John Deere 6620 service schedule

John Deere 6020 series · c. 2001–2006 (6920, TractorData; other models check your serial number)

Covers the John Deere 6620 (also 6520, 6820, 6920 and 6920S).

Every maker's service job for the John Deere 6620, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.

Track your 6620 for free

Versions: PowrQuad Plus / AutoQuad Plus; AutoPowr IVT

Service intervals

JobWhen
Engine oil and filter changeevery 250 hours or every year
Axle hub and rear axle bearings: greaseevery 250 hours
Cab activated carbon filters (where fitted)every 500 hours or every year
Fuel filters (primary and final)every 500 hours
AutoPowr transmission and hydraulic filter (AutoPowr only)every 500 hours
Transmission and hydraulic oil filtersevery 750 hours
Front PTO oil filter (where fitted)every 750 hours
Engine air filter elementsevery 1,500 hours or every 2 years
Cab fresh air and recirculation filtersevery 1,500 hours or every 2 years
Transmission and hydraulic oil changeevery 1,500 hours
Front axle oil change (four-wheel drive)every 1,500 hours
Front PTO oil change (where fitted)every 1,500 hours
Valve clearance check and adjustment (dealer job)every 2,000 hours
Coolant replacementevery 3,000 hours

Service jobs and parts

Engine oil and filter change

Engine · every 250 hours or every year

The operator's-manual summary for the 6620 Premium gives engine oil and filter every 250 hours. Deere's later 20- and 30-series sheets allow 500 hours or one year, but only with Plus-50 II oil, a genuine filter and diesel under 15 ppm sulphur. Stay at 250 hours unless you meet all three. The first change is at 100 hours.

PartQtyNotesPart number
Engine oil115W-40 (10W-40 or 5W-30 colder). Plus-50 / Torq-Gard Supreme, API CG-4 / CF-4, ≈19.5 L with filter. Aztec Oils match: EMPROTEC EHPD 15W-40check your handbook
Engine oil filter1Deere's 6020 sheet and the 6620 summary both give this number; Agriline lists it for the 6620RE504836
Step-by-step
  1. Warm the engine, then park on level ground, lower the linkage, loader and implements fully, stop the engine, take the key out and chock the wheels.
  2. Let it stand a few minutes. Hot oil burns, so wear gloves.
  3. Remove the sump plug and let the oil drain fully.
  4. Remove the oil filter, check the old seal came off, and wipe the filter head clean.
  5. Oil the new filter seal and fit it hand-tight as marked on the filter.
  6. Refit the drain plug and fill with Plus-50 oil to the full mark.
  7. Run the engine for a minute, check for leaks, stop it and recheck the level.

Tools: Drain tray (25 L), Filter wrench, Spanner for sump plug, Funnel, Rags, Gloves

Axle hub and rear axle bearings: grease

Chassis · every 250 hours

The 6620 summary gives the axle hub bearings every 250 hours and the rear axle bearings every 500 hours. It does not name the grease, so check your handbook.

PartQtyNotesPart number
Grease1Grade is not in the sources: check your handbookcheck your handbook
Step-by-step
  1. Park, stop the engine, take the key out and chock the wheels.
  2. Wipe the grease nipples on the axle hubs clean (and, at every second service, the rear axle bearings).
  3. Pump in grease until fresh grease just shows, then wipe off the excess.

Tools: Grease gun, Rags

Cab activated carbon filters (where fitted)

Cab · every 500 hours or every year

Carbon filters protect the driver when spraying. Never clean them: replace every 500 hours or once a year, or with the engine primary air filter, whichever comes first (Deere's 6020 sheet).

PartQtyNotesPart number
Activated carbon filter kit1Deere 6020 sheet kit; the 6620 summary lists the same numberAL158986
Step-by-step
  1. Stop the engine and take the key out.
  2. Open the cab filter covers and remove the carbon filters. Wear gloves and a mask; they may hold spray residue.
  3. Bag the old filters and dispose of them as chemical waste.
  4. Fit the new filters and check the covers seal.

Tools: Screwdriver, Dust mask, Gloves

Fuel filters (primary and final)

Fuel · every 500 hours

Both Deere's 6020 sheet and the 6620 summary give the fuel filters every 500 hours. Numbers depend on engine serial number: Deere's 6020 sheet gives RE62419 as the final filter up to engine serial 799999 and RE509031 with primary RE509208 after that; UK dealers list RE509032 (195 mm) as the six-cylinder 20-series final filter. Check against your engine plate.

PartQtyNotesPart number
Primary fuel filter1Deere 6020 sheet, engine serial 800000 on. Confirm for your serial numberRE509208
Final fuel filter1Deere 6020 sheet: RE62419 up to engine serial 799999, RE509031 from 800000. UK dealers also list RE509032 (195 mm); confirm for your serial numberRE509031
Step-by-step
  1. Stop the engine, take the key out and chock the wheels. Keep naked flames away.
  2. Clean around both filters so dirt cannot get in.
  3. Drain any water from the primary filter into a container.
  4. Remove the old filters and fit the new ones with clean seals.
  5. Prime the system with the hand primer as your handbook describes. Never slacken high-pressure pipes on a common-rail engine.
  6. Start the engine and check for leaks.

Tools: Container for fuel, Filter wrench, Rags, Gloves

AutoPowr transmission and hydraulic filter (AutoPowr only)

Transmission · every 500 hours

The 6620 summary lists a separate AutoPowr hydraulic/transmission filter every 500 hours. Deere's 6020 sheet shows the IVT filters at 750 hours; follow the shorter figure if you have AutoPowr and no newer handbook.

PartQtyNotesPart number
AutoPowr hydraulic/transmission filter16620 summary lists AL118321 / AL203061; Deere's 6020 sheet gives AL206482 up to serial 376493 and AL203061 from 376494. Confirm for your serial numberAL206482
Step-by-step
  1. Park on level ground, lower the linkage, loader and implements fully, stop the engine, take the key out and chock the wheels.
  2. With the engine off, work the SCV and linkage controls to relieve hydraulic pressure before opening anything.
  3. Clean around the filter, remove it and catch the oil.
  4. Fit the new filter with an oiled seal, hand-tight.
  5. Start the engine, run it briefly, stop it, check for leaks and top up Hy-Gard.

Tools: Drain tray, Filter wrench, Rags, Gloves

Transmission and hydraulic oil filters

Transmission · every 750 hours

Deere's 6020 sheet and the 6620 summary say change the hydraulic and transmission filters together after the first 100 hours, then every 750 hours. The hydraulic filter number depends on pump size and serial number.

PartQtyNotesPart number
Hydraulic oil filter1Deere 6020 sheet: AL118036 (25/41 cm³ pump); AL203060 up to serial 366729 or AL203061 from 366730 (27 cm³ pump). Confirm for your serial numberAL118036
Transmission oil filter1159 mm long, from Deere's 6020 sheetAL221066
Hy-Gard for topping up1UTTO tractor transmission oil. Aztec Oils match: AGRITEC UTTOcheck your handbook
Step-by-step
  1. Park on level ground, lower the linkage, loader and implements fully, stop the engine, take the key out and chock the wheels.
  2. With the engine off, work the SCV and linkage controls to relieve hydraulic pressure before opening anything.
  3. Let hot oil cool before starting; it burns.
  4. Clean around each filter, then remove both filters and catch the oil.
  5. Fit new filters with oiled seals, hand-tight.
  6. Start the engine, run it briefly, stop it and top up Hy-Gard to the correct level. Check both filters for leaks.

Tools: Drain tray, Filter wrench, Rags, Gloves

Front PTO oil filter (where fitted)

PTO · every 750 hours

Deere's filter sheets for this family give a separate front PTO oil filter, replaced every 750 hours. The PTO oil itself is changed with the 1,500-hour jobs.

PartQtyNotesPart number
Front PTO oil filter1From Deere's filter sheets for the 6010, 6020 and 6030 families; confirm for your serial numberL114404
Step-by-step
  1. Lower the front linkage and anything on it to the ground, stop the engine, take the key out and chock the wheels.
  2. Clean around the filter, remove it and catch the oil.
  3. Fit the new filter with an oiled seal, hand-tight.
  4. Run the front PTO briefly, stop, check for leaks and top up with Hy-Gard.

Tools: Drain tray, Filter wrench, Rags

Engine air filter elements

Engine · every 1,500 hours or every 2 years

Deere says the primary element may be cleaned up to 5 times and is replaced every 1,500 hours or 2 years. The secondary (safety) element is never cleaned and is replaced every third primary change or at 1,500 hours.

PartQtyNotesPart number
Primary (outer) air filter16620 summary and the 6015 sheet (6615 up to serial 391078) give AL172781; Deere's 6020 sheet gives AL172780, and Agriline lists AL150285 up to serial 391078. Confirm by measuring the old oneAL172781
Secondary (safety) air filter1AL150288
Step-by-step
  1. Stop the engine and take the key out. Never run the engine with the filter out.
  2. Open the housing and take out the primary element.
  3. Only remove the safety element when it is due; never clean it.
  4. Wipe the housing out with a damp cloth. Do not blow dirt down the intake.
  5. Fit the new element(s), check they seat evenly and close the housing.

Tools: Torch, Damp cloth

Cab fresh air and recirculation filters

Cab · every 1,500 hours or every 2 years

Clean as required; replace every 1,500 hours or 2 years, or with the engine primary air filter, whichever comes first.

PartQtyNotesPart number
Cab fresh air filter2Deere 6020 sheet, standard. Heavy-duty AL225554; earlier AL177184 / AL177185AL225552
Cab recirculation filter (with air con)2Deere 6020 sheet. The 6620 summary lists L152026 / L155288; confirm for your serial numberL214634
Step-by-step
  1. Stop the engine and take the key out.
  2. Open the filter covers and remove the elements.
  3. Wear a dust mask. Tap the filters out gently if cleaning, or fit new ones if due.
  4. Refit the covers and check they seal.

Tools: Screwdriver, Dust mask

Transmission and hydraulic oil change

Transmission · every 1,500 hours

The 6620 summary gives the transmission and hydraulic oil change every 1,500 hours, or every 1,000 hours on AutoPowr. Change the filters at the same time.

PartQtyNotesPart number
Hy-Gard oil1UTTO tractor transmission oil. ≈52 L PowrQuad / AutoQuad, ≈60 L AutoPowr (6620 Premium). Aztec Oils match: AGRITEC UTTOcheck your handbook
Hydraulic oil filter1Change with the oilAL118036
Transmission oil filter1Change with the oilAL221066
Step-by-step
  1. Park on level ground, lower the linkage, loader and implements fully, stop the engine, take the key out and chock the wheels.
  2. With the engine off, work the SCV and linkage controls to relieve hydraulic pressure before opening anything.
  3. Let hot oil cool for a while, then drain it from the drain plugs.
  4. Refit the plugs and fit new hydraulic and transmission filters.
  5. Fill with Hy-Gard, run the engine, work the hydraulics through their full travel, lower everything and recheck the level.

Tools: Large drain tray (70 L), Spanners, Filter wrench, Pump or funnel, Gloves

Front axle oil change (four-wheel drive)

Driveline · every 1,500 hours

The 6620 summary gives the front axle oil change every 1,500 hours.

PartQtyNotesPart number
Front axle oil1UTTO tractor transmission oil (Hy-Gard or JDM J20C). ≈6.6 L. Aztec Oils match: AGRITEC UTTOcheck your handbook
Step-by-step
  1. Park on level ground, stop the engine, take the key out and chock the wheels.
  2. Clean around the filler and drain plugs, then drain the axle housing into a tray.
  3. Refit the plug and refill to the level your handbook shows.
  4. Check for leaks after a short run.

Tools: Drain tray, Spanners, Funnel

Front PTO oil change (where fitted)

PTO · every 1,500 hours

The 6620 summary gives the front PTO oil change every 1,500 hours, with the filter at 750 hours.

PartQtyNotesPart number
Hy-Gard oil1UTTO tractor transmission oil. ≈3.5 L. Aztec Oils match: AGRITEC UTTOcheck your handbook
Front PTO oil filter1Change with the oilL114404
Step-by-step
  1. Lower the front linkage and anything on it to the ground, stop the engine, take the key out and chock the wheels.
  2. Drain the front PTO housing into a tray and refit the plug.
  3. Fit a new oil filter with an oiled seal.
  4. Refill with Hy-Gard to the level your handbook shows, run the PTO briefly and check for leaks.

Tools: Drain tray, Spanners, Filter wrench, Funnel

Valve clearance check and adjustment (dealer job)

Engine · every 2,000 hours

The 6620 summary gives valve clearance every 2,000 hours. TractorData lists 0.356 mm inlet and 0.457 mm exhaust, cold. Treat it as a dealer job unless you have the workshop manual.

PartQtyNotesPart number
Rocker cover gasket1Check your handbookcheck your handbook
Step-by-step
  1. Have the engine cold.
  2. Remove the rocker cover and turn the engine to the position your workshop manual gives for each cylinder.
  3. Measure inlet and exhaust clearances with feeler gauges and adjust any that are out.
  4. Refit the rocker cover with a sound gasket and run the engine to check for leaks.

Tools: Feeler gauges, Spanners, Socket set, Torque wrench

Coolant replacement

Cooling · every 3,000 hours

The 6620 summary gives a cooling system flush and new coolant every 3,000 hours. Test the coolant strength every year.

PartQtyNotesPart number
Cool-Gard coolant1≈24 L (6620 Premium); check your handbook for other modelscheck your handbook
Step-by-step
  1. Only work on a cold engine. Let it cool for at least an hour after work and open the cap slowly to let pressure out.
  2. Drain the radiator and block into a tray. Dispose of old coolant properly.
  3. Refit the plugs and fill with Cool-Gard.
  4. Run the engine to working temperature with the heater on, let it cool and top up.

Tools: Drain tray, Hose, Coolant test strips

Oils, fluids and capacities

SystemOil or specCapacity
EngineJohn Deere PowerTech 6068 6.8 L 6-cylinder turbo diesel (6068T 4V-CR on the 6620 Premium and 6920S)
Engine oilJohn Deere Plus-50 or Torq-Gard Supreme, SAE 15W-40 (10W-40 or 5W-30 colder), API CG-4 / CF-4≈19.5 L with filter (6620 Premium)
CoolantJohn Deere Cool-Gard premix, ≈24 L (6620 Premium)
Valve clearancesInlet 0.356 mm (0.014 in), exhaust 0.457 mm (0.018 in), cold (TractorData, 6920 engine). Dealer job.
Transmission and hydraulics (shared), PowrQuad / AutoQuadHy-Gard / JDM J20C or J20D≈52 L (6620 Premium; check your handbook for the 6820 and 6920)
Transmission and hydraulics (shared), AutoPowrHy-Gard / JDM J20C or J20D≈60 L (6620 Premium; check your handbook)
Front axle (MFWD)Hy-Gard or JDM J20C≈6.6 L (6620 Premium)
Front PTO (where fitted)Hy-Gard≈3.5 L

Specifications

Engine power (6620 Premium)6620 Premium: 130 hp (engine data in the maintenance summary); the 6920 is rated 150 hp net and the 6920S 160 hp net (TractorData)
Transmissions20-speed partial powershift; AutoPowr IVT on later machines
Hydraulics (6920)Closed-centre load-sensing, 200 bar (2,900 psi), 96 L/min
Tyres (6920)Front 16.9R28, rear 20.8R38
Tyre pressuresCheck your handbook

Known problems

Many filter variants

Fuel, air and hydraulic filter numbers all change with serial number on these tractors. Take the old part with you or give the dealer your serial numbers.

Four-cylinder sheet used for shared parts

Deere's 6020 filter sheet lists the 6120 to 6520L, which are four-cylinder. Only the parts shared with the six-cylinder 6068 engine are used here, and the 6620 summary confirms them.

Fault codes: PowerTech 4.5 L / 6.8 L electronic engines: common SPN/FMI codes

Engine controller (ECU)

CodeMeaningWhat to do
000028.03Throttle (B) signal voltage too highCheck the throttle pedal or lever plug is fully pushed in and not damaged; dealer if it stays.
000028.04Throttle (B) signal voltage too lowCheck the throttle plug and wiring; dealer if it stays.
000029.03Throttle (A) signal voltage too highCheck the throttle plug and wiring; dealer if it stays.
000029.04Throttle (A) signal voltage too lowCheck the throttle plug and wiring; dealer if it stays.
000091.03Throttle input voltage too highCheck the throttle plug and wiring; dealer if it stays.
000091.04Throttle input voltage too lowCheck the throttle plug and wiring; dealer if it stays.
000091.09Throttle signal invalidCheck the throttle plug and wiring; dealer if it stays.
000097.00Water in fuel detected all the timeDrain the fuel water separator now, using the drain tap on the filter housing, until clean fuel runs. Dealer if it keeps returning.
000097.16Water in fuel detectedDrain the fuel water separator (drain tap on the filter housing) until clean fuel runs.
000100.01Engine oil pressure extremely lowStop the engine at once. Check the oil level and look for leaks. If the level is correct, do not run it again: call your dealer.
000100.18Engine oil pressure moderately lowStop and check the oil level and for leaks. Top up to the mark with the correct grade if low. If the level is right and the warning stays, do not work the engine: dealer.
000100.03Engine oil pressure sensor voltage too highSensor or wiring fault. Check the sensor plug; dealer if it stays. Check the oil level now to rule out a real pressure problem.
000100.04Engine oil pressure sensor voltage too lowSensor or wiring fault. Check the sensor plug; dealer if it stays. Check the oil level now to rule out a real pressure problem.
000105.00Manifold (intake) air temperature extremely highEase off the load, check the cooler and radiator for chaff and mud, and the air intake for blockage.
000105.16Manifold air temperature moderately highEase off the load, clean the radiator and cooler screens; dealer if it stays.
000105.03Manifold air temperature sensor voltage too highCheck the sensor plug is fully home and the wiring is undamaged; dealer if it stays.
000105.04Manifold air temperature sensor voltage too lowCheck the sensor plug is fully home and the wiring is undamaged; dealer if it stays.
000107.00Air filter restrictedStop at a safe time, clean or replace the air filter element as the handbook shows, and check the intake hose for splits.
000110.00Engine coolant temperature extremely highStop working, idle for a minute to cool, then stop. Let it cool before opening anything. Check the coolant level, and clean the radiator and grille screens. Call your dealer if it comes back.
000110.16Engine coolant temperature moderately highEase off the load and clean the radiator, grille and cooler screens. Check the coolant level when cold. Dealer if it keeps happening.
000110.15Engine coolant temperature high (least severe)Early warning: ease off the load, clean the radiator and grille screens, check the coolant level when cold.
000110.03Engine coolant temperature sensor voltage too highCheck the sensor plug is fully home and the wiring is undamaged; dealer if it stays.
000110.04Engine coolant temperature sensor voltage too lowCheck the sensor plug is fully home and the wiring is undamaged; dealer if it stays.
000111.01Engine coolant level lowStop. Wait for the engine to cool fully, then check and top up the coolant to the mark and look for leaks. If it keeps dropping, dealer.
000158.17ECU power-down error (battery power was removed too soon after switching off)Switch off with the key and wait before isolating the battery. Check the battery terminals are tight and clean.
000171.03Ambient air temperature signal out of rangeNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
000174.00Fuel temperature extremely highEase off the load; dealer if it stays.
000174.16Fuel temperature moderately highEase off the load; dealer if it stays.
000174.15Fuel temperature high (least severe)Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
000174.03Fuel temperature sensor voltage too highCheck the sensor plug is fully home and the wiring is undamaged; dealer if it stays.
000174.04Fuel temperature sensor voltage too lowCheck the sensor plug is fully home and the wiring is undamaged; dealer if it stays.
000189.00Engine speed derate (power is being limited)Look for other active codes; the engine is limiting itself for protection. Dealer.
000190.00Engine overspeed, extremeStop the engine. Do not restart until your dealer has checked it.
000190.16Engine overspeed, moderateEase off and avoid over-revving on downhills; dealer if it returns.
000620.03Sensor supply voltage too highFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000620.04Sensor supply voltage too lowFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000629.13ECU (engine controller) errorSwitch off and restart once. If it returns, dealer.
000639.13CAN bus error (controllers not talking)Check the battery terminals and engine harness plugs; dealer if it stays.
000729.03Inlet air heater signal highNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
000729.05Inlet air heater signal lowNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
000970.31Auxiliary engine shutdown switch is activeCheck whether an external shutdown switch has been operated or is stuck.
000971.31External engine derate switch is activeCheck whether an external derate switch has been operated or is stuck.
001109.31Engine shutdown warning: the engine is about to shut downStop and park safely now, before the engine stops itself. Check oil, coolant and look for other codes.
001110.31Engine shutdown (protection has stopped the engine)Leave it stopped. Check the oil and coolant levels and the other codes for the cause; dealer.
001568.02Torque curve selection switch invalidNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
001569.31Fuel derate (power limited)Look for other active codes; dealer.
002000.13Security violation (controller security check failed)Dealer: the controller or software does not match.

Fault codes: PowerTech engines with Denso high-pressure common rail ('475'): injector, rail and pump SPN/FMI codes

Engine controller (ECU), injectors and common-rail pump

CodeMeaningWhat to do
000094.03Fuel rail pressure sensor voltage too highCheck the sensor plug is fully home and the wiring is undamaged; dealer if it stays.
000094.04Fuel rail pressure sensor voltage too lowCheck the sensor plug is fully home and the wiring is undamaged; dealer if it stays.
000094.10Fuel rail pressure loss detectedCheck the fuel level and filters. Never slacken high-pressure fuel lines with the engine running or just stopped. Dealer.
000094.13Fuel rail pressure higher than expectedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000094.17Fuel rail pressure not developedCheck the fuel level, filters and for air in the supply. If it will not start or keeps stalling, dealer.
000611.03Electronic injector wiring shorted to powerFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000611.04Electronic injector wiring shorted to groundFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000627.01Electronic injector supply voltage problemFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000637.07Crank and pump timing moderately out of syncFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000636.02Pump position sensor input noiseFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000636.08Pump position sensor input missingFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000636.10Pump position sensor input pattern errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000637.02Crank position input noiseFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000637.08Crank position input missingFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000637.10Crank position input pattern errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000676.03Glow plug relay voltage highNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
000676.05Glow plug relay voltage lowNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
001080.03Fuel rail pressure sensor supply voltage too highFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001080.04Fuel rail pressure sensor supply voltage too lowFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001347.03Pump return shorted highFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001347.05Pump control valve errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001347.07Fuel rail pressure control errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001568.02Torque curve selection invalidNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
001069.09Tyre size invalidNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
001069.31Tyre size errorNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
000651.05Cylinder 1 injector circuit openCheck the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer.
000651.06Cylinder 1 injector circuit shortedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000651.07Cylinder 1 injector delivery failureFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000652.05Cylinder 2 injector circuit openCheck the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer.
000652.06Cylinder 2 injector circuit shortedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000652.07Cylinder 2 injector delivery failureFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000653.05Cylinder 3 injector circuit openCheck the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer.
000653.06Cylinder 3 injector circuit shortedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000653.07Cylinder 3 injector delivery failureFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000654.05Cylinder 4 injector circuit openCheck the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer.
000654.06Cylinder 4 injector circuit shortedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000654.07Cylinder 4 injector delivery failureFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000655.05Cylinder 5 injector circuit openCheck the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer.
000655.06Cylinder 5 injector circuit shortedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000655.07Cylinder 5 injector delivery failureFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000656.05Cylinder 6 injector circuit openCheck the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer.
000656.06Cylinder 6 injector circuit shortedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000656.07Cylinder 6 injector delivery failureFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.

Fault codes: PowerTech engines with Stanadyne DE10 pump: pump-specific SPN/FMI codes

Engine controller (ECU) and rotary fuel injection pump

CodeMeaningWhat to do
001076.00Pump control valve closing too slowlyFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001076.01Pump control valve closing too quicklyFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001076.03Pump solenoid current too highFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001076.05Pump solenoid circuit openFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001076.06Pump solenoid circuit severely shortedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001076.07Pump control valve closure not detectedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001076.10Pump solenoid circuit moderately shortedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001076.13Pump current decay time invalidFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000636.02Engine position sensor noise detectedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000636.08Engine position sensor signal missingFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000636.10Engine position sensor pattern errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000637.01Timing (crank) sensor signal pattern errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000637.02Crank position input noiseFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000637.10Crank position input pattern errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000627.04ECU unswitched (permanent) power missingCheck the engine controller fuse and battery feed; dealer if it stays.
001079.03Sensor supply voltage too highFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001079.04Sensor supply voltage too lowFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000084.31Vehicle speed mismatchNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
000091.07Throttle calibration invalidThe dealer will need to recalibrate the throttle.
000091.10Throttle voltage lowFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000091.14Throttle voltage out of rangeFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000190.01Engine speed below normal, most severeFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.

Fault codes: PowerTech engines with Bosch VP44 pump: pump-specific SPN/FMI codes

Engine controller (ECU) and electronic VP44 injection pump

CodeMeaningWhat to do
000094.01Fuel supply pressure extremely lowCheck the fuel level, the fuel filters (change if overdue) and for air leaks in the supply line. Dealer if it stays.
000094.18Fuel supply pressure moderately lowCheck the fuel level and filters and for air leaks in the supply line.
000094.03Fuel supply pressure sensor voltage too highCheck the sensor plug is fully home and the wiring is undamaged; dealer if it stays.
000094.04Fuel supply pressure sensor voltage too lowCheck the sensor plug is fully home and the wiring is undamaged; dealer if it stays.
000084.02Vehicle speed mismatchNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
000629.19ECU to pump communication errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000632.02Fuel shut-off errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000632.05Fuel shut-off non-functionalFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000636.02Pump position input noiseFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000636.08Pump position input missingFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000636.10Pump position input pattern errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000637.02Crank position input noiseFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000637.08Crank position input missingFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000637.10Crank position input pattern errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000810.02Calculated vehicle speed input noiseNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
000898.09Vehicle speed invalid or missingNote the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer.
001069.02Tyre size error (wrong size set for the speed calculation)The dealer can set the correct tyre size.
001076.02Pump has detected a defectFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001077.07Pump is trying to fuel without being commandedFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001077.11Pump supply voltage out of rangeCheck the battery and charging; dealer if it stays.
001077.12Pump self-test errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001077.19Pump detected a communication errorFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001077.31Pump has put the engine into protectionFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001078.07ECU and pump timing moderately out of syncFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001078.11ECU and pump speed out of syncFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001078.31ECU and pump timing extremely out of syncFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001079.03Sensor supply 1 voltage too highFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001079.04Sensor supply 1 voltage too lowFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001080.03Sensor supply 2 voltage too highFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001080.04Sensor supply 2 voltage too lowFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
001485.02Pump power relay faultFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.
000627.04ECU unswitched power missingCheck the engine controller fuse and battery feed; dealer if it stays.
000174.31Fuel temperature sensor faultyFinish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back.

Repair guides

The full step-by-step guides are in Farmyard Workshop once you add your tractor.

Parts list with genuine part numbers

John Deere Maintenance Parts Catalog PC4962 (6000/6010/6020 series, ed. 31-Aug-2010)

Filters

PartPart numberQtyNotes
Fuel pumpAL784051Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter elementAL788691Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter elementAL788701Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Oil filterT190441Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter elementRE624191A=109 mm (4.3")( substitutes for RE62418,RE64450 application ). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Oil filterAL1566251length 158 mm ,FRONT( substitutes for AL77061). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Oil filterAL2030601(E) length 205 mm ( substitutes for AL113475, AL112936). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter housingAL1129221(E) length 240 mm ( substitutes for AL113474). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter elementL1017862(B)(C). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter elementL1017942(B)(C). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Air filterAL1771852(B)(C)(F)( substitutes for AL111748,AL115625, AL119096). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Air filterAL1771842( substitutes for AL119095). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Hydraulic filterAL1180361(A)REAR, length 240 mm ( substitutes for RE34958 application ). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Oil filterRE597541Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Oil filterAL1566241length 120 mm ,FRONT( substitutes for RE55801). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter elementAL1183211AUTOPOWR/JD-IVT( substitutes for AL151235). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Oil filterAL2035201(G) length 240 mm ( substitutes for AL112922). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter housingL1155791(A). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter elementAL712591Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Activated carbon air filterAL1589851KIT( substitutes for AL158991). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Activated carbon air filterL1562351LH. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Activated carbon air filterL1562361RH. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Fuel filterRE5171811( order RE509208). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter elementRE5092081(ALSO order ERR113565). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Fuel filterAL1535171(H). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Air filterAL1502881Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Air filterAL1727811Serial -391078. length 284 mm (11-3/16") only 6520,6620(SUB FORAL150285). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Air filterAL1727801Serial 391079-. length 183 mm (7-7/32") only 6520,6620(SUB FORAL119839). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Fuel filterRE5090311(B)(E). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Fuel filterRE5090321(B)(G). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
FilterL1552882(C)(D)( substitutes for L116025). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Filter elementL1520262(D). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Fuel filterRE5090361(A)(G)( substitutes for RE517180). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Oil filterAL2030611Serial 376494-. (E)( substitutes for AL160771). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Activated carbon air filterAL1589861KIT. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Activated carbon air filterL1562252Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part

Engine - Drive belt

PartPart numberQtyNotes
BeltL11448811915 mm (75"). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
BeltL1116001(A)2460 mm (96"). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
BeltL1116011(A)2475 mm (97"). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part

Engine - Water pump

PartPart numberQtyNotes
Engine kitRE709621Listed for all 6-cylinder 6000/6010/6020 series; check serial
RingL413831Listed for all 6-cylinder 6000/6010/6020 series; check serial
Snap ringA364R1Listed for all 6-cylinder 6000/6010/6020 series; check serial
Fitting plugRE466851M18X1.5. Listed for all 6-cylinder 6000/6010/6020 series; check serial
GasketR1234171Listed for all 6-cylinder 6000/6010/6020 series; check serial

Engine - Coolant pump with cast - iron housing

PartPart numberQtyNotes
Engine kitRE709621( also order R123417,R123226). Listed for all 6-cylinder 6000/6010/6020 series; check serial
GasketR1234171Listed for all 6-cylinder 6000/6010/6020 series; check serial

Engine - Thermostat

PartPart numberQtyNotes
ThermostatAL1719601Serial 425338-. ( substitutes for AL165569) only 6515,6520,6615, 6620,6715. Listed for all 6-cylinder 6000/6010/6020 series; check serial

Engine

PartPart numberQtyNotes
HoseL1005901Serial -156347. Listed for all 6-cylinder 6000/6010/6020 series; check serial
ShroudAL795091Listed for all 6-cylinder 6000/6010/6020 series; check serial
Radiator hoseL803311Listed for all 6-cylinder 6000/6010/6020 series; check serial
RadiatorAL1150031Serial 192066-. ( substitutes for AL115733). Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1112751156348-Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1103631156348-Listed for all 6-cylinder 6000/6010/6020 series; check serial
ClampAL37451as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1145951Listed for all 6-cylinder 6000/6010/6020 series; check serial
RadiatorAL1185711Serial 238357-251062. Listed for all 6-cylinder 6000/6010/6020 series; check serial
RadiatorAL1187751Serial 251063-. Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1145931Serial -251062. (A). Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1160931251063-(B). Listed for all 6-cylinder 6000/6010/6020 series; check serial
RadiatorAL1633581Serial -425337. only 6515,6520,6615,6620,6715( substitutes for AL156288,AL157249,AL161424)( order AL168727,AL171960,L165847,L165843, L165802,L167142,(2)AL118044). Listed for all 6-cylinder 6000/6010/6020 series; check serial
ScreenL1540261Serial -425337. Listed for all 6-cylinder 6000/6010/6020 series; check serial
ShroudAL1674331Serial -425337. ( substitutes for AL156289). Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1530121Serial -425337. Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1548441Serial -425337. (A). Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1164231Serial -425337. Listed for all 6-cylinder 6000/6010/6020 series; check serial
ClampAL170672as requiredSerial -425337. ( substitutes for AL112931). Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1164471Serial -425337. Listed for all 6-cylinder 6000/6010/6020 series; check serial
ClampAL64588as requiredSerial -425337. Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1569691Serial -425337. ( substitutes for L154920). Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1565501Serial -425337. (B)( substitutes for L153079) only 6520,6620, 6820,6920,6920S. Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1530771Serial -425337. (B) only 6520,6620,6820,6920,6920S. Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1539221Serial -425337. (B) only 6520,6620,6820,6920,6920S. Listed for all 6-cylinder 6000/6010/6020 series; check serial
ClampL1588282Serial -425337. (B) only 6520,6620,6820,6920,6920S. Listed for all 6-cylinder 6000/6010/6020 series; check serial
RadiatorAL1687271Serial 425338-467487. Listed for all 6-cylinder 6000/6010/6020 series; check serial
RadiatorAL1763621Serial 467488-. ( substitutes for AL171543). Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1547961425338-(D). Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1658021425338-Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1671421425338-Listed for all 6-cylinder 6000/6010/6020 series; check serial
HoseL1658451425338-(E). Listed for all 6-cylinder 6000/6010/6020 series; check serial
ClampTY224622425338-(E)( substitutes for AR48236). Listed for all 6-cylinder 6000/6010/6020 series; check serial

Electrical - Starting motor

PartPart numberQtyNotes
Starter motorAL708521Serial -551900. 3.0KW( substitutes for AL81154). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Starter motorRE5048071551901-3.0KW. Listed for all 6-cylinder 6000/6010/6020 series; check serial

Electrical - Fuses and diodes

PartPart numberQtyNotes
Diode holderAL1520981Listed for all 6-cylinder 6000/6010/6020 series; check serial

Electrical - Alternator

PartPart numberQtyNotes
AlternatorAL114092114V/90A( order AL166645,L112969,L78085). Listed for all 6-cylinder 6000/6010/6020 series; check serial
AlternatorAL114093114V/115A( order AL166646,L112969,L78085). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Pulley with damperL1129691Listed for all 6-cylinder 6000/6010/6020 series; check serial
Flange nutL780851Listed for all 6-cylinder 6000/6010/6020 series; check serial
Washer4M70551Listed for all 6-cylinder 6000/6010/6020 series; check serial
Washer4M70271Listed for all 6-cylinder 6000/6010/6020 series; check serial
RegulatorAL1554041Listed for all 6-cylinder 6000/6010/6020 series; check serial
AlternatorAL166645114V/90A. Listed for all 6-cylinder 6000/6010/6020 series; check serial
AlternatorAL166646114V/115A. Listed for all 6-cylinder 6000/6010/6020 series; check serial

Electrical

PartPart numberQtyNotes
AlternatorAL111675114V/90A( order AL166645). Listed for all 6-cylinder 6000/6010/6020 series; check serial
AlternatorAL111676114V/115A( order AL166646). Listed for all 6-cylinder 6000/6010/6020 series; check serial
AlternatorAL119537114V/150A( order AL171541)(INCLAL166647, L157496). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Centre sheaveAL1575951(A)MARKEDAL156091(FORAL111675,OR AL111676)( order AL166836). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Centre sheaveAL1575941(A)MARKEDAL156092(FORAL119537)( order AL166835. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Washer4M70551Listed for all 6-cylinder 6000/6010/6020 series; check serial
Washer4M70271Listed for all 6-cylinder 6000/6010/6020 series; check serial
RegulatorAL1554041Listed for all 6-cylinder 6000/6010/6020 series; check serial
Centre sheaveAL166836190A/115A(FORAL166645ORAL166646) ( substitutes for AL161112). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Centre sheaveAL1668351150A(FORAL166647). Listed for all 6-cylinder 6000/6010/6020 series; check serial
PlugL1574961Listed for all 6-cylinder 6000/6010/6020 series; check serial
RegulatorAL1725321Listed for all 6-cylinder 6000/6010/6020 series; check serial
AlternatorAL166645114V/90A. Listed for all 6-cylinder 6000/6010/6020 series; check serial
AlternatorAL166646114V/120A. Listed for all 6-cylinder 6000/6010/6020 series; check serial
AlternatorAL166647114V/150A( order AL171541). Listed for all 6-cylinder 6000/6010/6020 series; check serial
BulbR133301as required12V,21W. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
BulbAL33162as required12V,2W. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
LampAL33163as required12V,5W. Listed for all 6-cylinder 6000/6010/6020 series; check serial
BulbAL65575as required12V,1.2W. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Bulb57M7166as required12V,55/60W. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Bulb57M6844as required12V,40/45W. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
BulbR136239as required12V,55W. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Bulb57M6498as required12V,5W. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Bulb57M6394as required12V,4W. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Bulb57M7019as required12V,55W. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Bulb57M7105as required(B). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Lamp57M7615as required(B). Listed for all 6-cylinder 6000/6010/6020 series; check serial
BulbL150689as required(A). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
LampAL117814as required12V,3W. Listed for all 6-cylinder 6000/6010/6020 series; check serial
LampAL117815as required12V,1.1W. Listed for all 6-cylinder 6000/6010/6020 series; check serial

Hydraulics

PartPart numberQtyNotes
Hydraulic pumpAL827771Serial -295450. ( order AL161041,AL154045,38H5013, 51M7048). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Piston replacement kitRE511701Serial -295450. ( order AL161041,RE203743). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Seal kitRE511711Serial -295450. ( order AL161041,RE203743). Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
ControlRE466491Serial -295450. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic pumpAL827781Serial -287407. ( order AL161043,AL154045). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Piston replacement kitRE438351Serial -287407. ( order AL161043,RE203720). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Seal kitRE438361Serial -287407. Listed for all 6-cylinder 6000/6010/6020 series; check serial. Wear/service part
Hydraulic pumpAL1610411295451-25CM3( substitutes for AL151514,AL157201). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic pump (reman)PG2008641(A)25CM3. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic pumpAL1610431287408-41CM3( substitutes for AL151513,AL157203). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic pump (reman)PG2008651(A)41CM3. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Gasket kitAL1584221( substitutes for AL153884). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic pumpAL156333123CM3( order AL163918,L34995,L115460,(4) 19M7660)( substitutes for AL110829,AL151025). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic pumpAL117812127CM3( order AL156335,L34995,L115460,(4) 19M7660). Listed for all 6-cylinder 6000/6010/6020 series; check serial
GasketL773171Listed for all 6-cylinder 6000/6010/6020 series; check serial
GasketL1107451Listed for all 6-cylinder 6000/6010/6020 series; check serial
Adapter fittingAL1143921Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic pumpAL163918123CM3( also order L34995,L115460,(4) 19M7660). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic pumpAL156335128CM3( also order L34995,L115460,(4) 19M7660). Listed for all 6-cylinder 6000/6010/6020 series; check serial
O-ringL349951Listed for all 6-cylinder 6000/6010/6020 series; check serial
Adapter fittingL1154601Listed for all 6-cylinder 6000/6010/6020 series; check serial
Screw19M76604M8X20. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Adapter fittingL1107431Listed for all 6-cylinder 6000/6010/6020 series; check serial
O-ringL538401Listed for all 6-cylinder 6000/6010/6020 series; check serial
Screw19M76034M6X20. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic quick coupler socketAL1573772Serial -401133. (A)( order AL202351,AL202352,AL163909)(SUB FORAL119349)
O-ring1M70451
Seal kitAL1571992Serial -401133. Wear/service part
O-ring51M70772
Seal kitAL1638691401134-Wear/service part
Hydraulic quick coupler socketAL1661831401134-MARKEDAL166183, length 120 mm ( order AL202351, AL202352)( substitutes for AL161531)
Hydraulic quick coupler socketAL2023521MARKEDAL202352( substitutes for AL178990, AL169646)
Hydraulic quick coupler socketAL1661821401134-MARKEDAL166182, length 120 mm ( order AL202351, AL202352)( substitutes for AL161530)
Hydraulic quick coupler socketAL2023511MARKEDAL202351, length 98 mm ( substitutes for AL178989,AL169645)
CapL113470as required( substitutes for L79587). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Adapter fittingL79589as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial
CapL154628as required( substitutes for L79588). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hose fittingL61369as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial
WasherL101608as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial
O-ringT778142Listed for all 6-cylinder 6000/6010/6020 series; check serial
Elbow fittingL783401Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hose fittingL398301Listed for all 6-cylinder 6000/6010/6020 series; check serial
PlugL1021561MARKEDIII( substitutes for R96134). Listed for all 6-cylinder 6000/6010/6020 series; check serial
PlugL1021571MARKEDIV( substitutes for R96135). Listed for all 6-cylinder 6000/6010/6020 series; check serial
PlugL78338as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial
CaseL78337as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial
CapL79081as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial
Tee fittingL783391Listed for all 6-cylinder 6000/6010/6020 series; check serial
SignL792941Listed for all 6-cylinder 6000/6010/6020 series; check serial
SignL792931Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic reservoirL1009371Listed for all 6-cylinder 6000/6010/6020 series; check serial
CoverL1014041Listed for all 6-cylinder 6000/6010/6020 series; check serial
RetainerL1014461(B). Listed for all 6-cylinder 6000/6010/6020 series; check serial
HolderAL816551(C). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Cap screw19M79232M6X12. Listed for all 6-cylinder 6000/6010/6020 series; check serial
SignL792911Listed for all 6-cylinder 6000/6010/6020 series; check serial
SignL792921Listed for all 6-cylinder 6000/6010/6020 series; check serial
PlugL1021541MARKEDI( substitutes for R96132). Listed for all 6-cylinder 6000/6010/6020 series; check serial
PlugL1021551MARKEDII( substitutes for R96133). Listed for all 6-cylinder 6000/6010/6020 series; check serial
CaseL1148261Listed for all 6-cylinder 6000/6010/6020 series; check serial
SleeveL116326as required(A)( substitutes for L113696)( also order 51M7077). Listed for all 6-cylinder 6000/6010/6020 series; check serial
SpringL1021582Listed for all 6-cylinder 6000/6010/6020 series; check serial
CoverL1021521NSEP( order AL120010). Listed for all 6-cylinder 6000/6010/6020 series; check serial
CoverL1021501NSEP( order AL120010). Listed for all 6-cylinder 6000/6010/6020 series; check serial
GrommetL1658522( substitutes for L114833,L116307). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Tee fittingL78133as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial
Adapter fittingL781651Listed for all 6-cylinder 6000/6010/6020 series; check serial

Hydraulics - Quick disconnect couplers

PartPart numberQtyNotes
Hydraulic quick coupler socketAL150763as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial
Dust shieldL171561as required( substitutes for L62751). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic quick coupler socketAL112951as requiredlength 95 mm ( order AL166181,40M7162). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Hydraulic quick coupler socketAL166181as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial
O-ring51M7045as requiredListed for all 6-cylinder 6000/6010/6020 series; check serial

Front axle

PartPart numberQtyNotes
Tie rod assemblyAL687231
SealL393054Wear/service part
ShimL403014
Pin fastenerL360862
Snap ring40M71952
Link endAL371931
ClampL642511
Cap screw19M86161M10X50
Lock nut14M7324as requiredM10
TubeL642501
Cap screw19M79182M10X60
ClampL393292
Tie rod endAL687241
Tie rod assemblyAL371461
ClampL393281
Tie rod assemblyL393241
Tie rod endAL372041
Tie rod assemblyL393251
HousingL1104731(B) LH
HousingL1147881(A)(B) LH
HousingL1104741(B) RH
HousingL1147891(A)(B) RH
SealAL1540552(C). Wear/service part
Tapered roller bearingAL818444
O-ringL403172
Snap ringT1164002
Wheel boltL11211216
BearingAL817762
Snap ring40M18732
SealAL818432Wear/service part
BearingAL799014
SealAL799024Wear/service part
ShimL100102as requiredTK=0,2 mm
ShimL100103as requiredTK=0,3 mm
ShimL100104as requiredTK=0,4 mm
ShimL100105as requiredTK=0,6 mm
ShimL100106as requiredTK=0,8 mm
ShimL100107as requiredTK=1,0 mm
ShimL100109as requiredTK=1,6 mm
ShimL100111as requiredTK=2,0 mm
TrunnionL1121104
Cap screw19M801116M12X30(10.9)
Wing nut14M7345as requiredM14
ScrewL100239as requiredM14X1.5(10.9)
HousingL1532621(C) LH ,MARKED4475306300
HousingL1532611(C) RH ,MARKED4475306299
HousingL1573681(A) LH (FORAL171555,AL171556,AL171561)
HousingL1573661(A) RH (FORAL171555,AL171556,AL171561)
HousingL1573691Serial -358615. (B) LH ( order L158603,AL160097,L156847, 14M7289,51M7080,51M7081,51M7041)
HousingL1586031358616-(B) LH
HousingL1573671Serial -358615. (B) RH ( order L158602,AL160097,L156847, 14M7289,51M7080,51M7081,51M7041)
HousingL1586021358616-(B) RH
HousingL1714481(A) LH (FORAL175358,AL173216,AL173218)
HousingL1714491(A) RH (FORAL175358,AL173216,AL173218)
PinAL1724883(D)(FORAL171556)
PinAL1724874(FORAL173216,AL173218)
PinAL1665241(B)(D)(FORAL171556)
PinAL1663641(D)(FORAL175358)
SealAL1613154(FORAL175358,AL173216,AL173218). Wear/service part
BearingAL1612894(FORAL175358,AL173216,AL173218)
Set screwL1568604
Cap screw19M633216M14X35(10.9)
Shim kitAL160138as required
Snap ring0M18722
ScrewL1575872( substitutes for L156862,L157633)
Wheel boltL11393120
O-ringL1139502
WasherL1139482
Snap ringL1568592
DiscL1657981(D)
ShaftL1657971(D)
Adapter fittingL1657961(D)
O-ringL1667581(D)
PotentiometerAL1502061(D)
PlateL1586251(D)
BoltL1663012(D)
BushL157550as required(C)

Front axle - Tie rod , m fwd - axle , with or without tls

PartPart numberQtyNotes
Tie rod assemblyAL1165581LH ( order AL168708,AL168711). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Tie rod assemblyAL1165591RH ( order AL168709,AL168711). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Ball jointAL1167401LH ( order AL168708). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Ball jointAL1167411RH ( order AL168709). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Tie rod assemblyAL805421( order AL168711). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Lock nut14M75131M22. Listed for all 6-cylinder 6000/6010/6020 series; check serial
NutL556051M24. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Ball jointAL1687081LH. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Ball jointAL1687091RH. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Tie rod endAL1687111Listed for all 6-cylinder 6000/6010/6020 series; check serial

Front axle - Tie rod , m fwd - axle

PartPart numberQtyNotes
Tie rod assemblyAL1165581LH ( order AL168708,AL168711) not for 6200, 6200L,6320L-6520L
Tie rod assemblyAL1165591RH ( order AL168709,AL168711) not for 6200, 6200L,6320L-6520L
Ball jointAL1167401LH ( order AL168708) not for 6200,6200L, 6320L-6520L
Ball jointAL1167411RH ( order AL168709) not for 6200,6200L, 6320L-6520L
Tie rod assemblyAL805421( order AL168711) not for 6200,6200L, 6320L-6520L
Lock nut14M75131M22, not for 6200,6200L,6320L-6520L
NutL556051not for 6200,6200L,6320L-6520L
Ball jointAL1687081LH , not for 6200,6200L,6320L-6520L
Ball jointAL1687091RH , not for 6200,6200L,6320L-6520L
Tie rod endAL1687111not for 6200,6200L,6320L-6520L

Operator's station - Gas operated cylinder

PartPart numberQtyNotes
Gas operated cylinderAL1743561(A)( substitutes for AL78987). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Ball joint retainerL1124242Listed for all 6-cylinder 6000/6010/6020 series; check serial
Ball studR2374741( substitutes for R97588). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Ball joint retainer56M70071Listed for all 6-cylinder 6000/6010/6020 series; check serial
Gas operated cylinderAL1743571(C)( substitutes for AL81578,AL114803). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Ball studR975881Listed for all 6-cylinder 6000/6010/6020 series; check serial
Gas operated cylinderAL1606991(D)( substitutes for AL82634). Listed for all 6-cylinder 6000/6010/6020 series; check serial
Ball stud55M70071Listed for all 6-cylinder 6000/6010/6020 series; check serial
Ball studL789791Listed for all 6-cylinder 6000/6010/6020 series; check serial

Operator's station

PartPart numberQtyNotes
WindscreenL787261(A). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindscreenL787331(B). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindscreenL1713361223898-(B)(D)( substitutes for L112972). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL785341(C) RH. Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL785331(C) LH. Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL1713321223898-(D) RH ( substitutes for L114754). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL1713311223898-(D) LH ( substitutes for L114753). Listed for all 6-cylinder 6000/6010/6020 series; check serial
DoorL1691021LH ( substitutes for L77647). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL1706771(E)( substitutes for L78989). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL785381(A)(B)(C) RH. Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL785371(A)(B)(C) LH. Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL1719751(A)(D) RH ( also order L171980,03M7342)(SUB FORL113305,L170546). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL1719761(A)(D) LH ( also order L171980,03M7342)(SUB FORL113306,L170547). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL787271Serial -118041. (C)(A)( substitutes for L156325,L171335)( order W/(2)AL81578). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL787281Serial -118041. (C)(B)( substitutes for L156325,L171335). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL752762(C). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindscreenL1668751( substitutes for L155222,L157582). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindscreenAL1676561(A)( substitutes for AL157563,AL164203). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindscreenL1517511Serial -337621. (C)(D)( order L171338,AL157993). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL1713381337622-(C)(D)( substitutes for L155784). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindscreenAL1566511Serial -337621. (A)(C)(D)( order AL158149,AL157993). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindscreenAL1581491Serial 337622-. (A)(C)(D). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindscreenAL1566521(A)(C)(E). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL1576291(H) only SE-MODELS( substitutes for L156898). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL1713341RH ( substitutes for L151753). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL1713331LH ( substitutes for L151752). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneL1713351( substitutes for L156325). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneAL1745531(A)( substitutes for AL156653). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneAL1523371(F). Listed for all 6-cylinder 6000/6010/6020 series; check serial
WindowpaneAL1566541(A)(F). Listed for all 6-cylinder 6000/6010/6020 series; check serial
BracketAL774831(A) LH. Listed for all 6-cylinder 6000/6010/6020 series; check serial
BracketAL774841(A) RH. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Structural tubingL781741Listed for all 6-cylinder 6000/6010/6020 series; check serial
KnobL781761Listed for all 6-cylinder 6000/6010/6020 series; check serial
RodL781731Listed for all 6-cylinder 6000/6010/6020 series; check serial
Adapter fittingL797842Listed for all 6-cylinder 6000/6010/6020 series; check serial
Washer24M7430164X90X3 mm. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Rear view mirrorAL780212Listed for all 6-cylinder 6000/6010/6020 series; check serial
Rear view mirror glassL797761Listed for all 6-cylinder 6000/6010/6020 series; check serial
SocketL797771Listed for all 6-cylinder 6000/6010/6020 series; check serial
HolderL797781Listed for all 6-cylinder 6000/6010/6020 series; check serial
Screw21M74234M6X30. Listed for all 6-cylinder 6000/6010/6020 series; check serial
Washer24M73624Listed for all 6-cylinder 6000/6010/6020 series; check serial
ScrewL1531304M8X30. Listed for all 6-cylinder 6000/6010/6020 series; check serial
CapL387971Listed for all 6-cylinder 6000/6010/6020 series; check serial
HolderAL774851LH. Listed for all 6-cylinder 6000/6010/6020 series; check serial
RetainerAL774861RH. Listed for all 6-cylinder 6000/6010/6020 series; check serial
CapL797752Listed for all 6-cylinder 6000/6010/6020 series; check serial
SeatAL1543521(B)(C)(D)MSG95D42C-R
ScrewL1524054M8X25(10.9)
Seat beltAL1173661Wear/service part
Seat beltAL1553611Wear/service part
Washer24H13232
Lock nutR1687232
Seat beltAL1553631(A). Wear/service part
Washer12M16461(A)
Cap screw19H31501(A)
AdjusterAL1172491
PlugL388924
GripL1149111
Extension springL1149121
AbsorberAL1172511
Push pull cableAL1172551
ArmrestAL681001
ScrewL62483as required
ScrewL624854
Extension springL1149214
AbsorberAL1172651
Snap ring40M70821
Pin fastenerL635621
Seat suspensionAL1172691
RollerL388554
Lock nut14M71662M8
BearingL420414
Pin fastenerL1149221
BumperL256782
AdjusterAL1172711
Snap ring0M70301
Seat suspensionAL1173491( substitutes for AL70634)
SpindleAL706311
AdjusterAL706331
RetainerAL1146921( substitutes for AL70627)
AbsorberAL706291
BumperAL706361( order AL117342)
Seat suspensionAL1147031
ActuatorAL1173421( substitutes for AL111317)
AdjusterAL1173481
RetainerAL1173451
AbsorberAL1173461
StrapL616121
RivetL390112
PlateL388901
BarL388621
NutL388611
ForkAL385261
Extension springT822272
RetainerAL366431
Needle bearingAL640342
Pin fastenerAL414711
PlateL388531
Seat suspensionAL1173401
Seat suspensionAL1173431
Washer4M72931
Extension springL615991
ScrewL616151
ClampL616071
SpringL616101
BushL616012
Push nutL616272
LeverL616081
Seat suspensionAL1174711(A)
Seat suspensionAL1174571( substitutes for AL70606)
AbsorberAL706021
ArrestorAL1174511
ActuatorAL1174561
Push pull cableAL1174551
Push pull cableAL706111
Wiring harnessAL1174641
Wiring harnessAL1174741(B)
BootAL1174731(A)
ReservoirAL1664541( substitutes for AL156145)
Compressed air hoseAL1664601( substitutes for L116667)
Seat suspensionAL1561261( substitutes for AL117461)
Seat suspensionAL1147011
CompressorAL1664501( substitutes for AL70620)
Push pull cableAL706151(FORAL70617)
AbsorberAL706171( order AL81880)MARKEDBOGE
Push pull cableAL1148041(FORAL81880)
AbsorberAL818801MARKEDSUSPA
Seat suspensionAL1761971( substitutes for AL77915)
ShieldAL706011
LeverAL705861
PlateAL705871
SpindleAL705971
Spring assemblyAL705981( order AL70597)
Seat backAL705931(A)( substitutes for AL70906)
EscutcheonAL705891LH
CushionAL705951
Seat backAL709071128361-
CushionAL705941(A)
Seat backAL705961Serial -128360. ( order AL70907)
ArmrestAL665131
Screw19M7902as requiredM8X16
Washer24M7055as required
Set screw22M7098as required
PlugL397512
BushL646752
ArmrestAL665141
AdjusterAL1172791
Lock nut4M7166as requiredM8
LeverL1149261
Extension springL1149271
EscutcheonAL1172781
ShieldL1149631
WasherL795001
Lock nutL582176
Mounting partsAL1173361
Washer4M70554
Extension springL647131
GripL1149721
BracketL1138891
BracketL1138881
Cap screw19H224727/16
LabelR1681022(A)
LabelR1687012(B)
LabelR1687022(C)
Cap screw9M75601M6X16
Washer24M72513
Lock nut14M71651M6
Lock nut14M73761M6
ClampL794301
SpacerL1110384
Washer24M71784
Lock nut14M71674M10
HoodL1134381
Seat beltAL1177341Wear/service part

Operator's station - Window wipers

PartPart numberQtyNotes
Wiper bladeAL1536601(A) length 500 mm ( substitutes for RE24201,AL153661 application ). Wear/service part
Wiper bladeAL1536611length 600 mm ( substitutes for RE24201). Wear/service part
Wiper bladeAL1139071(B)FRONT. Wear/service part
Wiper bladeAL1139061(B)REAR. Wear/service part

Operator's station - Seats

PartPart numberQtyNotes
SeatAL1641591(A)MSG85( order AL179257)
SeatAL1146181(E)MSG93-E12C( order AL154352)
SeatAL1641581(E)MSG83-B12O-SB( order AL179255)( substitutes for AL114832)

Operator's station - Seat belt for super comfort seat msg 83

PartPart numberQtyNotes
Seat beltAL1172831Wear/service part

Sources

Open Farmyard Workshop

More from John Deere.