Landini Landpower 125 TDI, 135 TDI, 145 TDI, 165 TDI, 185 TDI service schedule
Landini Landpower · Early to mid 2000s (handbook printed 2005; check your handbook)
Every maker's service job for the Landini Landpower 125 TDI, 135 TDI, 145 TDI, 165 TDI, 185 TDI, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.
Track your Landpower 125 TDI, 135 TDI, 145 TDI, 165 TDI, 185 TDI for freeVersions: Speedsix or Powersix gearbox (Techno / Top); Top-Tronic gearbox
Service intervals
| Job | When |
|---|---|
| Engine oil filter (mid-interval) | every 250 hours |
| Hydraulic and Top-Tronic filters | every 250 hours |
| Engine oil and filter change | every 500 hours or every year |
| Fuel filter | every 500 hours |
| Valve clearance and injectors (dealer) | every 500 hours |
| Closed breather unit (if fitted) | every 500 hours |
| Cooling system drain and flush | every 1,000 hours or every year |
| Gearbox, rear axle and hydraulic oil change | every 1,000 hours |
| Front axle oil change | every 1,000 hours |
Service jobs and parts
Engine oil filter (mid-interval)
Engine · every 250 hours
The maker changes the engine oil filter after 50 hours and then every 250 hours, which is twice as often as the oil.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Engine oil filter | 1 | Genuine number per Sparex S.171589 (Landpower 125-180; 185 not named; also 707209A1) | 3689066M1 |
Step-by-step
- Unscrew the old filter and smear oil on the new seal.
- Fit by hand then half a turn. Run the engine and check for leaks and the oil level.
Tools: Strap filter wrench
Hydraulic and Top-Tronic filters
Hydraulics · every 250 hours
The maker says change the filters on the pump intakes and the delivery filter after 50 hours and then every 250 hours (and when the warning light comes on). Top-Tronic has a second filter on the delivery line.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Hydraulic filter, complete (Landpower) | 1 | Genuine Landini, listed for Landpower series. The listing does not say which filter position, so check your parts book | 3684236M91 |
Step-by-step
- Remove the cartridges from the pump intake and the steering delivery holder.
- Oil the seals and fit by hand, half a turn after contact.
Tools: Filter wrench
Engine oil and filter change
Engine · every 500 hours or every year
The maker says change the engine oil after 50 hours and then every 500 hours, or yearly. 500 hours is the longest allowed; use 250 hours in hard work. The filter is also changed every 250 hours, so change it with the oil as well.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Engine oil | 1 | 15W-40. API CH-4, ACEA E5, ≈16.6 L with filter. Aztec Oils match: EMPROTEC SHPD-X 15W-40 | check your handbook |
| Engine oil filter | 1 | Genuine number per Sparex S.171589 (Landpower 125-180; 185 not named; also 707209A1) | 3689066M1 |
Step-by-step
- Change the oil hot, parked level. Remove the sump plug.
- Unscrew the old filter, oil the seal of the new one, screw on by hand and another half turn.
- Refit the plug (3.5 daNm) and refill to MAX on the dipstick; let it settle before checking.
Tools: Drain tray (20 L), Strap filter wrench
Fuel filter
Fuel · every 500 hours
The maker says change the fuel filter cartridge every 500 hours and clean the bowls. Never wash the cartridges.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Fuel filter cartridge | 1 | Check your handbook or dealer for the number | check your handbook |
Step-by-step
- Drain the bowl with the engine running and clean it.
- Fit the new cartridge, then bleed the system with the lift pump lever.
Tools: Drain tray
Valve clearance and injectors (dealer)
Engine · every 500 hours
Valve clearance is checked every 500 hours and injectors every 1,000 hours by the dealer.
Step-by-step
- Book the dealer to check valves (0.20 mm inlet, 0.45 mm exhaust) and injectors.
Tools: Dealer
Closed breather unit (if fitted)
Engine · every 500 hours
The maker says the closed circuit breather unit is replaced by the dealer every 500 hours and the whole unit every 8,000 hours.
Step-by-step
- Have the dealer replace the breather unit.
Tools: Dealer
Cooling system drain and flush
Cooling · every 1,000 hours or every year
The maker says drain and flush the cooling system every 1,000 hours or once a year. Check antifreeze before winter.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Coolant | 1 | Agrolube Mantos antifreeze, ≈25 to 27 L | check your handbook |
Step-by-step
- Drain the radiator and block, flush with sodium carbonate solution (250 g in 10 L water), then clean water.
- Refill and bleed air.
Tools: Drain tray
Gearbox, rear axle and hydraulic oil change
Hydraulics · every 1,000 hours
The maker says change the transmission, steering and lift oil after the first 500 hours and then every 1,000 hours (all models). Change the filters at the same time.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Transmission/hydraulic oil | 1 | UTTO tractor transmission oil. Sincros/B (Speedsix/Powersix) ≈81 to 85 L; Sincros/C (Top-Tronic) ≈86 L | check your handbook |
| Hydraulic filters | 1 | Genuine number per Sparex S.170402 (Landpower 125-185) | 3684239M91 |
Step-by-step
- Remove the five drain plugs (gearbox and rear axle) and drain.
- Refit, refill to the dipstick, run the engine and recheck.
Tools: Drain tray (100 L), Socket set
Front axle oil change
Axles · every 1,000 hours
The maker lists the front differential and final drives at 1,000 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Front axle oil | 1 | UTTO tractor transmission oil, GL-4 (centre); 80W-90 GL-5 in the final drives | check your handbook |
Step-by-step
- Remove the differential drain plug and drain, then refill to the level.
- Drain each final drive from its plug and refill to the plug level.
Tools: Drain tray
Oils, fluids and capacities
| System | Oil or spec | Capacity |
|---|---|---|
| Engine | Perkins 1106C-E60TA 6-cylinder turbo intercooled diesel (about 6.0 L, bore 100 mm, stroke 127 mm): 125 TDI 117.6 hp, 135 TDI 134 hp, 145 TDI 145.5 hp, 165 TDI 163.2 hp, 185 TDI 183.5 hp (ISO) | |
| Engine oil | 15W-40. API CH-4, ACEA E5, MB 228.3 (Agrolube Kronos LD 15W40). SAE 30 (Kronos 30, API CE/SG, CCMC D4) is given above 27 °C. | ≈16.6 L with filter |
| Coolant | Agrolube Mantos antifreeze, up to 50% (protection to −35 °C). ≈25 L (125/135/145 TDI), ≈27 L (165/185 TDI) | |
| Valve clearances | Inlet 0.20 mm, exhaust 0.45 mm, engine cold. Dealer check every 500 hours. | |
| Gearbox, rear axle, steering and hydraulics (Speedsix/Powersix) | UTTO tractor transmission oil. Landini spec, API GL-4, MF 1135 (Agrolube Sincros/B) | ≈81 L (125 to 145 TDI), ≈85 L (165/185 TDI) |
| Gearbox, steering and hydraulics (Top-Tronic) | UTTO tractor transmission oil. MF 1135-1141 (Agrolube Sincros/C). Never mix with Sincros/B | ≈86 L |
| 4WD front axle, centre | UTTO tractor transmission oil. API GL-4, MF 1135 (Agrolube Sincros/B) | ≈10 to 11.5 L (rises with model) |
| 4WD front final drives (each) | 80W-90. Gear oil API GL-5 / MIL-L-2105D (Agrolube Kriptos 80W-90) | ≈1.6 to 1.9 L |
| Brake and clutch circuit | Mineral brake oil to Landini S/ENG/I 102 (Agrolube Xerons Red) | ≈0.5 L |
| Grease nipples | EP grease. G.M.P. grease EP | per nipple |
| Fuel tank | Diesel | ≈260 L |
Specifications
| Engine speed | Rated 2,200 rpm; idle 1,050 rpm |
| Sump plug torque | 3.5 daNm (26 lbf ft) |
| Transmission level | Only about 7 L can be drawn for external hydraulics at the MAX mark (+10 L at the third mark) |
Known problems
Oil filter interval
The filter is changed every 250 hours while the oil is changed every 500.
Top-Tronic oil
Top-Tronic uses a different oil (Sincros/C) from Speedsix and Powersix (Sincros/B). Never mix them.
Parts list with genuine part numbers
Maker part numbers per site service schedule: Landpower 125 TDI, 135 TDI, 145 TDI, 165 TDI, 185 TDI (Early to mid 2000s (handbook printed 2005; check your handbook)); check serial range
Engine service
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Engine oil filter | 3689066M1 | 1 | Genuine number per Sparex S.171589 (Landpower 125-180; 185 not named; also 707209A1) |
Transmission and hydraulics
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Hydraulic filters | 3684239M91 | 1 | Genuine number per Sparex S.170402 (Landpower 125-185) |
| Hydraulic filter, complete (Landpower) | 3684236M91 | 1 | Genuine Landini, listed for Landpower series. The listing does not say which filter position, so check your parts book |
Sources
- Oil filter OEM numbers
- Hydraulic spin-on filter OEM numbers
- Routine maintenance table, lubricant and fuel chart, engine data (Landpower TDI operator's manual, Scribd, printed 2005)
- Genuine complete hydraulic filter 3684236M91 for Landpower (Partao)
More from Landini.