipe the filter head clean.
- Oil the new filter seal and fit it hand-tight as marked on the filter.
- Refit the drain plug and fill with Plus-50 II to the full mark.
- Run the engine for a minute, check for leaks, stop it and recheck the level.
Tools: Drain tray (15 L), Filter wrench, Spanner for sump plug, Funnel, Rags, Gloves
Cab activated carbon filters (where fitted)
Cab · every 500 hours or every year
Carbon filters protect the driver when spraying. Deere says never clean them, and replace them every 500 hours or 1 year, or with the engine primary air filter, whichever comes first.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Activated carbon filter, left-hand | 1 | First-time fit kit is AL158985 | L156235 |
| Activated carbon filter, right-hand | 1 | L156236 |
Step-by-step
- Stop the engine and take the key out.
- Open the cab filter covers and remove the carbon filters. Wear gloves and a mask; they may hold spray residue.
- Bag the old filters and dispose of them as chemical waste.
- Fit the new filters and check the covers seal.
Tools: Screwdriver, Dust mask, Gloves
Fuel filters (primary and final)
Fuel · every 500 hours
Deere's 6010 series sheet says replace the fuel filters every 500 hours. Water or dirt in the diesel ruins the injection pump and injectors.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Primary fuel filter | 1 | RE509208 | |
| Final fuel filter | 1 | 109 mm long | RE62419 |
Step-by-step
- Stop the engine, take the key out and chock the wheels. Keep naked flames away.
- Clean around both filters so dirt cannot get in.
- Drain any water from the filter bowl into a container.
- Remove the old filters and fit the new ones with clean seals.
- Bleed the fuel system with the hand primer as your handbook describes.
- Start the engine and check for leaks.
Tools: Container for fuel, Filter wrench, Rags, Gloves
Transmission and hydraulic oil filters
Transmission · every 750 hours
Deere's sheet says change the transmission and hydraulic filters together after the first 100 hours, then every 750 hours. The hydraulic filter number depends on the size of the hydraulic pump. This applies to tractors without IVT.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Transmission oil filter | 1 | 158 mm long | AL221066 |
| Hydraulic oil filter, 25 cm³ pump | 1 | Same number as the transmission filter | AL221066 |
| Hydraulic oil filter, 41 cm³ pump | 1 | Instead of AL221066 if you have the larger pump | RE34958 |
| Hy-Gard for topping up | 1 | Aztec Oils match: AGRITEC UTTO | check your handbook |
Step-by-step
- Park on level ground, lower the linkage, loader and implements fully, stop the engine, take the key out and chock the wheels.
- With the engine off, work the spool valve and linkage controls to relieve hydraulic pressure before opening anything.
- Let hot oil cool before starting; it burns.
- Clean around each filter, then remove both filters and catch the oil.
- Fit new filters with oiled seals, hand-tight.
- Start the engine, run it briefly, stop it and top up Hy-Gard to the correct level. Check both filters for leaks.
Tools: Drain tray, Filter wrench, Rags, Gloves
Front PTO oil filter (where fitted)
PTO · every 750 hours
Deere's sheet lists a separate front PTO oil filter for the 6110–6410, replaced every 750 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Front PTO oil filter | 1 | L114404 |
Step-by-step
- Lower the front linkage and anything on it to the ground, stop the engine, take the key out and chock the wheels.
- Clean around the filter, remove it and catch the oil.
- Fit the new filter with an oiled seal, hand-tight.
- Run the front PTO briefly, stop, check for leaks and top up with Hy-Gard (≈3.5 L system).
Tools: Drain tray, Filter wrench, Rags
Engine air filter elements
Engine · every 1,500 hours or every 2 years
Deere says the main element may be cleaned up to 5 times and is replaced every 1,500 hours or 2 years. The safety element is never cleaned and is replaced at every third main element change or after 1,500 hours, whichever comes first.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Main (primary) air filter | 1 | 6110–6410, L and S models; the 6605 takes AL78869 | AL78223 |
| Safety (secondary) air filter | 1 | 6110–6410, L and S models; the 6605 takes AL78870 | AL78224 |
Step-by-step
- Stop the engine and take the key out. Never run the engine with the filter out.
- Open the housing and take out the main element.
- Only remove the safety element when it is due; never clean it.
- Wipe the housing out with a damp cloth. Do not blow dirt down the intake.
- Fit the new element(s), check they seat evenly and close the housing.
Tools: Torch, Damp cloth
Cab fresh air and recirculation filters
Cab · every 1,500 hours or every 2 years
Deere says clean them as required and replace every 1,500 hours or 2 years, or with the engine primary air filter, whichever comes first.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Cab fresh air filter, standard | 2 | Heavy-duty alternative AL225554. 'Advantage' tractors take one, not two | AL225552 |
| Cab recirculation filter | 2 | AL71259 |
Step-by-step
- Stop the engine and take the key out.
- Open the filter covers and remove the elements.
- Wear a dust mask. Tap the filters out gently if cleaning, or fit new ones if due.
- Refit the covers and check they seal.
Tools: Screwdriver, Dust mask
Transmission and hydraulic oil change
Transmission · every 1,500 hours
A UK buyer's guide to the 6010 series says the back-end oil and filters are changed every 1,500 hours on PowrQuad tractors, and that the interval depends on the gearbox. For SyncroPlus or PowrReverser, check your handbook. Both filters are always changed with the oil.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Hy-Gard oil | 1 | UTTO tractor transmission oil. ≈52 L SyncroPlus/PowrReverser, ≈49 L PowrQuad, plus 3 L with four-wheel drive. Aztec Oils match: AGRITEC UTTO | check your handbook |
| Transmission oil filter | 1 | Change with the oil | AL221066 |
| Hydraulic oil filter | 1 | AL221066 with the 25 cm³ pump, RE34958 with the 41 cm³ pump | check your handbook |
Step-by-step
- Park on level ground, lower the linkage, loader and implements fully, stop the engine, take the key out and chock the wheels.
- With the engine off, work the spool valve and linkage controls to relieve hydraulic pressure.
- Let hot oil cool for a while, then drain it from the drain plugs.
- Look at the old oil and the suction screen for brake-lining debris (see the brake check).
- Refit the plugs and fit new transmission and hydraulic filters.
- Fill with Hy-Gard, run the engine, work the hydraulics through their full travel, lower everything and recheck the level.
Tools: Large drain tray (60 L), Spanners, Filter wrench, Pump or funnel, Gloves
Brake strip and inspection (PowrQuad)
Brakes · every 3,000 hours
A UK buyer's guide calls the brakes the weak link on PowrQuad 6010s. Worn linings spread debris through the shared transmission and hydraulic oil, damaging bearings and valve blocks. It advises stripping and inspecting the brakes every 3,000 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Brake discs and seals | 1 | Only if worn; check your handbook | check your handbook |
Step-by-step
- This is a workshop job. If you do not have the manual and lifting gear, have a dealer do it.
- Drain the back-end oil and look at it for brake-lining debris.
- Strip the brakes as the workshop manual describes and measure the discs.
- Replace worn discs before they break up, then refill with fresh Hy-Gard and new filters.
Tools: Workshop manual, Axle stands and splitting equipment, Drain tray
Coolant replacement
Cooling · when needed
Deere's sheet gives the quantity but not the change interval, so check your handbook and test the coolant every year.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Cool-Gard coolant | 1 | ≈13.5 L with cab, ≈11 L without | check your handbook |
Step-by-step
- Only work on a cold engine. Open the cap slowly to let pressure out.
- Drain the radiator and block into a tray. Dispose of old coolant properly.
- Refit the plugs and fill with Cool-Gard.
- Run the engine to working temperature with the heater on, let it cool and top up.
Tools: Drain tray, Hose, Coolant test strips
Oils, fluids and capacities
| System | Oil or spec | Capacity |
|---|---|---|
| Engine | John Deere 4.5 L 4-cylinder diesel (4045 family; 4045TL055 on the North American 6310) | |
| Engine oil | John Deere Plus-50 or Plus-50 II (viscosity for your climate: check your handbook) | ≈12 L |
| Coolant | John Deere Cool-Gard: ≈13.5 L with cab, ≈11 L without cab | |
| Valve clearances | Check your handbook. Valve clearance is not on Deere's filter sheet. | |
| Transmission and hydraulics (shared), SyncroPlus or PowrReverser | John Deere Hy-Gard | ≈52 L |
| Transmission and hydraulics (shared), PowrQuad | John Deere Hy-Gard | ≈49 L |
| Extra with creeper / four-wheel drive / TLS axle | John Deere Hy-Gard | +1 L / +3 L / +3 L |
| Front axle housing (four-wheel drive) | John Deere Hy-Gard | ≈5 L without TLS, ≈6 L with TLS, ≈3.6 L narrow axle |
| Front final drive housings, each | John Deere Hy-Gard | ≈0.8 L |
| Front PTO (where fitted) | John Deere Hy-Gard | ≈3.5 L |
| Fuel tank | Diesel | ≈116 L, ≈165 L or ≈185 L depending on build |
Specifications
| Engine power (6310) | 99 hp (73.8 kW) gross; 80 hp claimed PTO |
| Rated engine speed (6310) | 2,300 rpm |
| Transmissions (6310) | 12-speed synchronised, or 16- or 24-speed PowrQuad |
| Hydraulics (6310) | Closed-centre pressure/flow compensated, 200 bar (2,900 psi) |
| Rear lift (6310) | 2,222 kg (4,900 lb), Category II |
| PTO (6310) | 540/1000 rpm independent; front 1000 rpm PTO optional |
| Weight (6310) | 3,400–4,416 kg (7,497–9,735 lb), depending on build |
| Tyre pressures | Check your handbook |
Known problems
Brake debris in the back-end oil
On PowrQuad 6010s worn brakes can shed debris through the transmission and hydraulics, damaging bearings, valve blocks and the aluminium front plate.
Pick-up hitch latch
Muck can jam the spring-loaded interlock on the push-back pick-up hitch, so the latch pin locks before the hitch is fully up and the locking mechanism breaks. Check it works properly.
Front axle crosslink
A clunk from the front when you turn the wheel while standing still usually means the Panhard rod crosslink above the axle is worn.
Grease points easy to miss
The 6010 has only a few grease points, and they are easy to overlook.
Six-cylinder models differ
This entry covers the 4-cylinder models. The 6510, 6610, 6810 and 6910 have the 6.8 L six and different filters.
Fault codes: What the FMI part of a Deere SPN/FMI code means (also used by New Holland and Case IH engines)
All electronic controllers (J1939)
| Code | Meaning | What to do |
|---|---|---|
| FMI 00 | Reading is far too high (most severe) | Treat as serious. Check the thing it names (temperature, pressure, speed) and stop if it is an engine or oil reading. |
| FMI 01 | Reading is far too low (most severe) | Treat as serious. Check the level or pressure it names; stop if it is oil pressure or coolant. |
| FMI 02 | Signal is erratic, noisy or not believable | Check the sensor plug and wiring for damage, water or a loose pin. If it stays, dealer. |
| FMI 03 | Voltage too high or shorted to a power wire | Usually a wiring or sensor fault. Check the plug is fully home; otherwise dealer. |
| FMI 04 | Voltage too low or shorted to ground | Usually a wiring or sensor fault, chafed wire or wet plug. Dealer if it stays. |
| FMI 05 | Open circuit or current too low | Broken wire, unplugged connector or failed component. Check the plug; otherwise dealer. |
| FMI 06 | Short circuit or current too high | Damaged wire or failed component pulling too much current. Dealer. |
| FMI 07 | Mechanical part not responding or out of position | Something moved by the controller is stuck or not following. Dealer. |
| FMI 08 | Signal frequency or pulse width wrong | Speed or position sensor signal is wrong. Check the sensor plug and wiring; dealer. |
| FMI 09 | Signal arriving too slowly, late or missing | A message or sensor update has stopped. Check connectors; dealer. |
| FMI 10 | Signal changing too fast | Signal is jumping abnormally. Check connectors; dealer. |
| FMI 11 | Fault present, cause not identified | Dealer. |
| FMI 12 | Controller or device itself has failed | Dealer. Do not keep clearing the code. |
| FMI 13 | Out of calibration | The sensor or control needs calibrating. Dealer. |
| FMI 14 | Special instruction (meaning set by the maker) | Look up the exact SPN/FMI pair; dealer. |
| FMI 15 | Reading a little too high (least severe warning) | Early warning. Find the cause before it gets worse. |
| FMI 16 | Reading too high (moderately severe warning) | Warning level. Find the cause now and ease off the work. |
| FMI 17 | Reading a little too low (least severe warning) | Early warning. Find the cause before it gets worse. |
| FMI 18 | Reading too low (moderately severe warning) | Warning level. Check levels now and ease off the work. |
| FMI 19 | Data link (CAN bus) error between controllers | Check battery terminals and plugs; dealer if it stays. |
| FMI 31 | The named condition exists (used as an on/off flag) | Read the SPN description to see what condition is flagged. |
Fault codes: PowerTech 4.5 L / 6.8 L electronic engines: common SPN/FMI codes
Engine controller (ECU)
| Code | Meaning | What to do |
|---|---|---|
| 000028.03 | Throttle (B) signal voltage too high | Check the throttle pedal or lever plug is fully pushed in and not damaged; dealer if it stays. |
| 000028.04 | Throttle (B) signal voltage too low | Check the throttle plug and wiring; dealer if it stays. |
| 000029.03 | Throttle (A) signal voltage too high | Check the throttle plug and wiring; dealer if it stays. |
| 000029.04 | Throttle (A) signal voltage too low | Check the throttle plug and wiring; dealer if it stays. |
| 000091.03 | Throttle input voltage too high | Check the throttle plug and wiring; dealer if it stays. |
| 000091.04 | Throttle input voltage too low | Check the throttle plug and wiring; dealer if it stays. |
| 000091.09 | Throttle signal invalid | Check the throttle plug and wiring; dealer if it stays. |
| 000097.00 | Water in fuel detected all the time | Drain the fuel water separator now, using the drain tap on the filter housing, until clean fuel runs. Dealer if it keeps returning. |
| 000097.16 | Water in fuel detected | Drain the fuel water separator (drain tap on the filter housing) until clean fuel runs. |
| 000100.01 | Engine oil pressure extremely low | Stop the engine at once. Check the oil level and look for leaks. If the level is correct, do not run it again: call your dealer. |
| 000100.18 | Engine oil pressure moderately low | Stop and check the oil level and for leaks. Top up to the mark with the correct grade if low. If the level is right and the warning stays, do not work the engine: dealer. |
| 000100.03 | Engine oil pressure sensor voltage too high | Sensor or wiring fault. Check the sensor plug; dealer if it stays. Check the oil level now to rule out a real pressure problem. |
| 000100.04 | Engine oil pressure sensor voltage too low | Sensor or wiring fault. Check the sensor plug; dealer if it stays. Check the oil level now to rule out a real pressure problem. |
| 000105.00 | Manifold (intake) air temperature extremely high | Ease off the load, check the cooler and radiator for chaff and mud, and the air intake for blockage. |
| 000105.16 | Manifold air temperature moderately high | Ease off the load, clean the radiator and cooler screens; dealer if it stays. |
| 000105.03 | Manifold air temperature sensor voltage too high | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000105.04 | Manifold air temperature sensor voltage too low | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000107.00 | Air filter restricted | Stop at a safe time, clean or replace the air filter element as the handbook shows, and check the intake hose for splits. |
| 000110.00 | Engine coolant temperature extremely high | Stop working, idle for a minute to cool, then stop. Let it cool before opening anything. Check the coolant level, and clean the radiator and grille screens. Call your dealer if it comes back. |
| 000110.16 | Engine coolant temperature moderately high | Ease off the load and clean the radiator, grille and cooler screens. Check the coolant level when cold. Dealer if it keeps happening. |
| 000110.15 | Engine coolant temperature high (least severe) | Early warning: ease off the load, clean the radiator and grille screens, check the coolant level when cold. |
| 000110.03 | Engine coolant temperature sensor voltage too high | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000110.04 | Engine coolant temperature sensor voltage too low | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000111.01 | Engine coolant level low | Stop. Wait for the engine to cool fully, then check and top up the coolant to the mark and look for leaks. If it keeps dropping, dealer. |
| 000158.17 | ECU power-down error (battery power was removed too soon after switching off) | Switch off with the key and wait before isolating the battery. Check the battery terminals are tight and clean. |
| 000171.03 | Ambient air temperature signal out of range | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000174.00 | Fuel temperature extremely high | Ease off the load; dealer if it stays. |
| 000174.16 | Fuel temperature moderately high | Ease off the load; dealer if it stays. |
| 000174.15 | Fuel temperature high (least severe) | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000174.03 | Fuel temperature sensor voltage too high | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000174.04 | Fuel temperature sensor voltage too low | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000189.00 | Engine speed derate (power is being limited) | Look for other active codes; the engine is limiting itself for protection. Dealer. |
| 000190.00 | Engine overspeed, extreme | Stop the engine. Do not restart until your dealer has checked it. |
| 000190.16 | Engine overspeed, moderate | Ease off and avoid over-revving on downhills; dealer if it returns. |
| 000620.03 | Sensor supply voltage too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000620.04 | Sensor supply voltage too low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000629.13 | ECU (engine controller) error | Switch off and restart once. If it returns, dealer. |
| 000639.13 | CAN bus error (controllers not talking) | Check the battery terminals and engine harness plugs; dealer if it stays. |
| 000729.03 | Inlet air heater signal high | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000729.05 | Inlet air heater signal low | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000970.31 | Auxiliary engine shutdown switch is active | Check whether an external shutdown switch has been operated or is stuck. |
| 000971.31 | External engine derate switch is active | Check whether an external derate switch has been operated or is stuck. |
| 001109.31 | Engine shutdown warning: the engine is about to shut down | Stop and park safely now, before the engine stops itself. Check oil, coolant and look for other codes. |
| 001110.31 | Engine shutdown (protection has stopped the engine) | Leave it stopped. Check the oil and coolant levels and the other codes for the cause; dealer. |
| 001568.02 | Torque curve selection switch invalid | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 001569.31 | Fuel derate (power limited) | Look for other active codes; dealer. |
| 002000.13 | Security violation (controller security check failed) | Dealer: the controller or software does not match. |
Fault codes: PowerTech engines with Denso high-pressure common rail ('475'): injector, rail and pump SPN/FMI codes
Engine controller (ECU), injectors and common-rail pump
| Code | Meaning | What to do |
|---|---|---|
| 000094.03 | Fuel rail pressure sensor voltage too high | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000094.04 | Fuel rail pressure sensor voltage too low | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000094.10 | Fuel rail pressure loss detected | Check the fuel level and filters. Never slacken high-pressure fuel lines with the engine running or just stopped. Dealer. |
| 000094.13 | Fuel rail pressure higher than expected | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000094.17 | Fuel rail pressure not developed | Check the fuel level, filters and for air in the supply. If it will not start or keeps stalling, dealer. |
| 000611.03 | Electronic injector wiring shorted to power | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000611.04 | Electronic injector wiring shorted to ground | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000627.01 | Electronic injector supply voltage problem | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.07 | Crank and pump timing moderately out of sync | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.02 | Pump position sensor input noise | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.08 | Pump position sensor input missing | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.10 | Pump position sensor input pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.02 | Crank position input noise | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.08 | Crank position input missing | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.10 | Crank position input pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000676.03 | Glow plug relay voltage high | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000676.05 | Glow plug relay voltage low | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 001080.03 | Fuel rail pressure sensor supply voltage too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001080.04 | Fuel rail pressure sensor supply voltage too low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001347.03 | Pump return shorted high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001347.05 | Pump control valve error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001347.07 | Fuel rail pressure control error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001568.02 | Torque curve selection invalid | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 001069.09 | Tyre size invalid | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 001069.31 | Tyre size error | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000651.05 | Cylinder 1 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000651.06 | Cylinder 1 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000651.07 | Cylinder 1 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000652.05 | Cylinder 2 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000652.06 | Cylinder 2 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000652.07 | Cylinder 2 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000653.05 | Cylinder 3 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000653.06 | Cylinder 3 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000653.07 | Cylinder 3 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000654.05 | Cylinder 4 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000654.06 | Cylinder 4 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000654.07 | Cylinder 4 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000655.05 | Cylinder 5 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000655.06 | Cylinder 5 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000655.07 | Cylinder 5 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000656.05 | Cylinder 6 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000656.06 | Cylinder 6 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000656.07 | Cylinder 6 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
Fault codes: PowerTech engines with Stanadyne DE10 pump: pump-specific SPN/FMI codes
Engine controller (ECU) and rotary fuel injection pump
| Code | Meaning | What to do |
|---|---|---|
| 001076.00 | Pump control valve closing too slowly | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.01 | Pump control valve closing too quickly | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.03 | Pump solenoid current too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.05 | Pump solenoid circuit open | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.06 | Pump solenoid circuit severely shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.07 | Pump control valve closure not detected | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.10 | Pump solenoid circuit moderately shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.13 | Pump current decay time invalid | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.02 | Engine position sensor noise detected | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.08 | Engine position sensor signal missing | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.10 | Engine position sensor pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.01 | Timing (crank) sensor signal pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.02 | Crank position input noise | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.10 | Crank position input pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000627.04 | ECU unswitched (permanent) power missing | Check the engine controller fuse and battery feed; dealer if it stays. |
| 001079.03 | Sensor supply voltage too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001079.04 | Sensor supply voltage too low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000084.31 | Vehicle speed mismatch | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000091.07 | Throttle calibration invalid | The dealer will need to recalibrate the throttle. |
| 000091.10 | Throttle voltage low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000091.14 | Throttle voltage out of range | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000190.01 | Engine speed below normal, most severe | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
Fault codes: PowerTech engines with Bosch VP44 pump: pump-specific SPN/FMI codes
Engine controller (ECU) and electronic VP44 injection pump
| Code | Meaning | What to do |
|---|---|---|
| 000094.01 | Fuel supply pressure extremely low | Check the fuel level, the fuel filters (change if overdue) and for air leaks in the supply line. Dealer if it stays. |
| 000094.18 | Fuel supply pressure moderately low | Check the fuel level and filters and for air leaks in the supply line. |
| 000094.03 | Fuel supply pressure sensor voltage too high | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000094.04 | Fuel supply pressure sensor voltage too low | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000084.02 | Vehicle speed mismatch | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000629.19 | ECU to pump communication error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000632.02 | Fuel shut-off error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000632.05 | Fuel shut-off non-functional | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.02 | Pump position input noise | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.08 | Pump position input missing | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.10 | Pump position input pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.02 | Crank position input noise | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.08 | Crank position input missing | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.10 | Crank position input pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000810.02 | Calculated vehicle speed input noise | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000898.09 | Vehicle speed invalid or missing | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 001069.02 | Tyre size error (wrong size set for the speed calculation) | The dealer can set the correct tyre size. |
| 001076.02 | Pump has detected a defect | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001077.07 | Pump is trying to fuel without being commanded | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001077.11 | Pump supply voltage out of range | Check the battery and charging; dealer if it stays. |
| 001077.12 | Pump self-test error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001077.19 | Pump detected a communication error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001077.31 | Pump has put the engine into protection | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001078.07 | ECU and pump timing moderately out of sync | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001078.11 | ECU and pump speed out of sync | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001078.31 | ECU and pump timing extremely out of sync | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001079.03 | Sensor supply 1 voltage too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001079.04 | Sensor supply 1 voltage too low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001080.03 | Sensor supply 2 voltage too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001080.04 | Sensor supply 2 voltage too low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001485.02 | Pump power relay fault | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000627.04 | ECU unswitched power missing | Check the engine controller fuse and battery feed; dealer if it stays. |
| 000174.31 | Fuel temperature sensor faulty | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
Repair guides
- Rear brakes worn: strip, inspect and stop debris spreading (Hard, About a day per side): Weak or uneven braking, long pedal travel, the tractor pulling to one side, dark paste or flakes in the back-end oil, or filters blocking soon after a change.
- Pick-up hitch latch jamming or locking too early (Moderate, 1–3 hours): Hook will not release, the latch pin locks before the hitch is fully raised, the release cable does nothing, or the locking mechanism has broken.
- Front axle clunk: crosslink, pivot pin, kingpins and track rods (Moderate, 1 hour to check; 2–5 hours to renew parts): A clunk from the front when you turn the steering wheel left and right while standing still, wandering on the road, uneven front tyre wear, or play at the wheels.
- Overheating: water pump, thermostat and fan belt (Moderate, 1 hour for a thermostat; 3–4 hours for a pump): Temperature gauge climbing, coolant from the pump weep hole, a noisy pump bearing, a wobbling pulley, a squealing or slipping belt, or a heater that stays cold.
- Starter and alternator: no crank, slow crank or not charging (Moderate, 1–3 hours): Click but no crank, slow cranking, nothing when the key is turned, battery warning light on, or flat batteries.
The full step-by-step guides are in Farmyard Workshop once you add your tractor.
Parts list with genuine part numbers
John Deere Maintenance Parts Catalog PC4962 (6000/6010/6020 series, ed. 31-Aug-2010)
Filters
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Fuel pump | AL78405 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter element | AL78223 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Air filter | AL78224 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Oil filter | T19044 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter element | RE62419 | 1 | A=109 mm (4.3")( substitutes for RE62418,RE64450 application ). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Oil filter | AL156625 | 1 | length 158 mm ,FRONT( substitutes for AL77061). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Oil filter | AL156624 | 1 | length 120 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Oil filter | AL203060 | 1 | (E) length 205 mm ( substitutes for AL113475, AL112936). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter housing | AL112922 | 1 | (E) length 240 mm ( substitutes for AL113474). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter element | L101786 | 2 | (B)(C). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter element | L101794 | 2 | (B)(C). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Air filter | AL177185 | 2 | (B)(C)(F)( substitutes for AL111748,AL115625, AL119096). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Air filter | AL177184 | 2 | ( substitutes for AL119095). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Hydraulic filter | AL118036 | 1 | (A)REAR, length 240 mm ( substitutes for RE34958 application ). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Oil filter | RE59754 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter element | AL118321 | 1 | AUTOPOWR/JD-IVT( substitutes for AL151235). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Oil filter | AL203520 | 1 | (G) length 240 mm ( substitutes for AL112922). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter housing | L115579 | 1 | (A). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter element | AL71259 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Activated carbon air filter | AL158985 | 1 | KIT( substitutes for AL158991). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Activated carbon air filter | L156235 | 1 | LH. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Activated carbon air filter | L156236 | 1 | RH. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Fuel filter | RE517181 | 1 | ( order RE509208). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter element | RE509208 | 1 | (ALSO order ERR113565). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Fuel filter | AL153517 | 1 | (H). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Air filter | AL150288 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Air filter | AL172780 | 1 | length 183 mm (7-7/32")( substitutes for AL119839). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Fuel filter | RE509031 | 1 | (B)(E)(F). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter | L155288 | 2 | (C)(D)( substitutes for L116025). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Filter element | L152026 | 2 | (D). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Oil filter | AL203061 | 1 | Serial 376494-. (E)( substitutes for AL160771). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Activated carbon air filter | AL158986 | 1 | KIT. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Activated carbon air filter | L156225 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
Engine - Drive belt
| Part | Part number | Qty | Notes |
|---|---|---|---|
| V-belt | L114489 | 1 | 1930 mm (76"). Wear/service part |
| Belt | L114290 | 1 | (B)2385 mm (94"). Wear/service part |
| Belt | L111600 | 1 | (A)2460 mm (96"). Wear/service part |
| V-belt | L114468 | 1 | (A)(B)2515 mm (99"). Wear/service part |
| Belt | L111601 | 1 | (A)2475 mm (97"). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
Engine - Water pump
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Engine kit | RE70962 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ring | L41383 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Snap ring | A364R | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Fitting plug | RE46685 | 1 | M18X1.5. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Gasket | R123417 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Engine - Coolant pump with cast - iron housing
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Engine kit | RE70962 | 1 | ( also order R123417,R123226). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Gasket | R123417 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Engine - Thermostat
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Thermostat | AL161963 | 1 | Serial -425337. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Thermostat | AL171960 | 1425338- | ( substitutes for AL165569). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Engine
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Hose | L100591 | 1 | Serial -156052. ( substitutes for L78789). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Shroud | AL78568 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Clamp | AL37451 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Radiator | AL115002 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L114595 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L114594 | 1 | Serial -XXXXXX. (A). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L116094 | 1XXXXXX- | (B). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L111090 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Radiator | AL163357 | 1 | Serial -425337. ( substitutes for AL156287,AL157248,AL161423)( order AL168726,AL171960,L165847,L165843, L165802,L167143,(2)AL118044). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Screen | L168741 | 1 | Serial -425337. ( substitutes for L154025). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Shroud | AL167433 | 1 | Serial -425337. ( substitutes for AL156289). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L153010 | 1 | Serial -425337. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L154843 | 1 | Serial -425337. (A)(C)NOT6020. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L153258 | 1 | Serial -425337. (C)(D)NOT6020. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L116423 | 1 | Serial -425337. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Clamp | AL170672 | as required | Serial -425337. ( substitutes for AL112931). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L116445 | 1 | Serial -425337. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Clamp | AL64588 | as required | Serial -425337. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L156969 | 1 | Serial -425337. ( substitutes for L154920). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Radiator | AL168726 | 1425338-467487 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Radiator | AL176361 | 1 | Serial 467488-. ( substitutes for AL171542). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Screen | L154025 | 1425338-467487 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L154872 | 1425338- | (A)(B)(C). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L165802 | 1425338- | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L167143 | 1425338- | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L156549 | 1425338- | (E). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L165845 | 1425338- | (E). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L153922 | 1425338- | (E). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Clamp | TY22462 | 2425338- | (E)( substitutes for AR48236). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose | L153077 | 1 | Serial -425337. (D). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Clamp | L158828 | 2 | Serial -425337. (D). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Electrical - Starting motor
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Starter motor | AL110597 | 1 | 3.0KW. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Electrical - Fuses and diodes
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Diode | 57M7326 | 1 | Serial -127538. 3A. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Diode holder | AL152098 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Electrical - Alternator
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Alternator | AL78689 | 1 | Serial -116316. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Alternator | AL114092 | 1 | 14V/90A( order AL166645,L112969,L78085). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Alternator | AL114093 | 1 | 14V/115A( order AL166646,L112969,L78085). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Pulley with damper | L112969 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Flange nut | L78085 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Washer | 4M7055 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Washer | 4M7027 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Regulator | AL155404 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Alternator | AL166645 | 1 | 14V/90A. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Alternator | AL166646 | 1 | 14V/115A. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Electrical
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Alternator | AL111675 | 1 | 14V/90A( order AL166645). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Alternator | AL111676 | 1 | 14V/115A( order AL166646). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Alternator | AL119537 | 1 | 14V/150A( order AL171541)(INCLAL166647, L157496). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Centre sheave | AL157595 | 1 | (A)MARKEDAL156091(FORAL111675,OR AL111676)( order AL166836). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Centre sheave | AL157594 | 1 | (A)MARKEDAL156092(FORAL119537)( order AL166835. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Washer | 4M7055 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Washer | 4M7027 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Regulator | AL155404 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Centre sheave | AL166836 | 1 | 90A/115A(FORAL166645ORAL166646) ( substitutes for AL161112). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Centre sheave | AL166835 | 1 | 150A(FORAL166647). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Plug | L157496 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Regulator | AL172532 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Alternator | AL166645 | 1 | 14V/90A. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Alternator | AL166646 | 1 | 14V/120A. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Alternator | AL166647 | 1 | 14V/150A( order AL171541). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Bulb | R133301 | as required | 12V,21W. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Bulb | AL33162 | as required | 12V,2W. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Lamp | AL33163 | as required | 12V,5W. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Bulb | AL65575 | as required | 12V,1.2W. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Bulb | 57M7166 | as required | 12V,55/60W. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Bulb | 57M6844 | as required | 12V,40/45W. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Bulb | R136239 | as required | 12V,55W. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Bulb | 57M6498 | as required | 12V,5W. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Bulb | 57M6394 | as required | 12V,4W. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Bulb | 57M7019 | as required | 12V,55W. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Bulb | 57M7105 | as required | (B). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Lamp | 57M7615 | as required | (B). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Bulb | L150689 | as required | (A). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Lamp | AL117814 | as required | 12V,3W. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Lamp | AL117815 | as required | 12V,1.1W. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Brakes - Brake disk
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Brake actuating disc | L114091 | 2 | Serial -195231. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Piston | L75648 | 2 | Serial -165095. NOT6500,6500L. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Piston | L111978 | 2165096- | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Compression spring | AL174737 | 6 | Serial -165095. ( substitutes for AL38179,AL115254 application ). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Compression spring | AL115253 | 6 | Serial 165096-. ( substitutes for AL82308). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Spring | AL115529 | 6 | FORAL115570. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| O-ring | L56243 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| O-ring | L56246 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Brake disc | AL171954 | 2 | TK=4.9 mm ( substitutes for AL111498,AL159761, AL168781). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Brake disc | AL171955 | 2 | (A)(B)TK=5.9 mm ( substitutes for AL112982, AL159762,AL168782). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Disc | L114053 | 2195232- | TK=22 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Spring | AL115528 | 6 | (A). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Hydraulics
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Hydraulic pump | AL82777 | 1 | Serial -295450. ( order AL161041,AL154045,38H5013, 51M7048). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Piston replacement kit | RE51170 | 1 | Serial -295450. ( order AL161041,RE203743). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Seal kit | RE51171 | 1 | Serial -295450. ( order AL161041,RE203743). Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Control | RE46649 | 1 | Serial -295450. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic pump | AL82778 | 1 | Serial -287407. ( order AL161043,AL154045). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Piston replacement kit | RE43835 | 1 | Serial -287407. ( order AL161043,RE203720). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Seal kit | RE43836 | 1 | Serial -287407. Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Hydraulic pump | AL161041 | 1295451- | 25CM3( substitutes for AL151514,AL157201). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic pump (reman) | PG200864 | 1 | (A)25CM3. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic pump | AL161043 | 1287408- | 41CM3( substitutes for AL151513,AL157203). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic pump (reman) | PG200865 | 1 | (A)41CM3. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Gasket kit | AL158422 | 1 | ( substitutes for AL153884). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic pump | AL156333 | 1 | 23CM3( order AL163918,L34995,L115460,(4) 19M7660)( substitutes for AL110829,AL151025). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic pump | AL117812 | 1 | 27CM3( order AL156335,L34995,L115460,(4) 19M7660). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Gasket | L77317 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Gasket | L110745 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Adapter fitting | AL114392 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic pump | AL163918 | 1 | 23CM3( also order L34995,L115460,(4) 19M7660). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic pump | AL156335 | 1 | 28CM3( also order L34995,L115460,(4) 19M7660). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| O-ring | L34995 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Adapter fitting | L115460 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Screw | 19M7660 | 4 | M8X20. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Adapter fitting | L110743 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| O-ring | L53840 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Screw | 19M7603 | 4 | M6X20. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic quick coupler socket | AL157377 | 2 | Serial -401133. (A)( order AL202351,AL202352,AL163909)(SUB FORAL119349) |
| O-ring | 1M7045 | 1 | |
| Seal kit | AL157199 | 2 | Serial -401133. Wear/service part |
| O-ring | 51M7077 | 2 | |
| Seal kit | AL163869 | 1401134- | Wear/service part |
| Hydraulic quick coupler socket | AL166183 | 1401134- | MARKEDAL166183, length 120 mm ( order AL202351, AL202352)( substitutes for AL161531) |
| Hydraulic quick coupler socket | AL202352 | 1 | MARKEDAL202352( substitutes for AL178990, AL169646) |
| Hydraulic quick coupler socket | AL166182 | 1401134- | MARKEDAL166182, length 120 mm ( order AL202351, AL202352)( substitutes for AL161530) |
| Hydraulic quick coupler socket | AL202351 | 1 | MARKEDAL202351, length 98 mm ( substitutes for AL178989,AL169645) |
| Cap | L113470 | as required | ( substitutes for L79587). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Adapter fitting | L79589 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cap | L154628 | as required | ( substitutes for L79588). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hose fitting | L61369 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Washer | L101608 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| O-ring | T77814 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Elbow fitting | L78340 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Plug | L78338 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Case | L78337 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cap | L79081 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Tee fitting | L78339 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Sign | L79294 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Sign | L79293 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic reservoir | L100937 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cover | L101404 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Retainer | L101446 | 1 | (B). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Holder | AL81655 | 1 | (C). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cap screw | 19M7923 | 2 | M6X12. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Sign | L79291 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Sign | L79292 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Plug | L102154 | 1 | MARKEDI( substitutes for R96132). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Plug | L102155 | 1 | MARKEDII( substitutes for R96133). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Case | L114826 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Sleeve | L116326 | as required | (A)( substitutes for L113696)( also order 51M7077). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Spring | L102158 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cover | L102152 | 1 | NSEP( order AL120010). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cover | L102150 | 1 | NSEP( order AL120010). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Grommet | L165852 | 2 | ( substitutes for L114833,L116307). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Plug | L102156 | as required | MARKEDIII. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Plug | L102157 | as required | MARKEDIV. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Tee fitting | L78133 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Adapter fitting | L78165 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Hydraulics - Quick disconnect couplers
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Hydraulic quick coupler socket | AL150763 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Dust shield | L171561 | as required | ( substitutes for L62751). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic quick coupler socket | AL112951 | as required | length 95 mm ( order AL166181,40M7162). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Hydraulic quick coupler socket | AL166181 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| O-ring | 51M7045 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Front axle
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Tie rod assembly | AL68723 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Seal | L39305 | 4 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Shim | L40301 | 4 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Pin fastener | L36086 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Snap ring | 40M7195 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Link end | AL37193 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Clamp | L64251 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cap screw | 19M8616 | 1 | M10X50. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Lock nut | 14M7324 | as required | M10. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Tube | L64250 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cap screw | 19M7918 | 2 | M10X60. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Clamp | L39329 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Tie rod end | AL68724 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Tie rod assembly | AL37146 | 1 | |
| Clamp | L39328 | 1 | |
| Tie rod assembly | L39324 | 1 | |
| Tie rod end | AL37204 | 1 | |
| Tie rod assembly | L39325 | 1 | |
| Housing | L100236 | 1 | LH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Housing | L114787 | 1 | (A) LH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Housing | L100235 | 1 | RH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Housing | L114786 | 1 | (A) RH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Tapered roller bearing | JD10249 | 4 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| O-ring | L40317 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Snap ring | 40M1837 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Wheel bolt | L112112 | 16 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball bearing | R115119 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Snap ring | 40M5099 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Seal | AL79951 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Bearing | AL79901 | 4 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Seal | AL79902 | 4 | Listed for all 4-cylinder 6000/6010/6020 series; check serial. Wear/service part |
| Shim | L100102 | as required | TK=0,2 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Shim | L100103 | as required | TK=0,3 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Shim | L100104 | as required | TK=0,4 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Shim | L100105 | as required | TK=0,6 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Shim | L100106 | as required | TK=0,8 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Shim | L100107 | as required | TK=1,0 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Shim | L100109 | as required | TK=1,6 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Shim | L100111 | as required | TK=2,0 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cap screw | 19M8011 | 16 | M12X30(10.9). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Wing nut | 14M7345 | as required | M14. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Screw | L100239 | as required | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Screw | L114573 | as required | ( substitutes for L100239). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Housing | L151567 | 1 | LH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Housing | L151566 | 1 | RH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Snap ring | 40M7047 | 2 | ( substitutes for 40M1837). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Seal | AL154053 | 2 | (C). Wear/service part |
| Seal | AL154054 | 2 | (C). Wear/service part |
| Shim | T166150 | as required | TK=0,5 mm |
| Shim | T166149 | as required | TK=0,7 mm |
| Shim | T166145 | as required | TK=0,9 mm |
| Shim | T166148 | as required | TK=1,1 mm |
| Shim | T166147 | as required | TK=1,2 mm |
| Shim | T166146 | as required | TK=1,3 mm |
| Shim | T166151 | as required | TK=1,4 mm |
| Housing | L153260 | 1123070- | (C) LH ,MARKED4475305472 |
| Housing | L153259 | 1123070- | (C) RH ,MARKED4475305471 |
Front axle - Tie rod , narrow m fwd - axle
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Tie rod assembly | AL151999 | 1 | LH ( order AL177983,AL168711,L55605). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Tie rod assembly | AL151994 | 1 | RH ( order AL177982,AL168711,L55605). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball joint | AL152000 | 1 | LH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball joint | AL151995 | 1 | RH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Tie rod assembly | AL151996 | 1 | (A)( order AL80542). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Tie rod assembly | AL80542 | 1 | ( order AL168711). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Lock nut | 14M7513 | 1 | M22. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Nut | L55605 | 1 | M24. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball joint | AL177983 | 1 | LH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball joint | AL177982 | 1 | RH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Tie rod end | AL168711 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Front axle - Tie rod , m fwd - axle
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Tie rod assembly | AL116558 | 1 | LH ( order AL168708,AL168711) not for 6200, 6200L,6320L-6520L |
| Tie rod assembly | AL116559 | 1 | RH ( order AL168709,AL168711) not for 6200, 6200L,6320L-6520L |
| Ball joint | AL116740 | 1 | LH ( order AL168708) not for 6200,6200L, 6320L-6520L |
| Ball joint | AL116741 | 1 | RH ( order AL168709) not for 6200,6200L, 6320L-6520L |
| Tie rod assembly | AL80542 | 1 | ( order AL168711) not for 6200,6200L, 6320L-6520L |
| Lock nut | 14M7513 | 1 | M22, not for 6200,6200L,6320L-6520L |
| Nut | L55605 | 1 | not for 6200,6200L,6320L-6520L |
| Ball joint | AL168708 | 1 | LH , not for 6200,6200L,6320L-6520L |
| Ball joint | AL168709 | 1 | RH , not for 6200,6200L,6320L-6520L |
| Tie rod end | AL168711 | 1 | not for 6200,6200L,6320L-6520L |
Operator's station - Gas operated cylinder
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Gas operated cylinder | AL174356 | 1 | (A)( substitutes for AL78987). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball joint retainer | L112424 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball stud | R237474 | 1 | ( substitutes for R97588). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball joint retainer | 56M7007 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Gas operated cylinder | AL174088 | 1 | (E)( substitutes for AL152006). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Gas operated cylinder | AL174357 | 1 | (C)( substitutes for AL81578,AL114803). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball stud | R97588 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Gas operated cylinder | AL160699 | 1 | (D)( substitutes for AL82634). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball stud | 55M7007 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Ball stud | L78979 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
Operator's station
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Windscreen | L78726 | 1 | (A). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windscreen | L78733 | 1 | (B). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windscreen | L171336 | 1223898- | (B)(D)( substitutes for L112972). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L78534 | 1 | (C) RH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L78533 | 1 | (C) LH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L171332 | 1223898- | (D) RH ( substitutes for L114754). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L171331 | 1223898- | (D) LH ( substitutes for L114753). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Door | L169102 | 1 | LH ( substitutes for L77647). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L170677 | 1 | (E)( substitutes for L78989). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L78538 | 1 | (A)(B)(C) RH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L78537 | 1 | (A)(B)(C) LH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L171975 | 1 | (A)(D) RH ( also order L171980,03M7342)(SUB FORL113305,L170546). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L171976 | 1 | (A)(D) LH ( also order L171980,03M7342)(SUB FORL113306,L170547). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L78727 | 1 | Serial -118041. (C)(A)( substitutes for L156325,L171335)( order W/(2)AL81578). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L78728 | 1 | Serial -118041. (C)(B)( substitutes for L156325,L171335). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L75276 | 2 | (C). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windscreen | L166875 | 1 | ( substitutes for L155222,L157582). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windscreen | AL167656 | 1 | (A)( substitutes for AL157563,AL164203). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windscreen | L151751 | 1 | Serial -337621. (C)(D)( order L171338,AL157993). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L171338 | 1337622- | (C)(D)( substitutes for L155784). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windscreen | AL156651 | 1 | Serial -337621. (A)(C)(D)( order AL158149,AL157993). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windscreen | AL158149 | 1 | Serial 337622-. (A)(C)(D). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windscreen | AL156652 | 1 | (A)(C)(E). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L157629 | 1 | (H) only SE-MODELS( substitutes for L156898). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L171334 | 1 | RH ( substitutes for L151753). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L171333 | 1 | LH ( substitutes for L151752). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | L171335 | 1 | ( substitutes for L156325). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | AL174553 | 1 | (A)( substitutes for AL156653). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | AL152337 | 1 | (F). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Windowpane | AL156654 | 1 | (A)(F). Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Bracket | AL77483 | 1 | (A) LH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Bracket | AL77484 | 1 | (A) RH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Structural tubing | L78174 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Knob | L78176 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Rod | L78173 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Adapter fitting | L79784 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Washer | 24M7430 | 1 | 64X90X3 mm. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Rear view mirror | AL78021 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Rear view mirror glass | L79776 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Socket | L79777 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Holder | L79778 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Screw | 21M7423 | 4 | M6X30. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Washer | 24M7362 | 4 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Screw | L153130 | 4 | M8X30. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cap | L38797 | 1 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Holder | AL77485 | 1 | LH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Retainer | AL77486 | 1 | RH. Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Cap | L79775 | 2 | Listed for all 4-cylinder 6000/6010/6020 series; check serial |
| Adjuster | AL117249 | 1 | |
| Plug | L38892 | 4 | |
| Grip | L114911 | 1 | |
| Extension spring | L114912 | 1 | |
| Absorber | AL117251 | 1 | |
| Push pull cable | AL117255 | 1 | |
| Armrest | AL68100 | 1 | |
| Screw | L62483 | as required | |
| Screw | L62485 | 4 | |
| Extension spring | L114921 | 4 | |
| Absorber | AL117265 | 1 | |
| Snap ring | 40M7082 | 1 | |
| Pin fastener | L63562 | 1 | |
| Seat suspension | AL117269 | 1 | |
| Roller | L38855 | 4 | |
| Lock nut | 14M7166 | 2 | M8 |
| Bearing | L42041 | 4 | |
| Pin fastener | L114922 | 1 | |
| Bumper | L25678 | 2 | |
| Adjuster | AL117271 | 1 | |
| Snap ring | 0M7030 | 1 | |
| Seat suspension | AL117349 | 1 | ( substitutes for AL70634) |
| Spindle | AL70631 | 1 | |
| Adjuster | AL70633 | 1 | |
| Retainer | AL114692 | 1 | ( substitutes for AL70627) |
| Absorber | AL70629 | 1 | |
| Bumper | AL70636 | 1 | ( order AL117342) |
| Seat suspension | AL114703 | 1 | |
| Actuator | AL117342 | 1 | ( substitutes for AL111317) |
| Adjuster | AL117348 | 1 | |
| Retainer | AL117345 | 1 | |
| Absorber | AL117346 | 1 | |
| Strap | L61612 | 1 | |
| Rivet | L39011 | 2 | |
| Plate | L38890 | 1 | |
| Bar | L38862 | 1 | |
| Nut | L38861 | 1 | |
| Fork | AL38526 | 1 | |
| Extension spring | T82227 | 2 | |
| Retainer | AL36643 | 1 | |
| Needle bearing | AL64034 | 2 | |
| Pin fastener | AL41471 | 1 | |
| Plate | L38853 | 1 | |
| Seat suspension | AL117340 | 1 | |
| Seat suspension | AL117343 | 1 | |
| Washer | 4M7293 | 1 | |
| Extension spring | L61599 | 1 | |
| Screw | L61615 | 1 | |
| Clamp | L61607 | 1 | |
| Spring | L61610 | 1 | |
| Bush | L61601 | 2 | |
| Push nut | L61627 | 2 | |
| Lever | L61608 | 1 | |
| Seat suspension | AL117471 | 1 | (A) |
| Seat suspension | AL117457 | 1 | ( substitutes for AL70606) |
| Absorber | AL70602 | 1 | |
| Arrestor | AL117451 | 1 | |
| Actuator | AL117456 | 1 | |
| Push pull cable | AL117455 | 1 | |
| Push pull cable | AL70611 | 1 | |
| Wiring harness | AL117464 | 1 | |
| Wiring harness | AL117474 | 1 | (B) |
| Boot | AL117473 | 1 | (A) |
| Reservoir | AL166454 | 1 | ( substitutes for AL156145) |
| Compressed air hose | AL166460 | 1 | ( substitutes for L116667) |
| Seat suspension | AL156126 | 1 | ( substitutes for AL117461) |
| Seat suspension | AL114701 | 1 | |
| Compressor | AL166450 | 1 | ( substitutes for AL70620) |
| Push pull cable | AL70615 | 1 | (FORAL70617) |
| Absorber | AL70617 | 1 | ( order AL81880)MARKEDBOGE |
| Push pull cable | AL114804 | 1 | (FORAL81880) |
| Absorber | AL81880 | 1 | MARKEDSUSPA |
| Seat suspension | AL176197 | 1 | ( substitutes for AL77915) |
| Shield | AL70601 | 1 | |
| Lever | AL70586 | 1 | |
| Plate | AL70587 | 1 | |
| Spindle | AL70597 | 1 | |
| Spring assembly | AL70598 | 1 | ( order AL70597) |
| Seat back | AL70593 | 1 | (A)( substitutes for AL70906) |
| Escutcheon | AL70589 | 1 | LH |
| Cushion | AL70595 | 1 | |
| Seat back | AL70907 | 1128361- | |
| Cushion | AL70594 | 1 | (A) |
| Seat back | AL70596 | 1 | Serial -128360. ( order AL70907) |
| Armrest | AL66513 | 1 | |
| Screw | 19M7902 | as required | M8X16 |
| Washer | 24M7055 | as required | |
| Set screw | 22M7098 | as required | |
| Plug | L39751 | 2 | |
| Bush | L64675 | 2 | |
| Armrest | AL66514 | 1 | |
| Adjuster | AL117279 | 1 | |
| Lock nut | 4M7166 | as required | M8 |
| Lever | L114926 | 1 | |
| Extension spring | L114927 | 1 | |
| Escutcheon | AL117278 | 1 | |
| Shield | L114963 | 1 | |
| Washer | L79500 | 1 | |
| Lock nut | L58217 | 6 | |
| Mounting parts | AL117336 | 1 | |
| Washer | 4M7055 | 4 | |
| Extension spring | L64713 | 1 | |
| Grip | L114972 | 1 | |
| Bracket | L113889 | 1 | |
| Bracket | L113888 | 1 | |
| Lock nut | R168723 | 2 | ( substitutes for H80440) |
| Washer | 12M1646 | 1 | |
| Cap screw | 19H2247 | 2 | 7/16 |
| Label | R168102 | 2 | (A) |
| Label | R168701 | 2 | (B) |
| Label | R168702 | 2 | (C) |
| Cap screw | 9M7560 | 1 | M6X16 |
| Washer | 24M7251 | 3 | |
| Lock nut | 14M7165 | 1 | M6 |
| Lock nut | 14M7376 | 1 | M6 |
| Clamp | L79430 | 1 | |
| Spacer | L111038 | 4 | |
| Washer | 24M7178 | 4 | |
| Lock nut | 14M7167 | 4 | M10 |
| Hood | L113438 | 1 | |
| Seat belt | AL117734 | 1 | Wear/service part |
Operator's station - Window wipers
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Wiper blade | AL153660 | 1 | (A) length 500 mm ( substitutes for RE24201,AL153661 application ). Wear/service part |
| Wiper blade | AL153661 | 1 | length 600 mm ( substitutes for RE24201). Wear/service part |
| Wiper blade | AL113907 | 1 | (B)FRONT. Wear/service part |
| Wiper blade | AL113906 | 1 | (B)REAR. Wear/service part |
Operator's station - Seats
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Seat | AL164159 | 1 | (A)MSG85( order AL179257) |
| Seat | AL114618 | 1 | (E)MSG93-E12C( order AL154352) |
| Seat | AL164158 | 1 | (E)MSG83-B12O-SB( order AL179255)( substitutes for AL114832) |
Operator's station - Seat belt for super comfort seat msg 83
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Seat belt | AL117283 | 1 | Wear/service part |
Sources
- Plus-50 II grades (15W-40, 10W-30, 5W-40, 0W-40) and air-temperature chart (John Deere Plus-50 II data sheet)
- Plus-50 II 15W-40 data sheet (John Deere Australia/NZ)
- Filter part numbers, service intervals and all capacities (John Deere filter overview, 6010 series 6110–6410, Nov 2020)
- Years, power, gearboxes, hydraulics, lift, PTO, weight and fuel tanks (6310)
- Engine model and rated speed (6310)
- 250 h engine service, 1,500 h PowrQuad back-end oil, brake inspection every 3,000 h, hitch and crosslink faults (6010 buyer's guide)
- JD Maintenance Parts Catalog PC4962 (6000/6010/6020 series tractors, 31-Aug-2010), Scribd copy
More from John Deere.