Stoll CompactLine front loader service schedule
Front loaders · CompactLine FC; operating instructions status 10/2021
Covers the Stoll CompactLine front loader (FC 150, 250, 350, 550: L, H, P).
Every maker's service job for the Stoll CompactLine front loader, counted in hours, with the oils, filters and parts each one needs. Add your implement to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.
Track your CompactLine front loader for freeVersions: FC L (6 grease nipples on each side); FC H (8 grease nipples on each side); FC P (11 grease nipples on each side)
Service intervals
| Job | When |
|---|---|
| Grease the bearing positions | every 20 hours |
| Hydraulic hose lines: inspect and replace on age | every 100 hours or every month |
| Grease the catch hooks and locking mechanism | every 100 hours |
| Check the screw connections at the bearings | every 100 hours |
| Check the change frame and loader for wear and cracks | every 100 hours |
| Comfort Drive: grease and service | every 100 hours |
Service jobs and parts
Grease the bearing positions
Lubrication · every 20 hours
Stoll's lubrication schedule says grease the bearing positions every 20 operating hours, and shorten the interval if there is strong dirt contamination. The FC L has 6 nipples on each side, the H has 8 and the P has 11.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Multipurpose grease | 1 | Multipurpose grease DIN 51502 K2K, ISO 6743 ISO-L-XCCEA2 or comparable | check your handbook |
Step-by-step
- Lower the loader and implement to the ground, stop the tractor and take the key out.
- Wipe each nipple clean and grease all the bearing positions on both sides.
- Wipe off any extra grease.
Tools: Grease gun, Rag
Hydraulic hose lines: inspect and replace on age
Hydraulics · every 100 hours or every month
Stoll says inspect hose lines and open and close the shut-off valve every 100 hours (at least once a month), and have the hoses replaced by a workshop at 4 years. Never use a hose more than 6 years old and replace porous or cracked hoses at once.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Hydraulic hose lines | 1 | Check your handbook or Stoll parts list for your loader | check your handbook |
Step-by-step
- Lower the loader and release the pressure before touching any hydraulic part.
- Look at each hose for porous or cracked areas and leaks.
- Read the date on each hose and fitting and replace any line near or past its age limit.
- Open and close the shut-off valve.
Tools: Gloves and goggles, Spanners
Grease the catch hooks and locking mechanism
Lubrication · every 100 hours
Stoll says grease the front loader mountings (catch hooks) and the locking mechanism every 100 hours. Greasing them each time you mount or dismount the loader saves extra work, and grease again after cleaning.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Multipurpose grease | 1 | Multipurpose grease or lubricating oil for the locking mechanism | check your handbook |
Step-by-step
- Grease the catch hooks on the tractor mounting.
- Lubricate the locking mechanism and work it through its travel.
- Wipe off any extra grease so dirt does not collect.
Tools: Grease gun, Rag
Check the screw connections at the bearings
Structure · every 100 hours
Stoll's service schedule says check the screw connections at the bearing positions every 100 hours and tighten if necessary. After the first 5 hours on a newly fitted loader, have a specialist workshop retighten all the mounting screws.
Step-by-step
- Lower the loader to the ground and stop the tractor.
- Check each bolt at the bearing positions against the torque table. The values are for clean, dry threads.
- Tighten any that are loose.
Tools: Torque wrench, Sockets
Check the change frame and loader for wear and cracks
Structure · every 100 hours
Stoll's schedule says do a visual inspection of the loader and mounting kit for damage, especially cracks, every 100 hours, and check the change frame for wear on its lower edge. The wear limit is 8 mm. A worn change frame can break off.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Change frame | 1 | Check your handbook or Stoll parts list for your loader | check your handbook |
Step-by-step
- Park the loader on the ground and clean the change frame.
- Measure the wear on the lower edge. Replace the frame if it is worn to the 8 mm limit.
- Look closely for cracks in the loader and mounting kit. Stop work and see a workshop if you find one.
Tools: Vernier calliper
Comfort Drive: grease and service
Hydraulics · every 100 hours
On loaders with Comfort Drive, Stoll's schedule lists lubrication every 100 hours. The accumulator is under gas and oil pressure and must only be serviced by an authorised workshop.
| Part | Qty | Notes | Part number |
|---|---|---|---|
| Multipurpose grease | 1 | Multipurpose grease DIN 51502 K2K | check your handbook |
Step-by-step
- Lower the loader to the ground with the engine off and turn the Comfort Drive on to relieve the pressure.
- Grease the Comfort Drive points as the lubrication schedule says.
- Take any accumulator fault to an authorised workshop. Do not open the accumulator.
Tools: Grease gun
Oils, fluids and capacities
| System | Oil or spec | Capacity |
|---|---|---|
| Hydraulic oil | Supplied by the tractor. Follow the tractor's own oil change interval | |
| Bearing positions and mountings | Multipurpose grease DIN 51502 K2K, ISO 6743 ISO-L-XCCEA2 or comparable | |
| Locking mechanism | Multipurpose grease or lubricating oil |
Specifications
| Change frame wear limit | 8 mm |
| Hydraulic hose life | Not more than 6 years from the date marked on the hose, with at least 4 years in use (DIN 20066) |
| Screw torques (8.8 / 10.9 / 12.9) | M8 27 / 36 / 42 Nm, M10 54 / 71 / 83 Nm, M12 93 / 123 / 144 Nm, M16 230 / 302 / 354 Nm (the manual has the full table for clean, dry threads) |
Known problems
Change frame wear
A badly worn change frame (over 8 mm) can break off the loader. Check it at the service intervals.
Tractor oil
The loader runs on the tractor's hydraulic oil. Follow the tractor's oil change schedule, then move the loader slowly to all end positions to clear air.
Repair guides
- Hydraulic hose age limits, Comfort Drive accumulator and greasing (Stoll ClassicLine and CompactLine) (Moderate, 1 hour): Cracked, porous or weeping loader hoses, hoses of unknown age, or the 100 hour service on the loader. The Comfort Drive accumulator holds gas and oil pressure.
- Change frame wear and crack check (Stoll CompactLine FC) (Moderate, 30 minutes): Attachments loose on the change frame, visible wear on its lower edge, or cracks in the loader frame or mounting kit. A worn change frame can break away and injure the driver.
The full step-by-step guides are in Farmyard Workshop once you add your implement.
Sources
More from Stoll.