McHale Pro Glide F3100 front disc mower conditioner service schedule
Mowers and conditioners · McHale operator's manual Issue 1 (CLT00792_3), undated copy
Covers the McHale Pro Glide F3100 front disc mower conditioner (3.0 m).
Every maker's service job for the McHale Pro Glide F3100 front disc mower conditioner, counted in hours, with the oils, filters and parts each one needs. Add your implement to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.
Track your Pro Glide F3100 front disc mower conditioner for freeService intervals
| Job | When |
|---|---|
| After the first 5 hours: nuts, bolts and gearbox oil | every 5 hours |
| Daily checks: guards, leaks, PTO shaft and blades | every 10 hours |
| Monthly: grease rotor bearings and check gearbox oil level | every month |
| Yearly: drain and change gearbox oil | every year |
| End of season: clean, grease and protect | every year |
Service jobs and parts
After the first 5 hours: nuts, bolts and gearbox oil
General · every 5 hours
McHale: in the first 5 working hours check all nuts and bolts for tightness and check the oil level in the gearboxes.
Step-by-step
- Tighten using the torque table in section 9.2 of the manual.
Tools: Spanners, Torque wrench
Daily checks: guards, leaks, PTO shaft and blades
General · every 10 hours
Every day: check guards and safety devices, check for oil leaks and damaged pipes. The maintenance list also shows PTO shaft and other grease points daily, with the cutting blades checked as well. Weekly: PTO shaft, grease points and ram pivots.
Step-by-step
- Check blades for wear, damage and security. Replace blunt or damaged blades.
Tools: Grease gun
Monthly: grease rotor bearings and check gearbox oil level
Lubrication · every month
McHale lists every month: grease the rotor bearings and check there is enough oil in the gearboxes.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Grease | 1 | Grease. Grade not stated on pages read | check your handbook |
Step-by-step
- Grease the rotor bearings and check the oil level in every gearbox.
Tools: Grease gun
Yearly: drain and change gearbox oil
Gearbox · every year
McHale: every year clean and lubricate all moving parts, and drain and change the gearbox oil. Oil grade and quantity: see the Gearbox oil section of your handbook.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Gearbox oil | 1 | Check your handbook | check your handbook |
Step-by-step
- Drain and refill each gearbox, and check the level.
Tools: Drain tray, Spanners
End of season: clean, grease and protect
Storage · every year
Blow clean with an air line, not a pressure washer. Grease the discs, blades and conditioner tines to stop rust. Lubricate all pivots, grease bolt threads and exposed ram rods. At start of season fill the gearbox oil if needed, tighten all bolts and replace any blunt blades.
Step-by-step
- Wear protective clothing and gloves when greasing the discs and blades.
Tools: Air line, Grease, Gloves
Oils, fluids and capacities
| System | Oil or spec | Capacity |
|---|---|---|
| Gearboxes | Oil type and capacity are in the 'Gearbox oil' section, which was not on the pages read. Check your handbook | |
| Grease points and PTO shaft | Grease. The manual does not name a grade on the pages read |
Specifications
| Cutting width | 3.0 m |
| Cutting discs / blades | 7 discs, 14 blades (2 per disc) |
| PTO speed | 1,000 rpm |
| Conditioner speed | 700 / 1,000 rpm |
| Cutting disc speed | 3,200 rpm |
| Tractor power | 80 kW / 108 hp minimum |
| Hydraulics | Single-acting supply with float, 180 bar, 20 L/min |
| Bolt torque 8.8 (Nm) | M8 23; M10 45; M12 78; M16 195; M20 370 (table read as text; check handbook) |
Known problems
Pressure washing
McHale recommends blowing down with an air line instead of a pressure washer.
Parts list with genuine part numbers
McHale Pro Glide F3100 spare parts book (CLT00905)
Headstock frame
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Lower arm assembly mower suspension | ACH01530 | 1 | |
| Headstock weld assembly F3100 | ACH01556 | 1 | |
| 10MM mower stand leg | ALA00696 | 2 | |
| Spring tensioner pivot arm | ALA00697 | 2 | |
| Pin assembly mower stand | ALA00747 | 2 | |
| Link arm 25MM front mower | ALA00819 | 2 | |
| Bearing glacier pm 4020 dx | CBR00268 | 8 | Service part |
| Linch pin 10MM | CFA00005 | 3 | |
| Setscrew M10x25 zinc plated | CFA00024 | 4 | |
| Setscrew M12x30 zinc plated | CFA00032 | 4 | |
| Grease nipple M8x1.25 straight | CFA00118 | 8 | |
| Nut M16 nyloc | CFA00128 | 2 | |
| Nut M8 nyloc zinc plated | CFA00132 | 2 | |
| Washer flat 16MM zinc plated | CFA00140 | 4 | |
| Washer flat 8MM zinc plated | CFA00147 | 4 | |
| Linch pin 6MM | CFA00202 | 2 | |
| Washer SKM12 | CFA00250 | 4 | |
| Washer SKM10 | CFA00251 | 4 | |
| Washer SKM16 | CFA00252 | 4 | |
| Nut M20 | CFA00304 | 2 | |
| Bolt M16x55 | CFA00315 | 4 | |
| Washer flat 5MM | CFA00320 | 4 | |
| Nut M5 nyloc | CFA00321 | 2 | |
| Washer flat 20MM zinc plated | CFA00413 | 4 | |
| Rubber strap 240 mm | CFA00476 | 2 | |
| Setscrew M8x30 zinc plated | CFA00491 | 2 | |
| Bolt M16 x 80 zinc plated | CFA00498 | 2 | |
| Roll pin 12x60 zinc plated | CFA00504 | 2 | |
| Circlip 40MM external | CFA00551 | 2 | |
| Setscrew M5x50 zinc plated grade 8.8 | CFA01129 | 2 | |
| Bolt M20x500 zinc plated | CFA01088 | 2 | |
| Pin 25.4x135MM top link | CMH00015 | 1 | |
| Pin 28x139 lower link cat 2 | CMH00025 | 2 | |
| Pin 40x153.5 stepped 25 zinc plated | CMH01606 | 2 | |
| Pin 40x30 | CMH01610 | 4 | |
| Pin 40x118 stepped 35 | CMH01638 | 2 | |
| Spring 17mm front mower | CSG00293 | 2 | |
| Valve 3/8 w lever lock & holes | CVA00613 | 1 | |
| 4MM l washer 10.5x50x4 zinc plated | CZD02479 | 4 | |
| Washer 12.5x55x4 | CZD03011 | 2 | |
| 4MM l washer 16x55x4 zinc plated | CZD04321 | 4 | |
| 6MM l washer 12.5x40x6 | CZF06923 | 2 | |
| 6MM PTO hanger bracket F3100 | CZF07930 | 1 |
PTO shaft primary
| Part | Part number | Qty | Notes |
|---|---|---|---|
| PTO shaft front mower maindrive | CMT00389 | 1 | |
| PTO half shaft CMT00389 inner | CMT00427 | 1 | |
| PTO half shaft CMT00389 outer | CMT00428 | 1 | |
| PTO guard primary shaft mowers | CGD00432 | 1 | Inner & outer guards |
| Yoke complete short- PTO shaft | CMT00268 | 1 | |
| Yoke complete long QSG2400 PTO shaft | CMT00435 | 1 | Suitable for long pto tractor stubshaft only |
| Kit quick release short dr PTO | CMT00174 | 1 | |
| Lock complete long qs type c P400 PTO shaft | CMT00436 | 1 | Suitable for long pto tractor stubshaft only |
| Clamp yoke complete AGKF2400 PTO shaft | CMT00091 | 1 | |
| Bolt M12x75 8.8 zinc plated DIN931 | CFA00928 | 1 | |
| Nut M12 nyloc | CFA00124 | 1 | |
| Universal joint P400 PTO shaft | CMT00438 | 2 | |
| Grease nipple PTO shaft | CFA00097 | 2 | |
| Inboard yoke RG2400-S4 PTO shaft | CMT00439 | 1 | |
| Roll pin 10x80 PTO shaft | CFA00629 | 2 | |
| Screw 6x14 P400-PG25 PTO shaft | CFA01134 | 2 | |
| Sealing ring outer profile S5 P400 PTO | CMT00440 | 1 | Service part |
| Profile tube S5H 1000 PTO shaft P400 | CMT00441 | 1 | |
| Plug profile S5 PTO shaft P400 | CMT00442 | 1 | |
| Inboard yoke rg 2400-S5 PTO P400 | CMT00443 | 1 | |
| PTO guard ring | CMT00242 | 2 | |
| PTO guard cone | CMT00241 | 1 | |
| Guard cone PTO shaft P400 | CMT00444 | 1 | |
| Decal warning PTO shaft | CST00132 | 1 |
PTO shaft secondary
| Part | Part number | Qty | Notes |
|---|---|---|---|
| PTO shaft ftont mower secondary | CMT00390 | 1 | |
| PTO half shaft CMT00390 inner | CMT00429 | 1 | |
| PTO half shaft CMT00390 outer | CMT00430 | 1 | |
| PTO guard secondary front complete | CGD00433 | 1 | Inner & outer guards |
| Clutch friction K92/4-2400 PTO shaft | CMT00445 | 1 | |
| Clutch overrunning key type RH PTO | CMT00446 | 1 | |
| Universal joint 2400P PTO shaft | CMT00447 | 2 | |
| Grease nipple PTO shaft | CFA00097 | 2 | |
| Inboard yoke RG2400-S4 PTO shaft | CMT00439 | 1 | |
| Roll pin 10x80 PTO shaft | CFA00629 | 2 | |
| Screw 6x14 P400-PG25 PTO shaft | CFA01134 | 2 | |
| Sealing ring outer profile S5 P400 PTO | CMT00440 | 1 | Service part |
| Profile tube S5H 1000 PTO shaft P400 | CMT00441 | 1 | |
| Plug profile S5 PTO shaft P400 | CMT00442 | 1 | |
| Inboard yoke rg 2400-S5 PTO P400 | CMT00443 | 1 | |
| PTO guard ring | CMT00242 | 2 | |
| Guard cone PTO shaft P400 | CMT00444 | 2 |
Suspension arm
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Torque arm assembly mower suspension | ACH01602 | 1 | (2-pin offset pivot) used up to serial no. 1002363 (also order longer 848mm version of items 5 & 6) |
| Torque arm assembly front mower | ACH01601 | 1 | (1-pin centre pivot) used from serial no. 1002364 |
| Lower arm assembly mower suspension | ACH01530 | 1 | |
| Pin 30x105 mower suspension | ALA00748 | 2 | |
| Ram lock bracket front mower | ALA00761 | 1 | |
| Link arm 790MM front mower | ALA00818 | 1 | Used up to serial no. 1002363 |
| Link arm 848MM front mower | ALA00912 | 1 | Used from serial no. 1002364 |
| Link arm 790MM front mower | ALA00824 | 1 | Used up to serial no. 1002363 |
| Link arm 848MM front mower | ALA00913 | 1 | Used from serial no. 1002364 |
| Buffer rubber 75x25 M12x30 | CBE00275 | 2 | |
| Door holder rubber female M6 hole | CBE00322 | 1 | |
| Bearing glacier pm 4040 sy | CBR00082 | 2 | Service part |
| Bearing glacier pm 2525 dx | CBR00039 | 1 | Service part |
| Setscrew M10x30 | CFA00025 | 4 | |
| Setscrew M12x30 zinc plated | CFA00032 | 2 | |
| Setscrew M12x35 zinc plated | CFA00033 | 6 | |
| Grease nipple M8x1.25 straight | CFA00118 | 3 | |
| Nut M10 nyloc zinc plated | CFA00123 | 12 | |
| Nut M12 nyloc | CFA00124 | 2 | |
| Nut M6 nyloc | CFA00131 | 1 | |
| Nut M8 nyloc zinc plated | CFA00132 | 1 | |
| Washer flat 12MM zinc plated | CFA00138 | 6 | |
| Washer flat 6MM zinc plated | CFA00144 | 2 | |
| Washer flat 8MM zinc plated | CFA00147 | 1 | |
| Washer flat 10 mm zinc plated | CFA00201 | 12 | |
| Linch pin 6MM | CFA00202 | 1 | |
| Washer flat 14MM zinc plated | CFA00222 | 1 | |
| Washer SKM12 | CFA00250 | 2 | |
| Setscrew M10x25 cup sq zinc plated | CFA00442 | 8 | |
| Nut M12 hexagon lock/half nut | CFA00446 | 1 | |
| Rubber strap 240 mm | CFA00476 | 1 | |
| Setscrew M8x30 zinc plated | CFA00491 | 1 | |
| Roll pin 12x60 zinc plated | CFA00504 | 6 | |
| Bolt M12x60x10.9 fine thread zinc plated | CFA00586 | 1 | |
| Washer M12 nordloc | CFA00799 | 6 | |
| Setscrew M6x20 button head zinc plated | CFA02335 | 1 | |
| Pin 25 x 110 milled for cap zinc plated | CMH00443 | 1 | |
| Bush 8x20x13 zinc plated | CMH00742 | 1 | Service part |
| Shaft 40x280 | CMH01597 | 2 | |
| Bush 30x45x21 zinc plated | CMH01641 | 4 | Service part |
| Bush 25x35x25 | CMH01694 | 1 | Service part |
| Pin 25 x 110 milled for cap zinc plated | CMH01695 | 1 | |
| Shaft 40x615 zinc plated | CMH01728 | 1 | |
| Gearbox mower input | CMT00358 | 1 | |
| Ram 50x30 sa pull cylinder | CRA00794 | 1 | |
| Spring extension 4.06x42x242 | CSG00283 | 1 | |
| 6MM l cap short for 25MM pins | CZF00293 | 2 | |
| 6MM l washer 12.5x40x6 | CZF06923 | 2 | |
| 6MM ram transport lock handle | CZF07304 | 1 | |
| 6MM mower stop bracket | CZF07570 | 2 | |
| 10MM spacer washer part | CZH03990 | 2 |
Main frame
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Mower cuterbar mounting bracket | ACH02838 | 1 | |
| Mower conditioner baffle weld ass | ACH02840 | 1 | |
| Mower conditioner complete assembly | ACH02843 | 1 | Includes items 6, 19, 39, 53 & 54 |
| Front mower chassis weld asm | ACH02839 | 1 | Up to serial no. 1002257 (offset-pivot) |
| Front mower chassis weld asm | ACH01577 | 1 | From serial no. 1002258 (centre-pivot) |
| Mower conditioning hood double adjust | ACH02861 | 1 | |
| Mower conditioner finished weld assembly | ACH02952 | 1 | |
| Mower conditioner shaft guard | AGD00048 | 1 | |
| Bearing sq flange 40MM esfe 208 (snr) | CBR00126 | 1 | Service part |
| Bearing spherical 30MM GE30ES 2RS | CBR00127 | 1 | Service part |
| Setscrew M10x20 zinc plated | CFA00023 | 2 | |
| Setscrew M10x30 | CFA00025 | 9 | |
| Setscrew M12x30 zinc plated | CFA00032 | 8 | |
| Bolt M16x100 zinc plated | CFA00040 | 2 | |
| Setscrew M8x20 zinc plated | CFA00052 | 2 | |
| Setscrew M8x25 zinc plated | CFA00102 | 2 | |
| Nut M10 nyloc zinc plated | CFA00123 | 9 | |
| Nut M14 nyloc | CFA00126 | 4 | |
| Nut M16 nyloc | CFA00128 | 50 | |
| Nut M20 nyloc | CFA00129 | 1 | |
| Nut M8 nyloc zinc plated | CFA00132 | 4 | |
| Washer flat 16MM zinc plated | CFA00140 | 2 | |
| Washer flat 8MM zinc plated | CFA00147 | 6 | |
| Washer flat 10 mm zinc plated | CFA00201 | 25 | |
| Setscrew M16x35 zinc plated | CFA00229 | 8 | |
| WASHER_SKM8 | CFA00249 | 2 | |
| Washer SKM12 | CFA00250 | 8 | |
| Washer SKM10 | CFA00251 | 2 | |
| Setscrew M14x45 zinc plated | CFA00306 | 4 | |
| Grubscrew M8x20 | CFA00319 | 1 | |
| Bolt M20x120 zinc plated | CFA00395 | 1 | |
| Setscrew M14x30 zinc plated | CFA00398 | 4 | |
| Washer SKM14 | CFA00449 | 12 | |
| Setscrew M8x20 cuphead sq zinc plated | CFA00506 | 2 | |
| Washer NL16 nord-lock | CFA00783 | 15 | |
| Bolt M16x70 zinc plated grade 8.8 | CFA01034 | 4 | |
| Key 12x8x50 | CFA01076 | 1 | |
| M12 index plunger | CFA02300 | 1 | |
| Bolt cuphead M16x47 12.9 | CFA02305 | 48 | |
| Setscrew M16x20 soc cap 10.9 zinc plated | CFA02306 | 4 | |
| Bush 17x30x39 | CMH01028 | 4 | Service part |
| Mower cutterbar weld asm RH | CMT00356 | 1 | |
| Coupling jaw (standard 48)105 od | CMT00365 | 1 | |
| Coupling spider 48-98 shore | CMT00366 | 1 | |
| Coupling jaw (flange mounting 48)105 od | CMT00367 | 1 | |
| Gearbox front mower 2 speed | CMT00360 | 1 | |
| Mower conditioner seal | CTP00505 | 1 | Replaces ACH02844 |
| 1.5MM l plate mower cover | CZB02596 | 1 | |
| 4MM l link plate mower | CZD02943 | 4 | |
| 6MM l mower conditioner handle | CZF07383 | 1 | |
| 6MM l mower conditioner tine | CZF08035 | 44 | Replace in balanced pairs 180 apart at any position of the drum (replaces CZF07385) |
| 6MM l mower conditioner tine (short) | CZF08722 | 4 | Replace in balanced pairs 180 apart on the drum ends only (replaces CZF07397) |
| Coupling jaw+spider kit mower | KST00103 | 1 | Includes items 10, 13, 27, 30, 37, 44, 45, 46 & gearbox shaft seal CSE00633 |
Cutterbar RH
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Mower disk w/splined hole | ART00376 | 5 | Up to serial no. 1002499 (includes items 18 & 31) |
| Mower disc w/sq stud hole | ART00386 | 5 | From serial no. 1002500 (includes items 18 & 31) |
| Shaft pinion L120 mower hub | CMH01691 | 7 | |
| Cover cap disc mower | CZB00304 | 5 | |
| Disc hub asm upper (r) | AAX00001 | 6 | |
| Disc hub asm upper (o) | AAX00002 | 1 | |
| Idler holder upper mower bed | CMH01696 | 13 | |
| Idler holder lower mower | CMH02764 | 13 | |
| Bar closure 2X CSK holes mower bed | CMH01742 | 1 | |
| Gasket bar rubber mower bed | CBE00335 | 1 | |
| Knife holder mower 5MM | CZE00293 | 7 | Up to serial no. 1002499 |
| Knife holder mower | CZE00318 | 7 | From serial no. 1002500 |
| Cap cover disc outer drum mowr | CZB00305 | 2 | |
| Disc hub asm lower mower bed | CMH01743 | 7 | |
| Mower disc with outer drum | ART00375 | 2 | Up to serial no. 1002499 (includes items 18 & 31) |
| Mower disc with outer drum | ART00385 | 2 | From serial no. 1002500 (includes items 18 & 31) |
| Main slide disc mower | ACH01473 | 6 | Up to serial no. 1002499 |
| Main slide with skid pad slot | ACH01562 | 6 | Up to serial no. 1002499 (80 mm slot) |
| Main slide disc mower w/slot | ACH01619 | 6 | From serial no. 1002500 (96 mm slot) |
| Slide under g-box disc mower | ACH01474 | 1 | Up to serial no. 1002499 |
| Slide g-box with skid pad slot | ACH01563 | 1 | Up to serial no. 1002499 (80 mm slot) also order 2x item 66 |
| Slide under gbox mower w/slot | ACH01620 | 1 | From serial no. 1002500 (96 mm slot) |
| Mower cutterbar weld asm RH | CMT00356 | 1 | |
| Skid under gbox disc mower | CZE00294 | 1 | Wear part |
| Pin knife holder stud splined | CMH01692 | 14 | Up to serial no. 1002499 |
| Kit spline w/hook & spring plates | KST00084 | 1 | Up to serial no. 1002499 (conv kit to splined hook pins) for replacement pins order CMH02881 |
| Pin knife holder hook w/sq | CMH01840 | 14 | From serial no. 1002500 |
| Gear 20T work disc mower bed | CMH01698 | 7 | |
| Gear 38T idler mower bed | CMH01699 | 1 | |
| Gear 38T gbox drive mwr bed | CMH01693 | 1 | |
| Gear 60T idler mwr bed | CMH01697 | 12 | |
| Gearbox front mwr 2 spd condr +input gbox | CMT00360 | 1 | Used on front mower f3100 only & includes input gearbox drive |
| Gearbox rear mwr 2 spd condr | CMT00380 | 1 | Used on rh rear mower r3100 only & excludes input gearbox drive |
| Plug oil inlet hex M22x1.5 mwr bed | CFA01085 | 1 | |
| Retaining ring 6307N bearing | CFA01109 | 13 | |
| Bearing 6307 2RS C3 | CBR00294 | 14 | Service part |
| Bearing 6307 2RS n snap-ring | CBR00335 | 13 | Service part |
| Nut lock-half M30x1.5 mwr 8.8 zinc plated | CFA01116 | 7 | |
| Nut M10 nyloc zinc plated | CFA00123 | 14 | |
| Nut M12 nyloc | CFA00124 | 35 | |
| Nut M12 flanged head 10.9 zinc plated | CFA00439 | 14 | |
| Washer flat 10 mm zinc plated | CFA00201 | 14 | |
| Washer spring 8MM zinc plated | CFA00185 | 8 | |
| Washer spring 12MM light zinc plated | CFA00623 | 28 | |
| Washer SKM16 | CFA00252 | 8 | |
| Circlip 35MM external | CFA00514 | 8 | |
| Screw M8x20 btn head soc hx zinc plated | CFA00429 | 8 | |
| Bolt M16x40 allen HD 10.9 | CFA01110 | 13 | |
| Setscrew M10x25 cup sq zinc plated | CFA00442 | 12 | |
| Setscrew M10x30 cup sq zinc plated | CFA00017 | 2 | |
| Setscrew M12x25 zinc plated | CFA00031 | 28 | |
| Bolt M12x30 knurled 10.9 zinc plated mower | CFA01115 | 35 | |
| Setscrew M16x35 zinc plated | CFA00229 | 8 | |
| Seal o ring os 30x2.5 mower | CSE00645 | 26 | Service part |
| Seal o ring os 30x2.5 mower | CSE00645 | 13 | Service part |
| Seal o ring os 90x4 | CSE00638 | 7 | Service part |
| Loctite si 5926 40ML non setting gasket | CFA02340 | 1 | Apply a continuous bead of sealant to flat machined surface around each bolt hole & centre bore |
| Oil seal ao 40x72x7 mower bed | CSE00637 | 7 | Service part |
| Setscrew M8x30 CSK allen zinc plated | CFA00593 | 2 | |
| Setscrew M10x20 CSK 8.8 zinc plated allen | CFA01114 | 2 | |
| Key b 10x8x22 mower bed | CFA01111 | 7 | |
| Key b 10x8x30 mower bed | CFA01112 | 1 | |
| Key b 10x8x16 mower bed | CFA01082 | 7 | |
| Mower blade 50x110 right hand | CKN00036 | 8 | Wear part |
| Mower blade 50x110 left hand | CKN00037 | 6 | Wear part |
| Insert cutterbar skid forged | CTP00513 | 7 | Replacement weld-in insert |
| Skid pad flat | CTP00562 | 6 | Wear part; From serial no. 1002500 |
| Skid pad flat under g/box | CTP00563 | 1 | Wear part; From serial no. 1002500 |
| High cut skid +25MM | CTP00564 | 6 | From serial no. 1002500 |
| High cut skid +25MM under gbox | CTP00565 | 1 | From serial no. 1002500 |
| Main skid pad formed +50MM | CTP00511 | 6 | Wear part; Up to serial no. 1002499 (79 mm tab) |
| High cut skid +50MM | CTP00566 | 6 | From serial no. 1002500 (95 mm tab) |
| Skid pad formed gearbox +50MM | CTP00512 | 1 | Wear part; Up to serial no. 1002499 (79 mm tab) |
| High cut skid +50MM under gbox | CTP00567 | 1 | From serial no. 1002500 (95 mm tab) |
| Setscrew M10x20 button head zinc plated | CFA00243 | 2 |
Discharge unit
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Mower side board weld lhs | ACH01461 | 1 | |
| Mower side board weld rhs | ACH01462 | 1 | |
| Mower swath board weld lhs F3100 | ACH02955 | 1 | |
| Mower swath board weld rhs F3100 | ACH02956 | 1 | |
| Canvas front mower discharge | CBE00292 | 1 | |
| Canvas front mower discharge | CBE00300 | 1 | |
| Setscrew M10x25 zinc plated | CFA00024 | 14 | |
| Setscrew M10x30 | CFA00025 | 2 | |
| Setscrew M8x20 zinc plated | CFA00052 | 9 | |
| Nut M10 nyloc zinc plated | CFA00123 | 22 | |
| Nut M12 nyloc | CFA00124 | 2 | |
| Nut M8 nyloc zinc plated | CFA00132 | 30 | |
| Washer flat 12MM zinc plated | CFA00138 | 2 | |
| Washer flat 8MM zinc plated | CFA00147 | 39 | |
| Washer flat 10 mm zinc plated | CFA00201 | 38 | |
| Washer SKM10 | CFA00251 | 4 | |
| Setscrew M10x25 cup sq zinc plated | CFA00442 | 10 | |
| Bolt M12x180 zinc plated | CFA00470 | 2 | |
| Setscrew M8x20 cuphead sq zinc plated | CFA00506 | 21 | |
| M10 lifting eye nut DIN 582 | CFA02312 | 4 | |
| Canvas front mower discharge | CGD00388 | 1 | |
| Bush 12x25x13 | CMH01680 | 2 | Service part |
| Tool box plastic (serko) | CPL00222 | 1 | |
| 2MM l crop flow deflection mower | CZB02512 | 2 | |
| 3MM swath board extension F3100 | CZC02661 | 1 | |
| 3MM swath board extension F3100 | CZC02662 | 1 | |
| 3MM l mower conditioner hood | CZC03892 | 1 | |
| 3MM curtain retainer strip | CZC03897 | 2 | |
| 3MM curtain retainer strip | CZC03898 | 3 | |
| 6MM mower hood support plate | CZF07228 | 2 |
Panels
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Guard mount front mower lhs weld | ACH02895 | 1 | |
| Guard mount front mower rhs weld | ACH02907 | 1 | |
| Mower guard gravity latch | AGD00017 | 2 | |
| Mower guard front pipe weld assembly | AGD00027 | 1 | |
| Front mower front curtain assembly | AGD00034 | 1 | |
| Front mower rhs curtain assembly | AGD00035 | 1 | |
| Mower stepped lhs curtain assembly | AGD00036 | 1 | |
| Front mower guard assembly rhs | AGD00054 | 1 | Complete guard rh asm including frame, latch, curtain & buffers (but not hinge bolts) |
| Mower guard steel frame rhs | AGD00055 | 1 | |
| Front mower steel frame guard lhs | AGD00061 | 1 | |
| Front mower guard assembly lhs | AGD00062 | 1 | Complete guard lh asm including frame, latch, curtain & buffers (but not hinge bolts) |
| Buffer rubber 30x36 M8/27 57SH | CBE00028 | 4 | |
| Door holder rubber female M6 hole | CBE00322 | 2 | |
| Setscrew M12x30 zinc plated | CFA00032 | 6 | |
| Setscrew M8x20 zinc plated | CFA00052 | 7 | |
| Setscrew M8x25 zinc plated | CFA00102 | 14 | |
| Setscrew M8x35 zinc plated | CFA00107 | 9 | |
| Nut M10 nyloc zinc plated | CFA00123 | 4 | |
| Nut M6 nyloc | CFA00131 | 4 | |
| Nut M8 nyloc zinc plated | CFA00132 | 51 | |
| Nut M8 zinc plated | CFA00133 | 4 | |
| Washer flat 16MM zinc plated | CFA00140 | 4 | |
| Washer flat 6MM zinc plated | CFA00144 | 4 | |
| Washer mudwing M6 32MM od | CFA00145 | 2 | |
| Washer flat 8MM zinc plated | CFA00147 | 91 | |
| Washer mudwing M8x31.75 od | CFA00149 | 2 | |
| Washer flat 10 mm zinc plated | CFA00201 | 4 | |
| Setscrew M8x50 zinc plated | CFA00210 | 2 | |
| Washer flat 14MM zinc plated | CFA00222 | 4 | |
| Washer SKM12 | CFA00250 | 6 | |
| Setscrew M10x35 zinc plated | CFA00311 | 4 | |
| Setscrew M8x30 zinc plated | CFA00491 | 12 | |
| Setscrew M8x20 cuphead sq zinc plated | CFA00506 | 1 | |
| Setscrew M6x80 zinc plated | CFA00752 | 2 | |
| Setscrew M8x40 button HD zinc plated | CFA00926 | 2 | |
| Setscrew M6x20 button head zinc plated | CFA02335 | 2 | |
| Guard mower front | CGD00366 | 1 | |
| Bush 8x20x7.5 zinc plated | CMH01356 | 4 | Service part |
| Bush 20x15x50 | CMH02691 | 2 | Service part |
| Bush 25x10.5x14 stepped | CMH02724 | 4 | Service part |
| Door holder male M6 hole | CPL00228 | 2 | |
| Plastic mower guard rhs | CPL00231 | 1 | |
| Mower guard plastic lhs | CPL00234 | 1 | |
| 1.5MM l mower guard | CZB02533 | 1 | |
| 2MM l front mower curtain strip | CZB02545 | 1 | |
| 2MM l front mower curtain strip 2 hole | CZB02547 | 2 | |
| 2MM l mower curtain strip stepped | CZB02601 | 1 | |
| 2MM l front mower curtain strip | CZB04591 | 2 | |
| 3MM crop deflector mower rhs | CZC05155 | 1 | |
| 3MM crop deflector mower lhs | CZC05163 | 1 | |
| 4MM l front mower panel stop brkt rhs | CZD04946 | 1 | |
| 4MM l front mower panel stop brkt lhs | CZD04947 | 1 |
Hood & lights
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Hinge bracket mower guard lhs | AGD00070 | 1 | |
| Hinge bracket mower guard rhs | AGD00071 | 1 | |
| Suspension guard frame weld assembly | AGD00072 | 1 | |
| Mower suspension guard complete assembly | AGD00073 | 1 | Includes frame + fasteners |
| Front mower lighting loom, 3.5M | CEL01514 | 1 | |
| LED marker lamp wing lhs | CEL01515 | 1 | |
| LED marker lamp wing rhs | CEL01516 | 1 | |
| Setscrew M10x30 | CFA00025 | 4 | |
| Setscrew M6x30 zinc plated | CFA00047 | 1 | |
| Setscrew M8x25 zinc plated | CFA00102 | 4 | |
| Setscrew M6x20 zinc plated | CFA00115 | 4 | |
| Nut M10 nyloc zinc plated | CFA00123 | 6 | |
| Nut M6 nyloc | CFA00131 | 5 | |
| Nut M8 nyloc zinc plated | CFA00132 | 16 | |
| Washer flat 16MM zinc plated | CFA00140 | 2 | |
| Washer flat 6MM zinc plated | CFA00144 | 9 | |
| Washer flat 8MM zinc plated | CFA00147 | 16 | |
| Washer flat 10 mm zinc plated | CFA00201 | 10 | |
| Washer SKM8 | CFA00249 | 6 | |
| Setscrew M10x35 zinc plated | CFA00311 | 2 | |
| Setscrew M8x20 button head zinc plated | CFA00429 | 14 | |
| Grommet 6.3x9.5 | CFA02232 | 4 | |
| Suspension guard front mower | CGD00413 | 1 | |
| Bush 25x10.5x14 stepped | CMH02724 | 2 | Service part |
| Door holder male M6 hole | CPL00228 | 1 | |
| Gas strut 245-80 500N | CRA00781 | 2 | |
| Marker board set DIN11030 (282x282) | CST00872 | 1 | Both lh & rh available in sets only (complete with backing boards) |
| Marker board set DIN11030 (282x282) | CST00872 | 1 | Both lh & rh available in sets only (complete with backing boards) |
| 4MM l marker board brk front mower rhs | CZD00245 | 1 | |
| 4MM l marker board brk front mower lhs | CZD00246 | 1 |
Camera & monitor kit
| Part | Part number | Qty | Notes |
|---|---|---|---|
| Camera male phono connector | CEL00961 | 1 | |
| Rca phono socket female 2WAY | CEL01371 | 1 | |
| Double phono adaptor | CEL01593 | 1 | |
| Fuse 250MA 5x20MM glass | CEL01630 | 1 | |
| Fuse 500MA 5x20MM glass | CEL01631 | 1 | |
| Isocan - fendt camera adaptor | CEL01609 | 1 | |
| Second camera power adapter | CEL01520 | 1 | |
| Phono to camera connector | CEL01585 | 1 | |
| Twin camera adapter | CEL01532 | 1 | |
| Camera mounting kit | KST00074 | 1 | |
| Camera-isocan signal cable | CEL00903 | 1 | |
| Colour camera MK1 | CEL00900 | 1 | |
| Camera extension 5M high-flex | CEL01541 | 1 | |
| 2ND camera kit isocan | KST00064 | 1 | Includes items 10, 11 & 12 |
| Camera monitor | CEL01506 | 1 | |
| Camera extension cable 10M | CEL01550 | 1 | |
| Camera extension cable 3M | CEL01556 | 1 | |
| Colour camera MK2 | CEL01533 | 1 | |
| Camera & monitor kit | KST00068 | 1 | Includes items 14, 15 & 16 |
| Quad camera monitor | CEL01655 | 1 | |
| Loom cobo white con euro lead | CEL00064 | 1 | |
| Camera extension cable 10M | CEL01550 | 2 | |
| Colour camera MK2 | CEL01533 | 2 | |
| Double camera bracket complete assembly | ATR00047 | 1 | |
| Dual camera complete kit frt mower | KST00100 | 1 | Includes items 18, 19, 20, 21 & 22 |
Sources
- Maintenance intervals, torque values, storage, specifications (McHale Pro Glide F3100 operator instruction manual, viewer pp9, 40-43)
- Whole parts list (every page)
More from McHale.