McCormick X7.440, X7.450, X7.460, X7.650, X7.660, X7.670, X7.680 service schedule

McCormick X7 · 2013–2020 (Eurol pages cover 2015–2020; check your handbook for your serial number)

Covers the McCormick X7.440, X7.450, X7.460, X7.650, X7.660, X7.670, X7.680 (PS-Drive, VT-Drive, P6-Drive).

Every maker's service job for the McCormick X7.440, X7.450, X7.460, X7.650, X7.660, X7.670, X7.680, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.

Track your X7.440, X7.450, X7.460, X7.650, X7.660, X7.670, X7.680 for free

Versions: PS-Drive (powershift); VT-Drive (stepless CVT); P6-Drive (powershift, 2015–2020)

Service intervals

Job	When
Engine oil and filter change	every 500 hours or every 6 months
Front PTO oil change	every 500 hours or every 6 months
Transmission and hydraulic oil and filters change	every 500 hours or every 6 months
Front differential oil change	every 1,000 hours or every year
Front hub reduction oil change	every 1,000 hours or every year
Coolant change	every 1,000 hours or every year
Rear hub reduction oil change	every 1,500 hours or every 18 months

Service jobs and parts

Engine oil and filter change

Engine · every 500 hours or every 6 months

Eurol's advice page, quoting the maker's figures, gives the engine oil change at 500 hours or 6 months, with a level check every 10 hours. The oil and filter are changed together.

Part	Qty	Notes	Part number
Engine oil	1	Grade: check your handbook (the Eurol page names none). X7.440–460: 10 L. X7.650–680: 16 L	check your handbook
Engine oil filter	1	Genuine number not found in any source: check your handbook or parts book	check your handbook

Step-by-step

Warm the engine, stop it and put the tray under the sump. Remove the drain plug and let the oil drain fully.
Refit the plug with a good washer. Unscrew the old filter, wipe the sealing face, oil the new seal and screw the filter on by hand.
Fill to the top mark on the dipstick, run for a few minutes, stop, check for leaks and recheck the level.

Tools: Drain tray (20 L), Filter wrench, Funnel

Front PTO oil change

PTO · every 500 hours or every 6 months

Front PTO housing oil. Eurol shows a change at 500 hours or 6 months. Eurol shows a first change at 250 hours.

Part	Qty	Notes	Part number
Front PTO oil	1	Grade: check your handbook (the Eurol page names none). 2.7 L	check your handbook

Step-by-step

Run the tractor briefly to warm the oil, then park level.
Remove the drain plug, drain, refit and fill to the level plug or sight mark.
Check for leaks.

Tools: Drain tray, Funnel

Transmission and hydraulic oil and filters change

Transmission · every 500 hours or every 6 months

Eurol lists 1,000 hours or 12 months for the X7.440 PS-Drive and for the VT-Drive and P6-Drive pages, and 500 hours or 6 months for the X7.650 to X7.680 PS-Drive. The pages disagree, so this entry uses the shorter 500 hours or 6 months. First change: 250 hours (PS-Drive) or 500 hours (VT-Drive, P6-Drive). Level check every 10 hours. The oil and its filters are changed together.

Part	Qty	Notes	Part number
Transmission and hydraulic oil	1	Grade: check your handbook (the Eurol page names none). 92 L (PS-Drive) or 94 L (VT-Drive and P6-Drive); add 12 L (PS) or 2 L (VT, P6) with a front hitch	check your handbook
Transmission and hydraulic filters	1	Genuine number not found in any source: check your handbook or parts book	check your handbook

Step-by-step

Warm the oil by working the tractor, park level, stop and lower all implements.
Drain the oil from the drain plugs into a large tray, and change the filters as your handbook shows.
Refill to the correct level with the engine off, run for a few minutes and recheck the level.

Tools: Large drain tray (100 L), Filter wrench, Funnel or pump

Front differential oil change

Front axle · every 1,000 hours or every year

Eurol shows 1,000 hours or 12 months, with a first change at 250 hours.

Part	Qty	Notes	Part number
Front differential oil	1	Grade: check your handbook (the Eurol page names none). 4 L (suspended axle) or 6 L (rigid axle)	check your handbook

Step-by-step

Park level and warm the oil if you can.
Remove the drain plug and let the oil drain fully, then refit it.
Refill through the filler or level plug to the correct level and check for leaks.

Tools: Drain tray, Funnel, Spanners

Front hub reduction oil change

Front axle · every 1,000 hours or every year

Eurol shows 1,000 hours or 12 months (1,200 hours on the X7.440 PS-Drive page; the shorter is used), with a first change at 250 hours.

Part	Qty	Notes	Part number
Front hub reduction oil	1	Grade: check your handbook (the Eurol page names none). 1.5 L each side	check your handbook

Step-by-step

Park level and warm the oil if you can.
Remove the drain plug and let the oil drain fully, then refit it.
Refill through the filler or level plug to the correct level and check for leaks.

Tools: Drain tray, Funnel, Spanners

Coolant change

Cooling · every 1,000 hours or every year

Eurol shows a coolant change at 1000 hours or 12 months. 27 L.

Part	Qty	Notes	Part number
Coolant	1	Type: check your handbook. 27 L.	check your handbook

Step-by-step

Let the engine cool fully before opening the cap.
Drain the radiator and block, flush, refit the drains and refill with the correct mix.
Run to temperature, let it cool and top up.

Tools: Drain tray, Hose clamp pliers

Rear hub reduction oil change

Rear axle · every 1,500 hours or every 18 months

Eurol shows 1,500 hours or 18 months.

Part	Qty	Notes	Part number
Rear hub reduction oil	1	Grade: check your handbook (the Eurol page names none). 11 L each side (PS-Drive and VT-Drive) or 9.3 L each side (P6-Drive)	check your handbook

Step-by-step

Park level and warm the oil if you can.
Remove the drain plug and let the oil drain fully, then refit it.
Refill through the filler or level plug to the correct level and check for leaks.

Tools: Drain tray, Funnel, Spanners

Oils, fluids and capacities

System	Oil or spec	Capacity
Engine	X7.440 to X7.460: FPT BetaPower (Eurol gives no more detail). X7.650 to X7.680: FPT NEF 6.7 L 6-cylinder turbo diesel (NEF 6.7-TA(A)), SCR with AdBlue
Engine oil	Check your handbook. Eurol's page gives no grade or spec.	X7.440 to X7.460: 10 L. X7.650 to X7.680: 16 L. Whether this includes the filter: check your handbook
Coolant	27 L. Type: check your handbook.
Valve clearances	Check your handbook. Not given in any source we could read.
Engine oil	Check your handbook	X7.440–460: 10 L; X7.650–680: 16 L
Transmission and hydraulics (PS-Drive)	Check your handbook	92 L, plus 12 L with the optional front hitch
Transmission and hydraulics (VT-Drive, P6-Drive)	Check your handbook	94 L, 96 L with front hitch
Front PTO housing	Check your handbook	2.7 L
Rear hub reductions (each side)	Check your handbook	11 L (PS-Drive, VT-Drive); 9.3 L (P6-Drive)
Front hub reductions (each side)	Check your handbook	1.5 L
Front differential	Check your handbook	4 L (suspended axle) or 6 L (rigid axle)
Cooling system	Check your handbook	27 L
AdBlue tank	AdBlue (ISO 22241)	38 L (PS-Drive); 46 L (VT-Drive, P6-Drive)

Specifications


Engines	FPT BetaPower (X7.440–460), FPT NEF 6.7 L (X7.650–680)
Source type	Lubricant-advisor data (Eurol, quoting the maker's figures); no operator's handbook read. Lower confidence.

Known problems

Pages disagree

Eurol's pages for the different X7 versions give different transmission oil intervals. Follow your own handbook where it differs from this entry.

Sources

Open Farmyard Workshop