New Holland B95C, B95CTC, B95CLR, B110C backhoe loader service schedule
New Holland backhoe loaders · Handbook 84484367, March 2013 edition (with DPF); check your serial plate
Every maker's service job for the New Holland B95C, B95CTC, B95CLR, B110C backhoe loader, counted in hours, with the oils, filters and parts each one needs. Add your telehandler to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.
Track your B95C, B95CTC, B95CLR, B110C backhoe loader for freeVersions: Powershuttle transmission; Powershift transmission
Service intervals
| Job | When |
|---|---|
| Loader and backhoe grease points | every 50 hours |
| Cab air filter, radiator and condenser clean, axle levels, battery terminals | every 250 hours |
| Engine oil and filter change | every 500 hours |
| Fuel filter and fuel prefilter | every 500 hours |
| Engine air filter | every 1,000 hours or every year |
| Transmission oil, filter and screen change | every 1,000 hours |
| Front and rear axle oil change | every 1,000 hours |
| Hydraulic oil and filter change | every 1,000 hours |
| Engine coolant change | every 2,000 hours |
| Diesel particulate filter service | every 3,000 hours |
Service jobs and parts
Loader and backhoe grease points
General · every 50 hours
The chart lists working-attachment greasing at 10 hours and again at 50 hours. The grease points are in the handbook at pages 7-23 and 7-31.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Grease | 1 | NLGI 2 multipurpose (Ambra MG2, NH585/G); dipper rails: Ambra Grease GR EXP (NH587/G). Aztec Oils match: VOLCATEC LITHIUM EP 2 | check your handbook |
Step-by-step
- Wipe the nipples and grease until clean grease shows.
Tools: Grease gun
Cab air filter, radiator and condenser clean, axle levels, battery terminals
General · every 250 hours
The 250 hour group in the chart: cab air filter, radiator and condenser cleaning, transmission oil level, front and rear axle level, hydraulic tank breather clean, battery terminals, and the heater and evaporator clean.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Cab air filter | 1 | Genuine New Holland. Number not in the handbook; check your handbook or dealer | check your handbook |
Step-by-step
- Replace or clean the cab filter and clean the radiator and condenser fins.
- Check the oil levels in the transmission and axles and clean the hydraulic tank breather.
- Clean and grease the battery terminals.
Engine oil and filter change
Engine · every 500 hours
The maintenance chart puts the engine oil and filter at 500 hours. The oil filter holds about 0.5 L.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Engine oil | 1 | 10W-40 or 15W-40. API CJ-4, ACEA E9 (Ambra UNITEK 10W-40 MAT3521), 8 L with filter. Aztec Oils match: AGRITEC UTTO SS HD | check your handbook |
| Engine oil filter cartridge | 1 | Genuine New Holland. Number not in the handbook; check your handbook or dealer | check your handbook |
Step-by-step
- Park on firm level ground, lift the loader and fit the safety strut, put the backhoe in road position and stop the engine.
- Drain the oil while hot using the crankcase drain valve, then fill with the grade above.
- Unscrew the cartridge with the wrench, wet the seal with oil, screw it on until the seal touches then 3/4 of a turn. Do not pre-fill the filter.
- Run for a few minutes, wait 15 minutes and check the dipstick.
Tools: Drain tray (15 L), Wrench 380000670
Fuel filter and fuel prefilter
Fuel · every 500 hours
The maintenance chart puts the fuel filter and the fuel prefilter at 500 hours. The handbook says an original cartridge must be used, as a non-approved part could damage the injection pump. Drain condensation from the prefilter every 50 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Fuel filter cartridge | 1 | Genuine New Holland. Number not in the handbook; check your handbook or dealer | check your handbook |
| Fuel prefilter cartridge | 1 | Genuine New Holland, with water sensor. Number not in the handbook; check your handbook or dealer | check your handbook |
Step-by-step
- Place a container under the filter, unscrew the cartridge, wet the new seal and screw on until the seal touches, then 3/4 of a turn.
- On the prefilter, disconnect the water sensor plug first and refit it after.
- Bleed the fuel system.
Tools: Wrench 380000670, Container for fuel
Engine air filter
Engine · every 1,000 hours or every year
The maintenance chart lists the engine air filters at 1000 hours. The handbook says the safety element must never be cleaned and is replaced once a year or whenever the main element is changed. Clean the main element no more than three times or one year.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Main air filter element | 1 | Genuine New Holland. Number not in the handbook; check your handbook or dealer | check your handbook |
| Safety air filter element | 1 | Genuine New Holland. Replace yearly or with the main element. Number: check your handbook or dealer | check your handbook |
Step-by-step
- Unhook the three clips and remove the cover, then the main element and safety element.
- Clean the inside of the housing with a cloth, fit the new safety element then the main element and refit the cover.
- Start the engine and check the air-filter restriction lamp is off.
Transmission oil, filter and screen change
Transmission · every 1,000 hours
The maintenance chart puts the transmission oil filter, the oil change and (powershuttle) the screen filter clean at 1000 hours. A powershift machine uses the powershift lines, also at 1000 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Transmission oil | 1 | Ambra Mastertran (MAT3525 for powershift). Powershuttle 18.5 L (2WD) or 20.8 L (4WD); powershift 20.8 L. Aztec Oils match: AGRITEC UTTO | check your handbook |
| Transmission oil filter cartridge | 1 | Genuine New Holland. Number not in the handbook; check your handbook or dealer | check your handbook |
Step-by-step
- Change the oil while it is warm: drain from the plug, refit it and fill through the dipstick hole.
- Fit the new filter cartridge with the seal wet, tighten 2/3 of a turn after the seal touches.
- Powershuttle: clean the screen filter in detergent, dry with compressed air and refit the cover with a good O-ring (screws 23 Nm).
- Drive for a few minutes in first and second, then recheck the level with the engine running in neutral.
Tools: Drain tray (25 L), Torque wrench (23 Nm for the screen cover screws)
Front and rear axle oil change
Axles · every 1,000 hours
The maintenance chart puts the front and rear axle oil change at 1000 hours; the levels are checked every 250 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Axle oil | 1 | 80W-140. Ambra TRX, NH600/TR, API GL-4. Front differential 6.5 L, rear differential 21.2 L, reduction gears 0.7 L (front) and 0.8 L (rear) each. Aztec Oils match: AGRITEC HP-PRO | check your handbook |
Step-by-step
- Drain each differential and reduction gear by its plug and refill through the level plug up to the hole.
- Do both reduction gears on each axle, turning the wheel so the plug is lowest to drain and horizontal to fill.
Tools: Drain tray (25 L)
Hydraulic oil and filter change
Hydraulics · every 1,000 hours
The maintenance chart puts the hydraulic oil filter and the hydraulic tank oil change at 1000 hours. Clean the tank breather every 250 hours.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Hydraulic oil | 1 | 10W-30. Ambra Multi G Hydrosystem 46 (NH410B), API GL-4, ISO VG 32/46. System 118 L. Aztec Oils match: AGRITEC UTTO | check your handbook |
| Hydraulic oil filter cartridge | 1 | Genuine New Holland. Number not in the handbook; check your handbook or dealer | check your handbook |
Step-by-step
- Drain the tank when the oil is warm, from the drain plug and the breather cap hole.
- Fit the new filter (bottom left of the machine): wet the seal, tighten 3/4 of a turn after the seal touches.
- Refill to the middle of the gauge.
Tools: Drain tray (130 L), Wrench 380000670
Engine coolant change
Cooling · every 2,000 hours
The maintenance chart lists the engine coolant at 2000 hours. Hardness, chloride and sulphate limits are given in the handbook (300, 100 and 100 parts per million).
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Coolant | 1 | Akcela Premium Anti-freeze NH900A, ASTM D6210, 50 per cent mix, 24 L | check your handbook |
Step-by-step
- Drain the radiator through its drain cock with the engine cold.
- Rinse with fresh water, drain again and refill slowly to avoid air.
- Run for a few minutes and top up.
Tools: Drain tray (30 L), Hose pipe about 1 m
Diesel particulate filter service
Engine · every 3,000 hours
The chart has the DPF at 3000 hours. The handbook says a specialist centre with a regeneration station does it; consult your dealer. The engine breather filter is replaced at 4000 hours.
Step-by-step
- Book it with your dealer.
Oils, fluids and capacities
| System | Oil or spec | Capacity |
|---|---|---|
| Engine | Turbo diesel with a diesel particulate filter (DPF); the handbook gives no model | |
| Engine oil | 10W-40 (or 15W-40). Ambra UNITEK 10W-40 MAT3521, API CJ-4, ACEA E9 | 8 L with filter |
| Coolant | 24 L (50 per cent Akcela Premium antifreeze to NH900A, ASTM D6210) | |
| Valve clearances | Check your handbook | |
| Engine oil | 10W-40 or 15W-40. Ambra UNITEK 10W-40 MAT3521, API CJ-4, ACEA E9 | 8 L with filter |
| Cooling system | Akcela Premium Anti-freeze NH900A (ASTM D6210), 50 per cent water | 24 L |
| Hydraulic system | 10W-30. Ambra Multi G Hydrosystem 46 (NH410B), API GL-4, ISO VG 32/46. Biodegradable alternative: Ambra Hydrosystem 46 BIO-S (NH646BS) | 118 L |
| Powershuttle transmission | Ambra Mastertran (tractor transmission oil) | 2WD 18.5 L; 4WD 20.8 L |
| Powershift transmission | Ambra Mastertran MAT3525 | 20.8 L |
| Front axle differential (4WD) | 80W-140. Ambra TRX, NH600/TR, API GL-4 | 6.5 L; wheel reduction gear 0.7 L each. 2WD: 0.2 L |
| Rear axle differential | 80W-140. Ambra TRX, NH600/TR, API GL-4 | 21.2 L; wheel reduction gear 0.8 L each |
| Grease points | NLGI 2 multipurpose grease (Ambra MG2, NH585/G); telescopic dipper: Ambra Grease GR EXP (NH587/G) | As required |
| Fuel tank | Diesel to EN 590, low sulphur | 135 L |
| Air conditioning compressor | PAG SP20 oil | 240 cm3 |
Specifications
| Handbook | New Holland operator's manual 84484367, 374 pages on Scribd (maintenance chart pages 7-12 and 7-13) |
| Intervals | 10, 50, 250, 500, 1000, 2000, 3000 and 4000 hours, plus as required. The handbook says all earlier jobs must also be done at each later service |
| Filter wrench | The handbook's spin-on filters use wrench 380000670 |
Known problems
How the intervals were read
The chart text read from Scribd puts the interval label in the middle of each block, so the groups here were checked against the section headings in the procedure pages (10, 50, 250, 500, 1000, 2000, 3000, 4000 hours).
Sources
More from New Holland.