John Deere 8010 series wheeled: 8110, 8210, 8310, 8410 service schedule

John Deere 8010 series · 1999–2002 (TractorData)

Every maker's service job for the John Deere 8010 series wheeled: 8110, 8210, 8310, 8410, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.

Track your 8010 series wheeled: 8110, 8210, 8310, 8410 for free

Versions: MFWD (axle housing 13.6 L)

Service intervals

Job	When
Engine oil and filter change	every 250 hours or every year
Cab fresh air, recirculation and carbon filters	every 250 hours or every year
Fuel filter, strainer and water separator	every 750 hours
Transmission and hydraulic oil filter, and screen	every 750 hours
Fuel tank vent filter	every 750 hours
Engine air filters (primary and secondary)	every year
Transmission and hydraulic oil change	when needed

Service jobs and parts

Engine oil and filter change

Engine · every 250 hours or every year

Deere's sheet says change the oil and filter after the first 100 hours, then every 250 hours or once a year, whichever comes first. The 375-hour extension needs Plus-50 oil, a John Deere filter and a fuel sulphur level that the sheet words oddly, so check your handbook for that condition before using it.

Part	Qty	Notes	Part number
Engine oil	1	15W-40 (10W-30, 5W-40 or 0W-40 in colder weather). Plus-50 II diesel engine oil (viscosity by air temperature: check your handbook). 21.5 L (8110) to 27 L (8410), with filter. Aztec Oils match: EMPROTEC EHPD 15W-40	check your handbook
Engine oil filter	1	Deere filter sheet, 8010 series	DZ101880

Step-by-step

Warm the engine for a few minutes, then park on level ground, apply the park brake, lower the linkage and any implement to the ground, stop the engine, take the key out and chock the wheels.
Remove the drain plug and let the oil run out into the tray.
Remove the old filter or filter cartridge as your handbook shows, and fit the new one with its new seal.
Refit the drain plug and fill with the right quantity of oil.
Start the engine, check for leaks, stop it and recheck the level. Take the old oil to a proper disposal point.

Tools: Drain tray (30 L), Filter wrench or socket, Funnel, Rags, Gloves

Cab fresh air, recirculation and carbon filters

Cab · every 250 hours or every year

Deere's sheet says clean the cab filters every 250 hours or as required and replace them yearly or as required.

Part	Qty	Notes	Part number
Fresh air filter, standard	1	Deere filter sheet, 8010 series. Heavy-duty: RE67828	R119168
Activated carbon filter	1	Same sheet	RE219782
Recirculation filter	1	Same sheet	RE187966

Step-by-step

Open the cab filter covers and take the filters out.
Clean with low-pressure compressed air, or replace if due. Never clean the carbon filter.
Refit the filters and covers.

Tools: Compressed air (low pressure), Screwdriver, Dust mask

Fuel filter, strainer and water separator

Fuel · every 750 hours

Deere's sheet says replace the fuel filter, the water/separator element (if fitted) and the fuel strainer every 750 hours or as required.

Part	Qty	Notes	Part number
Fuel filter	1	Deere filter sheet, 8010 series	AR86745
Fuel water/separator element (if fitted)	1	Same sheet	RE508633
Fuel strainer	1	Same sheet	AR103220

Step-by-step

Stop the engine, take the key out and clean around the filters well.
Drain any water into a container, remove the old filter, separator element and strainer, and fit the new ones with new seals.
Bleed the system as your handbook describes (check your handbook) and start the engine.
Check for leaks.

Tools: Container for fuel, Filter wrench, Rags, Gloves

Transmission and hydraulic oil filter, and screen

Transmission · every 750 hours

Deere's sheet says replace the filter every 750 hours and clean the screen every 1,500 hours.

Part	Qty	Notes	Part number
Transmission/hydraulic oil filter	1	Deere filter sheet, 8010 series	RE174130
Transmission screen	1	Clean every 1,500 hours; replace only if damaged	RE45369

Step-by-step

Park, stop the engine and chock the wheels. Clean around the filter.
Remove the old filter and catch the oil.
Wet the new seal with hydraulic oil only and fit it hand-tight.
Run the engine briefly, stop, check for leaks and recheck the oil level.

Tools: Filter wrench, Drain tray, Rags, Gloves

Fuel tank vent filter

Fuel · every 750 hours

Deere's sheet says replace the fuel tank vent filter every 750 hours (it varies with conditions).

Part	Qty	Notes	Part number
Fuel tank vent filter	1	Deere filter sheet, 8010 series	RE52504

Step-by-step

Find the vent filter on the fuel tank (check your handbook for its position).
Remove the old filter and fit the new one.

Tools: Screwdriver

Engine air filters (primary and secondary)

Engine · every year

Deere's sheet says replace the primary air filter yearly and as required, and the secondary at every second or third primary change.

Part	Qty	Notes	Part number
Primary air filter	1	Deere filter sheet, 8010 series	RE51629
Secondary air filter	1	Same sheet	RE51630

Step-by-step

Stop the engine and take the key out. Open the air cleaner housing.
Take out the primary filter, check it against a light and replace it if damaged or due.
Only fit a new secondary filter when it is due; never clean it.
Close the housing.

Tools: Compressed air (low pressure), Torch

Transmission and hydraulic oil change

Transmission · when needed

The 8010 sheet gives the oil quantity but not a change interval. The 8020's manual says 1,500 hours; for the 8010, check your handbook. The filter is changed with the oil.

Part	Qty	Notes	Part number
Hy-Gard oil	1	UTTO tractor transmission oil. Tractor transmission and hydraulic oil. 140 L including 26.5 L in the clean oil reservoir. Aztec Oils match: AGRITEC UTTO	check your handbook
Transmission/hydraulic oil filter	1	Change with the oil	RE174130

Step-by-step

Warm the oil by driving, then park, stop the engine and chock the wheels.
Drain the oil from the drain plugs (check your handbook for their positions).
Replace the filter and clean the screen.
Refill with Hy-Gard, run the engine, check for leaks and recheck the level.

Tools: Large drain trays, Spanners, Filter wrench, Gloves

Oils, fluids and capacities

System	Oil or spec	Capacity
Engine	John Deere PowerTech 6-cylinder turbo diesel (engine size: check your handbook)
Engine oil	Plus-50 II diesel engine oil (viscosity by air temperature: check your handbook)	21.5 L (8110); 23.5 L (8210); 25 L (8310); 27 L (8410), with filter
Coolant	John Deere Cool-Gard II, 34 L
Valve clearances	Check your handbook
Engine oil	Plus-50 II diesel engine oil (viscosity: check your handbook)	21.5 L (8110); 23.5 L (8210); 25 L (8310); 27 L (8410), with filter
Transmission and hydraulics (shared)	Hy-Gard tractor transmission and hydraulic oil	140 L, including 26.5 L in the clean oil reservoir
MFWD axle housing	85W-140. GL-5 gear lubricant	13.6 L
MFWD wheel hubs	85W-140. GL-5 gear lubricant	3.4 L
Cooling system	Cool-Gard II coolant	34 L
Fuel tank	Diesel	511 L

Specifications


Engine power (TractorData)	8110 183 hp, 8210 205 hp, 8310 227 hp, 8410 261 hp (PTO estimates)
Wheel nut torque and tyre pressures	Check your handbook

Known problems

Interval for the oil change in the 375-hour case

Deere's sheet words the fuel sulphur condition for the 375-hour interval in a way that looks like a misprint. Use 250 hours unless your handbook says otherwise.

Not a full service schedule

No 8010 operator's manual was read, so grease points, axle oil and coolant intervals are left for your handbook.

Repair guides

Hard starting or stalling: fuel filters, strainer and priming (8010, 8020, 8030) (Moderate, 1 hour): Engine cranks but will not start after fuel work or running dry, stalls under load, or water in the fuel.
Weak lift, slow remotes or hot transmission: filter, screen and owner checks (8010, 8020, 8030) (Moderate, 1–2 hours): Lift slow or weak, remotes slow, transmission warning, noisy hydraulics.
Loss of power or black smoke: air filters (8010, 8020, 8030) (Easy, 30 minutes): Black smoke, lack of power, restriction warning.

The full step-by-step guides are in Farmyard Workshop once you add your tractor.

Parts list with genuine part numbers

John Deere 8010 series wheeled: 8110, 8210, 8310, 8410 - maker filter/service sheets and parts lists already cited on the site entry; serial splits are in the row notes

Cab

Part	Part number	Qty	Notes
Fresh air filter, standard	R119168	1	Deere filter sheet, 8010 series. Heavy-duty: RE67828
Activated carbon filter	RE219782	1	Same sheet
Recirculation filter	RE187966	1	Same sheet

Engine service

Part	Part number	Qty	Notes
Engine oil filter	DZ101880	1	Deere filter sheet, 8010 series
Primary air filter	RE51629	1	Deere filter sheet, 8010 series
Secondary air filter	RE51630	1	Same sheet

Fuel

Part	Part number	Qty	Notes
Fuel filter	AR86745	1	Deere filter sheet, 8010 series
Fuel water/separator element (if fitted)	RE508633	1	Same sheet
Fuel strainer	AR103220	1	Same sheet
Fuel tank vent filter	RE52504	1	Deere filter sheet, 8010 series

Transmission and hydraulics

Part	Part number	Qty	Notes
Transmission/hydraulic oil filter	RE174130	1	Deere filter sheet, 8010 series
Transmission screen	RE45369	1	Clean every 1,500 hours; replace only if damaged

Sources

Open Farmyard Workshop