Kverneland Tiger 500 / 600 / 700 / 800 seedbed cultivators service schedule
Cultivators and power harrows · Kverneland Tiger operating instructions, from serial number 12 1233, 11/2019 (Tiger 500 manual read; 600, 700 and 800 have their own manuals on ManualsLib)
Every maker's service job for the Kverneland Tiger 500 / 600 / 700 / 800 seedbed cultivators, counted in hours, with the oils, filters and parts each one needs. Add your implement to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.
Track your Tiger 500 / 600 / 700 / 800 seedbed cultivators for freeVersions: Tiger 500; Tiger 600; Tiger 700; Tiger 800
Service intervals
| Job | When |
|---|---|
| After the season: clean, grease and check wear | every year |
| First day: tines, wheel bolts, bearings and cylinder lock nuts | when needed |
| Weekly: grease, tines, hoses and drawbar | when needed |
| Replace broken tines and reverse or replace tine points | when needed |
Service jobs and parts
After the season: clean, grease and check wear
Storage · every year
After the season clean the cultivator, lubricate all nipples, check the clearance of all bearings, check consumable parts and replace or reverse them, and check the lock nuts of the cylinder end pieces. Keep the pressure washer nozzle at least 30 cm away. Protect exposed piston rod with petroleum jelly.
Step-by-step
- Follow the list in the Maintenance chapter.
Tools: Grease gun
First day: tines, wheel bolts, bearings and cylinder lock nuts
General · when needed
Kverneland says check after the first day of operation: mounting of the tines, torque of the wheel bolts (280 Nm), clearance of the wheel and bogie bearings, and the lock nuts of the cylinder end pieces.
Step-by-step
- Check each item listed and retighten.
Tools: Torque wrench
Weekly: grease, tines, hoses and drawbar
Lubrication · when needed
Weekly per the manual: check tine and wheel mounting, lubricate wing hinges, transport axle slide bearings and wing wheel joints, check hoses for oil leaks and abrasion, check the working depth indicator and the drawbar assembly (eye, drawbar, bolts). Hours are not given, so treat as a weekly check in season.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Grease | 1 | Grease. Grade not stated | check your handbook |
Step-by-step
- Work through the list above each week in use.
Tools: Grease gun
Replace broken tines and reverse or replace tine points
Wear parts · when needed
Replace a broken tine: open the mounting bolt, fit the new tine, pull it back until the bolt touches the axle, tighten to 110 Nm. Retighten the tine point bolt after the first day. Tine points can be reversed if done before the bolt head wears; always fit new bolts and nuts with new points.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Tine point | 1 | Genuine Kverneland; check your parts book | check your handbook |
Step-by-step
- Never hold the bolt head with your hand when turning the point nut.
Tools: Spanners, Torque wrench
Oils, fluids and capacities
| System | Oil or spec | Capacity |
|---|---|---|
| Grease nipples (wing hinges, transport axle slide bearings, wing wheel joints) | Grease. The manual gives no grade | |
| Exposed piston rods in storage | Petroleum jelly or suitable oil |
Specifications
| Tyre pressure | 200/60-14.5: 6 bar; 250/65-14.5: 4.4 bar; 340/55-16: 4 bar |
| Tine tightening torque | 110 Nm |
| Wheel bolt torque | 280 Nm |
| Towing eye bolt torque | 210 Nm |
| Technical specification table (widths, tines, kW) | Not readable from the copy, check your handbook |
Known problems
Pressure washing
Never use the nozzle closer than 30 cm and do not aim at cylinders, bearings or stickers.
Sources
More from Kverneland.