John Deere 6630 Premium service schedule
John Deere 6030 series · 2006–2011 (6530: 2006–2008; 6630 and 6930: 2006–2011, TractorData)
Covers the John Deere 6630 Premium (also 6530 and 6930).
Every maker's service job for the John Deere 6630 Premium, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.
Track your 6630 Premium for freeVersions: PowrQuad Plus / AutoQuad Plus; AutoPowr IVT
Service intervals
| Job | When |
|---|---|
| Engine oil and filter change | every 500 hours or every year |
| Cab activated carbon filters (where fitted) | every 500 hours or every year |
| Fuel filters (primary and final) | every 500 hours |
| Transmission and hydraulic oil filters | every 750 hours |
| Front PTO oil filter (where fitted) | every 750 hours |
| Engine air filter elements | every 1,500 hours or every 2 years |
| Cab fresh air and recirculation filters | every 1,500 hours or every 2 years |
| Front PTO oil change (where fitted) | every 1,500 hours |
| Coolant replacement | every 1,500 hours |
| Transmission and hydraulic oil change | when needed |
| Front axle oil change (four-wheel drive) | when needed |
| Valve clearance check and adjustment (dealer job) | when needed |
Service jobs and parts
Engine oil and filter change
Engine · every 500 hours or every year
Deere's 6030 Premium filter sheet gives oil and filter after the first 100 hours, then every 500 hours or once a year. The 500-hour interval only applies with Plus-50 II oil, a genuine filter and diesel under 15 ppm sulphur; otherwise change every 250 hours. TractorData also gives 500 hours for the 6630 Premium engine.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Engine oil | 1 | 15W-40 (10W-30, 5W-40 or 0W-40 colder). Plus-50 II, ≈19.5 L with filter. Aztec Oils match: EMPROTEC EHPD 15W-40 | check your handbook |
| Engine oil filter | 1 | Same number on Deere's 6030 and 7030 Premium sheets; Agriline and Vapormatic list it for the 6530 to 6930 | RE504836 |
Step-by-step
- Warm the engine, then park on level ground, lower the linkage, loader and implements fully, stop the engine, take the key out and chock the wheels.
- Let it stand a few minutes. Hot oil burns, so wear gloves.
- Remove the sump plug and let the oil drain fully.
- Remove the oil filter, check the old seal came off, and wipe the filter head clean.
- Oil the new filter seal and fit it hand-tight as marked on the filter.
- Refit the drain plug and fill with Plus-50 oil to the full mark.
- Run the engine for a minute, check for leaks, stop it and recheck the level.
Tools: Drain tray (25 L), Filter wrench, Spanner for sump plug, Funnel, Rags, Gloves
Cab activated carbon filters (where fitted)
Cab · every 500 hours or every year
Carbon filters protect the driver when spraying. Deere's 6030 Premium sheet says never clean them; replace every 500 hours or 1 year, or with the engine primary air filter, whichever comes first.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Activated carbon filter | 2 | Kit AL158986 also listed; confirm for your serial number | L209778 |
Step-by-step
- Stop the engine and take the key out.
- Open the cab filter covers and remove the carbon filters. Wear gloves and a mask; they may hold spray residue.
- Bag the old filters and dispose of them as chemical waste.
- Fit the new filters and check the covers seal.
Tools: Screwdriver, Dust mask, Gloves
Fuel filters (primary and final)
Fuel · every 500 hours
Deere's sister-model sheets say replace both fuel filters every 500 hours. The numbers vary by engine serial number. Agriline also lists a 30-micron RE529643 as an alternative primary filter, so confirm against your engine plate.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Primary fuel filter | 1 | From the 6.8 L 7030 Premium sheet (as used on the existing 6830 entry); Agriline lists RE541922 / RE529643. Confirm for your engine serial number | RE541922 |
| Final (secondary) fuel filter | 1 | 2 micron; listed by UK dealers for the 6530 to 6930. Confirm for your engine serial number | RE522878 |
Step-by-step
- Stop the engine, take the key out and chock the wheels. Keep naked flames away.
- Clean around both filters so dirt cannot get in.
- Drain any water from the primary filter into a container.
- Remove the old filters and fit the new ones with clean seals.
- Prime the system with the hand primer as your handbook describes. Never slacken high-pressure pipes on a common-rail engine.
- Start the engine and check for leaks.
Tools: Container for fuel, Filter wrench, Rags, Gloves
Transmission and hydraulic oil filters
Transmission · every 750 hours
Deere's 6030 Premium sheet says change the hydraulic and transmission filters together after the first 100 hours, then every 750 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Hydraulic oil filter | 1 | Deere 6030 Premium sheet; confirm for your serial number | AL169573 |
| Transmission oil filter (PowrQuad Plus / AutoQuad Plus) | 1 | Confirm for your serial number | AL221066 |
| Transmission oil filter (IVT) | 1 | IVT only, instead of AL221066; confirm for your serial number | AL206482 |
| Hy-Gard for topping up | 1 | UTTO tractor transmission oil. Aztec Oils match: AGRITEC UTTO | check your handbook |
Step-by-step
- Park on level ground, lower the linkage, loader and implements fully, stop the engine, take the key out and chock the wheels.
- With the engine off, work the SCV and linkage controls to relieve hydraulic pressure before opening anything.
- Let hot oil cool before starting; it burns.
- Clean around each filter, then remove both filters and catch the oil.
- Fit new filters with oiled seals, hand-tight.
- Start the engine, run it briefly, stop it and top up Hy-Gard to the correct level. Check both filters for leaks.
Tools: Drain tray, Filter wrench, Rags, Gloves
Front PTO oil filter (where fitted)
PTO · every 750 hours
Deere's filter sheets for this family give a separate front PTO oil filter, replaced every 750 hours. The PTO oil itself is changed with the 1,500-hour jobs.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Front PTO oil filter | 1 | From Deere's filter sheets for the 6010, 6020 and 6030 families; confirm for your serial number | L114404 |
Step-by-step
- Lower the front linkage and anything on it to the ground, stop the engine, take the key out and chock the wheels.
- Clean around the filter, remove it and catch the oil.
- Fit the new filter with an oiled seal, hand-tight.
- Run the front PTO briefly, stop, check for leaks and top up with Hy-Gard.
Tools: Drain tray, Filter wrench, Rags
Engine air filter elements
Engine · every 1,500 hours or every 2 years
Deere says the primary element may be cleaned up to 5 times and is replaced after 1,500 hours or 2 years. The secondary (safety) element is never cleaned and is replaced every fifth primary change or at 1,500 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Primary (outer) air filter, long type | 1 | 283–284 mm long; Agriline also lists AL150285 for the 6630 up to serial 634559 | AL172781 |
| Secondary (safety) air filter | 1 | AL150288 |
Step-by-step
- Stop the engine and take the key out. Never run the engine with the filter out.
- Open the housing and take out the primary element.
- Only remove the safety element when it is due; never clean it.
- Wipe the housing out with a damp cloth. Do not blow dirt down the intake.
- Fit the new element(s), check they seat evenly and close the housing.
Tools: Torch, Damp cloth
Cab fresh air and recirculation filters
Cab · every 1,500 hours or every 2 years
Clean as required; replace every 1,500 hours or 2 years, or with the engine primary air filter, whichever comes first.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Cab fresh air filter, standard | 2 | Heavy-duty alternative AL225554; confirm for your serial number | AL225552 |
| Cab recirculation filter (with air con) | 2 | Without air con: L152026; confirm for your serial number | L214634 |
Step-by-step
- Stop the engine and take the key out.
- Open the filter covers and remove the elements.
- Wear a dust mask. Tap the filters out gently if cleaning, or fit new ones if due.
- Refit the covers and check they seal.
Tools: Screwdriver, Dust mask
Front PTO oil change (where fitted)
PTO · every 1,500 hours
Deere's sheet gives the front PTO oil quantity but no oil change interval for the 6030 Premium, so check your handbook. Change the filter at the same time.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Hy-Gard oil | 1 | UTTO tractor transmission oil. ≈3.5 L. Aztec Oils match: AGRITEC UTTO | check your handbook |
| Front PTO oil filter | 1 | Change with the oil | L114404 |
Step-by-step
- Lower the front linkage and anything on it to the ground, stop the engine, take the key out and chock the wheels.
- Drain the front PTO housing into a tray and refit the plug.
- Fit a new oil filter with an oiled seal.
- Refill with Hy-Gard to the level your handbook shows, run the PTO briefly and check for leaks.
Tools: Drain tray, Spanners, Filter wrench, Funnel
Coolant replacement
Cooling · every 1,500 hours
TractorData gives a coolant change every 1,500 hours for the 6630 Premium engine. Test the coolant strength every year.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Cool-Gard II coolant | 1 | ≈28 L (TractorData, 6630 Premium) | check your handbook |
Step-by-step
- Only work on a cold engine. Let it cool for at least an hour after work and open the cap slowly to let pressure out.
- Drain the radiator and block into a tray. Dispose of old coolant properly.
- Refit the plugs and fill with Cool-Gard.
- Run the engine to working temperature with the heater on, let it cool and top up.
Tools: Drain tray, Hose, Coolant test strips
Transmission and hydraulic oil change
Transmission · when needed
The sources give the oil quantity but not a change interval for the 6530, 6630 or 6930, so check your handbook. Both filters are always changed with the oil.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Hy-Gard oil | 1 | UTTO tractor transmission oil. ≈53 L PowrQuad Plus / AutoQuad Plus, ≈62 L IVT (TractorData, 6630 Premium). Aztec Oils match: AGRITEC UTTO | check your handbook |
| Hydraulic oil filter | 1 | Change with the oil | AL169573 |
| Transmission oil filter | 1 | AL221066, or AL206482 on IVT; confirm for your serial number | check your handbook |
Step-by-step
- Park on level ground, lower the linkage, loader and implements fully, stop the engine, take the key out and chock the wheels.
- With the engine off, work the SCV and linkage controls to relieve hydraulic pressure before opening anything.
- Let hot oil cool for a while, then drain it from the drain plugs.
- Refit the plugs and fit new hydraulic and transmission filters.
- Fill with Hy-Gard, run the engine, work the hydraulics through their full travel, lower everything and recheck the level.
Tools: Large drain tray (70 L), Spanners, Filter wrench, Pump or funnel, Gloves
Front axle oil change (four-wheel drive)
Driveline · when needed
No front axle oil interval or quantity is in the sources for these models, so check your handbook. The sister 6230 to 6430 Premium sheet gives 6.5 L in the axle housing, but that is a four-cylinder machine.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Front axle oil | 1 | UTTO tractor transmission oil (Hy-Gard). Check your handbook for the quantity. Aztec Oils match: AGRITEC UTTO | check your handbook |
Step-by-step
- Park on level ground, stop the engine, take the key out and chock the wheels.
- Clean around the filler and drain plugs, then drain the axle housing into a tray.
- Refit the plug and refill to the level your handbook shows.
- Check for leaks after a short run.
Tools: Drain tray, Spanners, Funnel
Valve clearance check and adjustment (dealer job)
Engine · when needed
TractorData gives clearances of 0.356 mm inlet and 0.457 mm exhaust, cold, but no interval is in the sources for these models. Check your handbook.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Rocker cover gasket | 1 | Genuine per John Deere shop (shop.deere.com), fits 6630 Tractor (Engine 6068HL280, 6068HL282) (Europe Edition), parts catalogue PC4557, as stated by the page. Check against your engine serial. | R524469 |
Step-by-step
- Have the engine cold.
- Remove the rocker cover and turn the engine to the position your workshop manual gives for each cylinder.
- Measure inlet and exhaust clearances with feeler gauges and adjust any that are out.
- Refit the rocker cover with a sound gasket and run the engine to check for leaks.
Tools: Feeler gauges, Spanners, Socket set, Torque wrench
Oils, fluids and capacities
| System | Oil or spec | Capacity |
|---|---|---|
| Engine | John Deere PowerTech Plus 6068 6.8 L 6-cylinder turbo diesel, 4-valve common rail (Tier III, cooled EGR) | |
| Engine oil | John Deere Plus-50 II, SAE 15W-40 (10W-30, 5W-40 or 0W-40 in colder weather) | ≈19.5 L with filter |
| Coolant | John Deere Cool-Gard II, ≈28 L (TractorData, 6630 Premium) | |
| Valve clearances | Inlet 0.356 mm (0.014 in), exhaust 0.457 mm (0.018 in), cold (TractorData, 6630 Premium engine). Dealer job. | |
| Transmission and hydraulics (shared), PowrQuad Plus / AutoQuad Plus | Hy-Gard | ≈53 L (6530 and 6630 Premium, TractorData) |
| Transmission and hydraulics (shared), IVT | Hy-Gard | ≈62 L (6530 and 6630 Premium; TractorData gives about 56 / 66 L for the 6830, so check your handbook for the 6930) |
| Front axle and final drives (MFWD) | Hy-Gard | Check your handbook |
| Front PTO (where fitted) | Hy-Gard | ≈3.5 L (Deere sheet, 6030 Premium) |
| Fuel tank | Diesel | ≈207 L standard; ≈250 L optional |
Specifications
| Engine power (gross) | 6530: 120 hp (89.5 kW). 6630: 130 hp (96.9 kW). 6930: about 155 hp (TractorData) |
| Transmissions | 24- or 36-speed partial powershift (AutoQuad Plus), or AutoPowr IVT; 20/32-speed on the 6930 |
| Hydraulics | Load-sensing pressure/flow compensated, 200 bar (2,900 psi); 60 L/min standard, 110 L/min optional |
| Weight | 6530 ≈5,080 kg; 6630 ≈5,230 kg |
| Tyre pressures | Check your handbook |
Known problems
Same engine, different power
The 6530, 6630, 6830 and 6930 share the 6.8 L common-rail engine and the same filters. The existing 6830 Premium entry has the same service data.
Transmission oil quantity
TractorData gives about 53 / 62 L for the 6530 and 6630 Premium but 56 / 66 L for the 6830. Fill to the level mark, not to a figure.
EGR and head gaskets
Farmers Weekly names head gaskets and the EGR valve and cooler as the main engine trouble spots on the 30-series six-cylinders.
Fault codes: PowerTech 4.5 L / 6.8 L electronic engines: common SPN/FMI codes
Engine controller (ECU)
| Code | Meaning | What to do |
|---|---|---|
| 000028.03 | Throttle (B) signal voltage too high | Check the throttle pedal or lever plug is fully pushed in and not damaged; dealer if it stays. |
| 000028.04 | Throttle (B) signal voltage too low | Check the throttle plug and wiring; dealer if it stays. |
| 000029.03 | Throttle (A) signal voltage too high | Check the throttle plug and wiring; dealer if it stays. |
| 000029.04 | Throttle (A) signal voltage too low | Check the throttle plug and wiring; dealer if it stays. |
| 000091.03 | Throttle input voltage too high | Check the throttle plug and wiring; dealer if it stays. |
| 000091.04 | Throttle input voltage too low | Check the throttle plug and wiring; dealer if it stays. |
| 000091.09 | Throttle signal invalid | Check the throttle plug and wiring; dealer if it stays. |
| 000097.00 | Water in fuel detected all the time | Drain the fuel water separator now, using the drain tap on the filter housing, until clean fuel runs. Dealer if it keeps returning. |
| 000097.16 | Water in fuel detected | Drain the fuel water separator (drain tap on the filter housing) until clean fuel runs. |
| 000100.01 | Engine oil pressure extremely low | Stop the engine at once. Check the oil level and look for leaks. If the level is correct, do not run it again: call your dealer. |
| 000100.18 | Engine oil pressure moderately low | Stop and check the oil level and for leaks. Top up to the mark with the correct grade if low. If the level is right and the warning stays, do not work the engine: dealer. |
| 000100.03 | Engine oil pressure sensor voltage too high | Sensor or wiring fault. Check the sensor plug; dealer if it stays. Check the oil level now to rule out a real pressure problem. |
| 000100.04 | Engine oil pressure sensor voltage too low | Sensor or wiring fault. Check the sensor plug; dealer if it stays. Check the oil level now to rule out a real pressure problem. |
| 000105.00 | Manifold (intake) air temperature extremely high | Ease off the load, check the cooler and radiator for chaff and mud, and the air intake for blockage. |
| 000105.16 | Manifold air temperature moderately high | Ease off the load, clean the radiator and cooler screens; dealer if it stays. |
| 000105.03 | Manifold air temperature sensor voltage too high | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000105.04 | Manifold air temperature sensor voltage too low | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000107.00 | Air filter restricted | Stop at a safe time, clean or replace the air filter element as the handbook shows, and check the intake hose for splits. |
| 000110.00 | Engine coolant temperature extremely high | Stop working, idle for a minute to cool, then stop. Let it cool before opening anything. Check the coolant level, and clean the radiator and grille screens. Call your dealer if it comes back. |
| 000110.16 | Engine coolant temperature moderately high | Ease off the load and clean the radiator, grille and cooler screens. Check the coolant level when cold. Dealer if it keeps happening. |
| 000110.15 | Engine coolant temperature high (least severe) | Early warning: ease off the load, clean the radiator and grille screens, check the coolant level when cold. |
| 000110.03 | Engine coolant temperature sensor voltage too high | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000110.04 | Engine coolant temperature sensor voltage too low | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000111.01 | Engine coolant level low | Stop. Wait for the engine to cool fully, then check and top up the coolant to the mark and look for leaks. If it keeps dropping, dealer. |
| 000158.17 | ECU power-down error (battery power was removed too soon after switching off) | Switch off with the key and wait before isolating the battery. Check the battery terminals are tight and clean. |
| 000171.03 | Ambient air temperature signal out of range | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000174.00 | Fuel temperature extremely high | Ease off the load; dealer if it stays. |
| 000174.16 | Fuel temperature moderately high | Ease off the load; dealer if it stays. |
| 000174.15 | Fuel temperature high (least severe) | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000174.03 | Fuel temperature sensor voltage too high | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000174.04 | Fuel temperature sensor voltage too low | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000189.00 | Engine speed derate (power is being limited) | Look for other active codes; the engine is limiting itself for protection. Dealer. |
| 000190.00 | Engine overspeed, extreme | Stop the engine. Do not restart until your dealer has checked it. |
| 000190.16 | Engine overspeed, moderate | Ease off and avoid over-revving on downhills; dealer if it returns. |
| 000620.03 | Sensor supply voltage too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000620.04 | Sensor supply voltage too low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000629.13 | ECU (engine controller) error | Switch off and restart once. If it returns, dealer. |
| 000639.13 | CAN bus error (controllers not talking) | Check the battery terminals and engine harness plugs; dealer if it stays. |
| 000729.03 | Inlet air heater signal high | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000729.05 | Inlet air heater signal low | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000970.31 | Auxiliary engine shutdown switch is active | Check whether an external shutdown switch has been operated or is stuck. |
| 000971.31 | External engine derate switch is active | Check whether an external derate switch has been operated or is stuck. |
| 001109.31 | Engine shutdown warning: the engine is about to shut down | Stop and park safely now, before the engine stops itself. Check oil, coolant and look for other codes. |
| 001110.31 | Engine shutdown (protection has stopped the engine) | Leave it stopped. Check the oil and coolant levels and the other codes for the cause; dealer. |
| 001568.02 | Torque curve selection switch invalid | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 001569.31 | Fuel derate (power limited) | Look for other active codes; dealer. |
| 002000.13 | Security violation (controller security check failed) | Dealer: the controller or software does not match. |
Fault codes: PowerTech engines with Denso high-pressure common rail ('475'): injector, rail and pump SPN/FMI codes
Engine controller (ECU), injectors and common-rail pump
| Code | Meaning | What to do |
|---|---|---|
| 000094.03 | Fuel rail pressure sensor voltage too high | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000094.04 | Fuel rail pressure sensor voltage too low | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000094.10 | Fuel rail pressure loss detected | Check the fuel level and filters. Never slacken high-pressure fuel lines with the engine running or just stopped. Dealer. |
| 000094.13 | Fuel rail pressure higher than expected | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000094.17 | Fuel rail pressure not developed | Check the fuel level, filters and for air in the supply. If it will not start or keeps stalling, dealer. |
| 000611.03 | Electronic injector wiring shorted to power | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000611.04 | Electronic injector wiring shorted to ground | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000627.01 | Electronic injector supply voltage problem | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.07 | Crank and pump timing moderately out of sync | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.02 | Pump position sensor input noise | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.08 | Pump position sensor input missing | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.10 | Pump position sensor input pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.02 | Crank position input noise | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.08 | Crank position input missing | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.10 | Crank position input pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000676.03 | Glow plug relay voltage high | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000676.05 | Glow plug relay voltage low | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 001080.03 | Fuel rail pressure sensor supply voltage too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001080.04 | Fuel rail pressure sensor supply voltage too low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001347.03 | Pump return shorted high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001347.05 | Pump control valve error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001347.07 | Fuel rail pressure control error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001568.02 | Torque curve selection invalid | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 001069.09 | Tyre size invalid | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 001069.31 | Tyre size error | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000651.05 | Cylinder 1 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000651.06 | Cylinder 1 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000651.07 | Cylinder 1 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000652.05 | Cylinder 2 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000652.06 | Cylinder 2 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000652.07 | Cylinder 2 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000653.05 | Cylinder 3 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000653.06 | Cylinder 3 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000653.07 | Cylinder 3 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000654.05 | Cylinder 4 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000654.06 | Cylinder 4 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000654.07 | Cylinder 4 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000655.05 | Cylinder 5 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000655.06 | Cylinder 5 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000655.07 | Cylinder 5 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000656.05 | Cylinder 6 injector circuit open | Check the injector plug and wiring at the engine; if the engine runs rough or misfires, dealer. |
| 000656.06 | Cylinder 6 injector circuit shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000656.07 | Cylinder 6 injector delivery failure | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
Fault codes: PowerTech engines with Stanadyne DE10 pump: pump-specific SPN/FMI codes
Engine controller (ECU) and rotary fuel injection pump
| Code | Meaning | What to do |
|---|---|---|
| 001076.00 | Pump control valve closing too slowly | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.01 | Pump control valve closing too quickly | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.03 | Pump solenoid current too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.05 | Pump solenoid circuit open | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.06 | Pump solenoid circuit severely shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.07 | Pump control valve closure not detected | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.10 | Pump solenoid circuit moderately shorted | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001076.13 | Pump current decay time invalid | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.02 | Engine position sensor noise detected | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.08 | Engine position sensor signal missing | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.10 | Engine position sensor pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.01 | Timing (crank) sensor signal pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.02 | Crank position input noise | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.10 | Crank position input pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000627.04 | ECU unswitched (permanent) power missing | Check the engine controller fuse and battery feed; dealer if it stays. |
| 001079.03 | Sensor supply voltage too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001079.04 | Sensor supply voltage too low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000084.31 | Vehicle speed mismatch | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000091.07 | Throttle calibration invalid | The dealer will need to recalibrate the throttle. |
| 000091.10 | Throttle voltage low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000091.14 | Throttle voltage out of range | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000190.01 | Engine speed below normal, most severe | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
Fault codes: PowerTech engines with Bosch VP44 pump: pump-specific SPN/FMI codes
Engine controller (ECU) and electronic VP44 injection pump
| Code | Meaning | What to do |
|---|---|---|
| 000094.01 | Fuel supply pressure extremely low | Check the fuel level, the fuel filters (change if overdue) and for air leaks in the supply line. Dealer if it stays. |
| 000094.18 | Fuel supply pressure moderately low | Check the fuel level and filters and for air leaks in the supply line. |
| 000094.03 | Fuel supply pressure sensor voltage too high | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000094.04 | Fuel supply pressure sensor voltage too low | Check the sensor plug is fully home and the wiring is undamaged; dealer if it stays. |
| 000084.02 | Vehicle speed mismatch | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000629.19 | ECU to pump communication error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000632.02 | Fuel shut-off error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000632.05 | Fuel shut-off non-functional | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.02 | Pump position input noise | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.08 | Pump position input missing | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000636.10 | Pump position input pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.02 | Crank position input noise | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.08 | Crank position input missing | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000637.10 | Crank position input pattern error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000810.02 | Calculated vehicle speed input noise | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 000898.09 | Vehicle speed invalid or missing | Note the code. If it is not active now or goes away after a restart, mention it at the next service; if it stays, tell your dealer. |
| 001069.02 | Tyre size error (wrong size set for the speed calculation) | The dealer can set the correct tyre size. |
| 001076.02 | Pump has detected a defect | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001077.07 | Pump is trying to fuel without being commanded | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001077.11 | Pump supply voltage out of range | Check the battery and charging; dealer if it stays. |
| 001077.12 | Pump self-test error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001077.19 | Pump detected a communication error | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001077.31 | Pump has put the engine into protection | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001078.07 | ECU and pump timing moderately out of sync | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001078.11 | ECU and pump speed out of sync | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001078.31 | ECU and pump timing extremely out of sync | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001079.03 | Sensor supply 1 voltage too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001079.04 | Sensor supply 1 voltage too low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001080.03 | Sensor supply 2 voltage too high | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001080.04 | Sensor supply 2 voltage too low | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 001485.02 | Pump power relay fault | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
| 000627.04 | ECU unswitched power missing | Check the engine controller fuse and battery feed; dealer if it stays. |
| 000174.31 | Fuel temperature sensor faulty | Finish the job safely, then have your dealer read the stored code. Note the full code and whether it comes back. |
Repair guides
- Fuel filters: draining, changing both and bleeding (6530, 6630, 6930 Premium) (Easy, 40 minutes): Water in the fuel filter, hard starting or poor power, or the 500-hour filter change is due.
- Wheel bolt and nut torques (6530, 6630, 6930 Premium) (Easy, 30 minutes): New or removed wheels, or the periodic wheel bolt check.
- Engine drive belt replacement (6530, 6630, 6930 Premium) (Moderate, 1.5 hours): Cracked or glazed belt, squealing, or charging and cooling problems.
- Brake discs, water pump and engine warnings (6030 Premium six-cylinders) (Specialist, Dealer job): Pedals sinking, grabbing or noisy brakes; coolant temperature gauge shooting to red; or engine trouble linked to head gaskets or the EGR valve and cooler.
The full step-by-step guides are in Farmyard Workshop once you add your tractor.
Parts list with genuine part numbers
John Deere Maintenance and Wear Parts Catalog PC4957G (6030 series, ed. 31-Aug-2010; German text, names translated)
Filters
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Air filter | AL150288 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Air filter | AL172780 | 1 | length 183 mm (7-7/32") only 6530. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Air filter | AL172781 | 1 | Serial -XXXXXX. length 284 mm (11-3/16") only 6630,6830, 6930. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Filter element | RE529643 | 1 | (E) only 6534. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Oil filter | AL156625 | 1 | length 151,6 mm (5-31/32"). Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Oil filter | AL169573 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Air filter | AL177184 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Air filter | AL177185 | 2 | (A). Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Filter element | L152026 | 2 | (B). Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Filter | L155288 | 2 | (C). Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Filter element | RE522878 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Activated carbon filter | L156225 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Filter element | RE529644 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Fuel filter | RE526557 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
Engine
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Belt | L114488 | 1 | length 1915 mm (75-25/64"). Wear/service part |
| Belt | L114290 | 1 | (A) length 2385 mm (93-15/16"). Wear/service part |
| Hose | L167575 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hose | L170862 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Cap | L167674 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 9M7774 | 5 | M6X12. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Rail | L168498 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Nut | L168085 | 4 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Fan shroud | L176300 | 1 | ( substitutes for L169327). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 37M7305 | 4 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Washer | 24M7250 | 4 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hose | L116423 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Insulator | L175735 | 2 | ( substitutes for L151665). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Lining | L154938 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Lining | L154939 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Clamp | AR48236 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Filler cap | AL78005 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Rivet | L168497 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Drain plug | AL155781 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | L169998 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | L169999 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Drain tap | AL176130 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Cap | L169974 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
Electrical
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Stud | 2M7058 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 9M7786 | 1 | M10X30. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Decal | R116617 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Starter kit | RE527400 | 1 | MARKEDRE526375. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Starter motor (exchange) | SE501868 | 1 | (B). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Nut | 4M7274 | 1 | M10. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Spring washer | 2M7135 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Cable tie | H77698 | 1 | length 360 mm (14.2"). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Decal | T146102 | 1 | (A). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Fuse | 57M7689 | as required | 10A. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Fuse | 57M7690 | as required | 15A. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Fuse | 57M7691 | as required | 20A. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Fuse | 57M8163 | as required | 30A. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Fuse | 57M7993 | as required | (A)70A. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Alternator | AL166646 | 1 | 14V/120A. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Alternator | AL166645 | 1 | 14V/90A. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Alternator | AL166647 | 1 | 14V/150A. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Alternator | AL170947 | 1 | 14V/200A. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Centre sheave | AL166836 | 1 | ( substitutes for AL161112). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Plug | L157496 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Washer | 24M7027 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Nut | 14M7028 | 1 | M5. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Bulb | AT130104 | as required | H3,12V/55W. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Bulb | 57M7166 | as required | H4,12V/60/55W. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Bulb | R136239 | as required | 12V/55W( substitutes for 57M7358). Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Bulb | 57M6394 | as required | 12V/5W. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Bulb holder | L64144 | as required | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Bulb | 57M7013 | as required | 12V,10W. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Bulb | 57M7019 | as required | H1,12V/55W. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Bulb | R133301 | as required | 12V-21W( substitutes for 57M7014). Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Bulb | M136357 | as required | 12V-21/5W( substitutes for 57M7011). Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Bulb | 57M6498 | as required | 12V/5W. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
Transmission
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Taper bearing cup | L154620 | 2 | |
| Taper bearing cone | AL156506 | 2 | |
| Wear ring | L76058 | 2 | |
| Radial oil seal | AL158922 | 2 | Wear/service part |
| Radial oil seal | AL69712 | 2 | Wear/service part |
| Taper bearing cup | L154621 | 2 | |
| Taper bearing cone | AL156503 | 2 | |
| Snap ring | L76059 | 2 |
Brakes
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Piston | L111978 | 2 | |
| O-ring | L56243 | 2 | |
| O-ring | L56246 | 2 | |
| Brake disc | AL171954 | 2 | TK=4,9 mm. Wear/service part |
| Brake disc | AL171955 | 2 | (A)TK=5,9 mm. Wear/service part |
| Washer | L114053 | 2 | TK=22 mm |
Hydraulics
| Part | Part number | Qty | Notes |
|---|---|---|---|
| O-ring | L59904 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Fitting | R94882 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | 51M7048 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Adapter fitting | 38H5013 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | 51M7040 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Adapter fitting | 38H5001 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | 51M7043 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Adapter fitting | 38H5010 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | T77932 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Oil line | AL167658 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | T77858 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hydraulic hose | AL176400 | 1 | only FOR6830PR,6930PR( substitutes for AL170836). Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | T77814 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | 51M7041 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hose | AL168952 | 1 | only FOR6830PR,6930PR. Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | T59014 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 19M7576 | 4 | M10X30,(10.9). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Elbow fitting | AL172007 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hydraulic hose | AL176426 | 1 | only FOR6830PR,6930PR. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Clamp | L171572 | 2 | ( substitutes for L153419). Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | T77613 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | 51M7100 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hydraulic oil reservoir | AL110340 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Set screw | L100271 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | L77586 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| O-ring | 51M7103 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hose | AL201361 | 1 | (A). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Oil pump | AL166637 | 1 | 28CM3 |
| Oil pump | AL166639 | 1 | 45CM3 |
| Hydraulic pump (exchange) | PG200867 | 1 | (A)45CM3 |
| Screw | 19M7789 | 2 | M12X30 |
| Gasket kit | AL158422 | 1 | |
| O-ring | T42302 | 1 | |
| Drain plug | 15M7079 | 1 | |
| Parts kit | AL158423 | 1 | |
| Hydraulic hose | AL169555 | 1 | |
| O-ring | 51M7039 | 1 | |
| Hose | AL168801 | 1 | |
| Hydraulic hose | AL176422 | 1 | |
| Fitting | L110064 | 1 | |
| Clamp | L112762 | 2 | |
| Hose | L174060 | 1 | |
| Hydraulic hose | AL180156 | 1 | |
| Flange fitting | L201123 | 1 | ( substitutes for L170842APPL) |
| Screw | 19M7785 | 2 | M10X25,(10.9) |
| Gasket | L77317 | 1 | |
| O-ring | 51M7045 | 1 | |
| Adapter fitting | 38H5193 | 1 | |
| Oil line | AL178099 | 1 | |
| Adapter fitting | 38H5002 | 1 | |
| O-ring | U41966 | 1 | |
| Screw | 19M7660 | 3 | M8X20 |
| Flange fitting | L174175 | 2 | |
| O-ring | L170402 | 1 | |
| Screw | L79006 | 1 | |
| Screw | L171593 | 2 | |
| Flange fitting | L173942 | 1 | |
| Hose | L173940 | 1 | |
| Hydraulic hose | AL172931 | 1 | |
| Hydraulic pump | AL156335 | 1 | |
| Elbow fitting | 38H5019 | 1 | |
| O-ring | 51M7047 | 1 | |
| Hose | L176627 | 1 | |
| Hydraulic hose | AL180946 | 1 | |
| Hydraulic pump | AL180950 | 1 | |
| Stud | L201164 | 2 | |
| Flange fitting | L176623 | 1 | |
| Nut | 14M7274 | 2 | M10 |
| Washer | 24M7044 | 3 | |
| Screw | 19M8533 | 4 | M10X25 |
| Hydraulic coupler socket | AL166181 | as required | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Seal kit | AL166745 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Seal kit | AL112953 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Cover | L112370 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hydraulic coupler socket | AL202353 | 1 | INCLKEY5( substitutes for AL172003,AL178991). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hydraulic coupler socket | AL202354 | 1 | INCLKEY5( substitutes for AL172004,AL178992). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Seal kit | AL205022 | 1 | ( substitutes for AL166745). Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Seal kit | AL173668 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Cover | AL177681 | as required | (B)MARKEDII. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Cover | AL177682 | as required | (C)MARKEDIII. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Cover | AL177683 | as required | (D)MARKEDIV. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Rubber boot | L170078 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Spring clip | L167490 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Rubber boot | L170077 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Spring clip | L158630 | as required | (E). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Sleeve | L170081 | as required | (E). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Plug | L170555 | as required | (A)MARKEDI. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Plug | L170556 | as required | (B)MARKEDII. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Plug | L170557 | as required | (C)MARKEDIII. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Plug | L102157 | as required | (D)MARKEDIV. Listed for the wider 6030-series group (cylinder/series column); check serial |
Front axle
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Radial oil seal | AL161315 | 4 | Wear/service part |
| Snap ring | 0M1872 | 2 | |
| Gasket | AL160535 | 2 |
Operator's station
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Gas strut | AL174356 | 1 | (A)( substitutes for AL78987). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Gas strut | AL174358 | 1 | (B). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Ball stud | R237474 | 1 | ( substitutes for R97588). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Gas strut | AL174357 | 1 | (C)( substitutes for AL114803). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Ball stud | L113715 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Gas strut | AL174087 | 1 | (D). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Ball stud | L78979 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Windscreen | L171336 | 1 | (A). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Window glass | L171338 | 1 | (B). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Window glass | L171333 | 1 | LH. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Window glass | L171334 | 1 | RH. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Door | L169103 | 1 | RH. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Window glass | L171927 | 1 | RH. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Window glass | L171928 | 1 | LH. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Window glass | L171335 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Holder | AL77485 | 1 | LH. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Holder | AL77486 | 1 | RH. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Cap | L79775 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Rear view mirror | AL78021 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Mirror glass | L79776 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Bulb holder | L79777 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Holder | L79778 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 21M7423 | 2 | M6X30. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Washer | 24M7362 | 4 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | L153130 | 4 | (10.9). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Parts kit | AL78834 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Console | AL77483 | 1 | LH. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Console | AL77484 | 1 | RH. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Frame tube | L78174 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Knob | L78176 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Rod | L78173 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Adapter fitting | L79784 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 21M7430 | 1 | M6X16. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 19M7660 | 4 | M8X20. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Cap | L38797 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Washer | 24M7053 | 2 | |
| Screw | 19M7827 | 1 | M16X80,(10.9) |
| Hex bolt | 19M7720 | 1 | M16X80,(10.9) |
| Console | AL117577 | 1 | |
| Flange nut | 14M7291 | 1 | M16 |
| Wiper blade | AL153660 | 1 | (A)(B)(C) length 500 mm. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Wiper blade | AL153661 | 1 | (A) length 600 mm. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Wiper arm | AL153662 | 1 | (A)(B). Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Screw | 9M7867 | 4 | M8X25(10.9). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Seat belt | AL155361 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Washer | 24M7252 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Lock nut | R168723 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Spacer | L171439 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | L171438 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Seat belt | AL201826 | 1 | FI. Listed for the wider 6030-series group (cylinder/series column); check serial. Wear/service part |
| Cushion | AL116993 | 1 | (A). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Cushion | AL116992 | 1 | (A). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 1M7467 | as required | M5X16. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Damper | AL117341 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Seat suspension | AL117349 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Adjuster | AL117348 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Damper | AL117346 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Strap | L61612 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Rivet | L39011 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Plate | L38890 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Rod | L38862 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Nut | L38861 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Holder | AL36643 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Extension spring | T82227 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Fork | AL38526 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Needle bearing | AL64034 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Pin | AL41471 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Roller | L38855 | 4 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Bearing | L42041 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Plate | L38853 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Pin | L63562 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Snap ring | 40M7082 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Spring | AL70626 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Seat suspension | AL117340 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Seat suspension | AL117343 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Spring nut | L61627 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Actuator | AL117342 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Parts kit | AL117369 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 37M7293 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Extension spring | L61599 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | L61615 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Clamp | L61607 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Spring | L61610 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Nut | 14M7273 | 1 | M8. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Bush | L61601 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Console | L113889 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Console | L113888 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Washer | 12M1646 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hex bolt | 19H2247 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Decal | R168102 | 2 | (A). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Decal | R168701 | 2 | (B). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Decal | R168702 | 2 | (C). Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 03M7099 | 4 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hex bolt | 19M7560 | 1 | M6X16. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Washer | 24M7251 | 2 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Lock nut | 14M7165 | 2 | M6. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Lock nut | 14M7376 | 1 | M6. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Screw | 03M7317 | 1 | M6X35. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Clamp | L79430 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Spacer | L172629 | 4 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Washer | 24M7178 | 4 | Listed for the wider 6030-series group (cylinder/series column); check serial |
| Lock nut | 14M7167 | 4 | M10. Listed for the wider 6030-series group (cylinder/series column); check serial |
| Hood | L113438 | 1 | Listed for the wider 6030-series group (cylinder/series column); check serial |
Sources
- R524469 Rocker Arm Cover Gasket, 'This part fits your equipment: 6630 Tractor PC4557'
- Filter intervals and numbers for the 6030 Premium family (Deere filter sheet, Apr 2021)
- Years, power, weight, hydraulics, fuel tank, transmission capacity: 6630 Premium
- Oil 19.5 L, coolant 28 L, 500 h / 1,500 h intervals, valve clearances: 6630 Premium engine
- 6530 Premium power, weight, hydraulics
- 6930 Premium (about 155 hp, 2006–2011)
- Filter numbers for the 6.8 L engine (Deere sheet, 7030 Premium small frame, Nov 2020)
- Filter kits and OEM references for the 6630, including serial breaks (Agriline, UK specialist)
- 30-series common faults (Farmers Weekly)
- JD Wartungs- und Verschleissteilekatalog PC4957G (6030 series, European market, 31-Aug-2010), Scribd copy; German part names translated
More from John Deere.