Valtra T191 service schedule

Valtra T series · 2000s (T1 series; the service manual's maintenance group is dated April 2007)

Covers the Valtra T191 (T1 series: T121, T131, T151e, T161, T171, T191).

Every maker's service job for the Valtra T191, counted in hours, with the oils, filters and parts each one needs. Add your tractor to Farmyard Workshop and it works out what's due from your hours and dates, and keeps the service history.

Track your T191 for free

Versions: C models (Classic gearbox, T121c–T171c): hydraulic clutch reservoir; H models (HiTech, T121h–T191h); LS models (Advance, T151eLS–T191LS)

Service intervals

Job	When
Fuel prefilter and sediment bowl check	every 50 hours
Weekly greasing (named points)	every 50 hours
Engine oil and filter change	every 500 hours or every year
Transmission/hydraulic pressure filters and return filter change	every 500 hours
Cab ventilation filter clean	every 500 hours
500-hour checks: brakes, wheel nuts and front axle levels	every 500 hours
Transmission/hydraulic oil change, suction strainer and filters	every 1,000 hours or every year
Front axle differential and hub oil change	every 1,000 hours or every year
Fuel filter and prefilter change	every 1,000 hours or every year
Engine air filter and safety filter change	every 1,000 hours or every year
Cab ventilation and recirculation filter change	every 1,000 hours or every year
Valve clearance adjustment	every 1,000 hours or every year
1,000-hour jobs: ring gear, toe-in, fuel tank, breather, bolts	every 1,000 hours or every year
Coolant change	every 2,000 hours or every 2 years
Brake fluid change	every 2,000 hours or every 2 years
Injector check and clean	every 2,000 hours or every 2 years

Service jobs and parts

Fuel prefilter and sediment bowl check

Fuel · every 50 hours

The weekly (50-hour) list says check the fuel system prefilter and sediment bowl. Water in the fuel can wreck the high-pressure pump and injectors.

Step-by-step

Stop the engine and keep naked flames away.
Look at the sediment bowl and prefilter for water or dirt.
Drain off any water into a container and dispose of it properly.
If the engine then won't start or runs badly, bleed the fuel system.

Tools: Container, Rags

Weekly greasing (named points)

Chassis · every 50 hours

The weekly (50-hour) list names three grease jobs: the three-point linkage, the brake mechanism (high-pressure grease) and the front axle mounting bearings.

Part	Qty	Notes	Part number
Grease	1	Valtra Grease NLGI 2; Valtra Calcium LF for wet points; high-pressure grease for the brake mechanism. Aztec Oils match: VOLCATEC LITHIUM EP 2	check your handbook

Step-by-step

Clean each nipple before you fit the gun.
Grease the three-point linkage until clean grease comes out.
Grease the brake mechanism with high-pressure grease.
Grease the front axle mounting bearings, ideally with the axle unloaded.
Wipe off the surplus grease.

Tools: Grease gun, Rags

Engine oil and filter change

Engine · every 500 hours or every year

The service manual says change the engine oil and filter every 500 hours or yearly, and every 250 hours in extremely dusty work or when running on more than 5% biodiesel. The first change is at the 100-hour service inspection.

Part	Qty	Notes	Part number
Engine oil	1	Valtra Engine CR 10W-40, API CI-4 / ACEA E7, ≈19 L with filter. Aztec Oils match: EMPROTEC SHPD 10W-40 SS	check your handbook
Engine oil filter	1	OEM number per Sparex S.76402 (Fleetguard LF3783), listed for T120 to T191 and T191 HiTech. Often written V836662111. Sparex also quotes 836647133, 836662580.	836662111

Step-by-step

Run the engine to working temperature, park on level ground, lower implements, apply the parking brake and stop the engine.
Remove the sump plug and drain the oil. It will be hot, so wear gloves and keep clear of the exhaust and turbo.
Clean round the filter, unscrew it and look at the old oil and filter: a lot of dirt or metal points to a fault.
Oil the new filter's seal and screw it on by hand.
Refit the sump plug and fill with about 19 L of 10W-40 CI-4 oil.
Start the engine, check for leaks, stop it, wait a few minutes and check the dipstick.

Tools: Drain tray (25 L), Spanner for the sump plug, Filter wrench, Funnel, Rags, Gloves

Transmission/hydraulic pressure filters and return filter change

Hydraulics · every 500 hours

The manual says change the transmission and hydraulic pressure filters and the auxiliary hydraulic return oil filter every 500 hours, or sooner if the filter warning lamp lights. The first change is at 100 hours. The return filter is standard on H and LS models and extra on C models. This filter-only task covers the 500-hour changes between oil changes.

Part	Qty	Notes	Part number
Transmission/hydraulic pressure filter	1	Genuine Valtra number per Sparex S.109253 (also 31539610); Sparex lists T191 under hydraulic filter elements. Position not confirmed: check with your dealer	V20639610
Auxiliary hydraulic return oil filter	1	H and LS models (option on C); check your handbook	check your handbook

Step-by-step

Lower implements, stop the engine and apply the parking brake.
Clean round the filters so no dirt can get into the system.
Unscrew the filters and catch the oil.
Oil the new filter seals and fit them by hand.
Start the engine, check for leaks, then check the transmission oil level and top up.

Tools: Filter wrench, Drain tray, Rags

Cab ventilation filter clean

Cab · every 500 hours

The manual says clean the cab ventilation air filter every 500 hours, more often if needed.

Step-by-step

Remove the cab air filter cover and take out the filter.
Blow it out gently against the normal air flow without damaging the paper.
Refit it. If it is torn or clogged, fit a new one.

Tools: Compressed air with a low-pressure nozzle, Screwdriver

500-hour checks: brakes, wheel nuts and front axle levels

Chassis · every 500 hours

The 500-hour list includes checking the brake and clutch fluid levels, brake pedal free travel, wheel nut tightness and the front axle differential and hub oil levels, and greasing the door hinges.

Step-by-step

Check the brake fluid reservoir (and the clutch reservoir on C models) and top up with SAE J1703 fluid.
Check the brake pedal free travel and adjust as your handbook says.
Check the wheel nuts are tight.
Check the front axle differential and hub oil levels and top up.
Grease the door hinges.

Tools: Torque wrench, Rule, Grease gun, Spanners

Transmission/hydraulic oil change, suction strainer and filters

Transmission · every 1,000 hours or every year

The manual says change the transmission and hydraulic oil and clean the suction strainer every 1,000 hours or yearly. The pressure and return filters fall due at the same time, so they are included here.

Part	Qty	Notes	Part number
Transmission/hydraulic oil	1	Valtra HT 60 or HT 100, API GL-4, 55–65 L. Aztec Oils match: AGRITEC UTTO	check your handbook
Transmission/hydraulic pressure filter	1	Check your handbook	check your handbook
Auxiliary hydraulic return oil filter	1	H and LS models; check your handbook	check your handbook
Suction strainer seal	1	Check your handbook	check your handbook

Step-by-step

Work the tractor so the oil is warm, then park level, lower the linkage and stop the engine.
Drain the transmission and hydraulic oil from the drain plugs.
Take out the suction strainer, wash it in clean solvent, dry it and refit it with a good seal.
Change the pressure filters and the return filter.
Refit the plugs and fill to between the dipstick marks (min 55 L, max 65 L). Do not mix bio oil with mineral oil.
Run the engine, work the linkage and spool valves, then recheck the level with the arms lowered.

Tools: Large drain tray (70 L or more), Spanners, Filter wrench, Parts cleaner, Oil pump

Front axle differential and hub oil change

Front axle · every 1,000 hours or every year

The manual says check the front axle differential and hub oil every 500 hours and change it every 1,000 hours or yearly. The first change is at 100 hours.

Part	Qty	Notes	Part number
Front axle differential oil	1	Valtra Axle LS 80W-90 GL-5, ≈8 L. Aztec Oils match: TRANSMATEC EP-5 80W-90	check your handbook
Hub reduction gear oil	1	Valtra Axle 80W-90 GL-5, ≈1 L each side (1.5 L on industrial axles). Aztec Oils match: TRANSMATEC EP-5 80W-90	check your handbook

Step-by-step

Park level and stop the engine.
Drain the differential housing and refit the plug.
Turn each front wheel so the hub plug is at the bottom and drain the hub.
Fill the differential with limited-slip oil to its level plug.
Turn each hub so the plug is at the level position and fill to the hole. Refit all plugs and check for leaks after a short drive.

Tools: Drain tray, Spanners, Oil pump or squeeze bottle

Fuel filter and prefilter change

Fuel · every 1,000 hours or every year

The manual says change the fuel filter and prefilter every 1,000 hours or yearly, and every 500 hours on more than 5% biodiesel. Both are also changed at the 100-hour inspection. Common-rail injection is very sensitive to dirt and water.

Part	Qty	Notes	Part number
Fuel filter	1	Genuine Valtra/AGCO main fuel element (V836867595); Sparex S.109180 / S.12020730 list T191. Main role per Partao and Lindstrom listings	836867595
Fuel prefilter	1	Genuine Valtra/AGCO fuel prefilter (V836867591); Sparex S.109179 / S.12020540 list T191. Prefilter role per Partao and Lindstrom listings	836867591

Step-by-step

Stop the engine and keep naked flames away.
Clean round the filters, remove them and catch the fuel.
Fit new filters with new seals. Do not prefill the main filter with unfiltered fuel.
Bleed the system as your handbook describes, start the engine and check for leaks.

Tools: Filter wrench, Container, Rags

Engine air filter and safety filter change

Engine · every 1,000 hours or every year

The manual says change the air filter and safety filter every 1,000 hours or yearly. Change them sooner if the restriction warning comes on in dusty work.

Part	Qty	Notes	Part number
Air filter main element	1	Genuine number per Sparex S.174432 (outer), listed for T191 HiTech. Also written 836862573.	V836862573
Air filter safety element	1	Genuine number per Sparex S.174431 (inner), listed for T191 HiTech. Also written 836862574.	V836862574

Step-by-step

Stop the engine and open the air filter housing.
Take out the main element, then the safety element. Take care no dirt falls into the intake.
Wipe the housing clean.
Fit the new safety element and main element and close the housing securely.

Tools: Clean rags, Torch

Cab ventilation and recirculation filter change

Cab · every 1,000 hours or every year

The manual says change the cab ventilation air filter and the recirculation filter every 1,000 hours or yearly.

Part	Qty	Notes	Part number
Cab ventilation air filter	1	Check your handbook	check your handbook
Cab recirculation filter	1	Check your handbook	check your handbook

Step-by-step

Remove the cab air filter cover and the old filter.
Change the recirculation filter inside the cab.
Fit the new filters the right way round and refit the covers.

Tools: Screwdriver

Valve clearance adjustment

Engine · every 1,000 hours or every year

The manual lists valve adjustment in the 1,000-hour or yearly service. The clearance is 0.35 mm for inlet and exhaust, hot or cold.

Part	Qty	Notes	Part number
Rocker cover gasket	1	Check your handbook	check your handbook

Step-by-step

Remove the rocker cover.
Turn the engine until each cylinder in turn is at top dead centre on its compression stroke, following the service manual's sequence.
Check the clearance between rocker and valve: 0.35 mm inlet and exhaust.
Adjust if needed and tighten the lock nuts, then recheck.
Refit the rocker cover with a sound gasket and check for leaks.

Tools: Feeler gauges, Spanners and screwdriver, Engine turning tool, Service manual

1,000-hour jobs: ring gear, toe-in, fuel tank, breather, bolts

Chassis · every 1,000 hours or every year

The 1,000-hour or yearly list also includes greasing the flywheel ring gear, checking the front wheel toe-in, cleaning the fuel tank, changing the transmission housing breather, calibrating the accelerator pedal and checking the power shuttle, and tightening the frame nuts and bolts.

Part	Qty	Notes	Part number
Transmission housing breather	1	Check your handbook	check your handbook

Step-by-step

Grease the flywheel ring gear as your handbook shows.
Check and adjust the front wheel toe-in.
Drain the sediment from the fuel tank and clean it.
Change the transmission housing breather.
Have the accelerator pedal calibrated and the power shuttle checked (dealer job).
Check the frame nuts and bolts for tightness.

Tools: Grease gun, Tape measure, Spanners, Torque wrench, Drain tray

Coolant change

Cooling · every 2,000 hours or every 2 years

The manual says change the radiator coolant every 2,000 hours or every other year.

Part	Qty	Notes	Part number
Coolant	1	Water and antifreeze to ASTM D3306-86a or BS 6580:1985, ≈31 L on the T191	check your handbook

Step-by-step

Let the engine cool before you open the cap.
Drain the radiator and block.
Close the drains and refill with the right mixture.
Run the engine with the heater on to purge air, let it cool and top up.

Tools: Large drain tray, Funnel, Antifreeze tester

Brake fluid change

Brakes · every 2,000 hours or every 2 years

The manual says change the brake fluid every 2,000 hours or every other year. Brake fluid takes up water over time.

Part	Qty	Notes	Part number
Brake fluid	1	DOT 3. SAE J1703, ≈0.5 L reservoir (plus ≈0.2 L clutch reservoir on C models). Aztec Oils match: HYDRATEC DOT 4 BF	check your handbook

Step-by-step

Clean round the reservoir cap before opening it.
Bleed each brake until clean fluid comes through, keeping the reservoir topped up.
On C models, bleed the clutch circuit too.
Test the brakes before driving off.

Tools: Bleed tube and jar, Spanner for the bleed screws, Helper

Injector check and clean

Fuel · every 2,000 hours or every 2 years

The manual says check and clean the injectors every 2,000 hours or every other year. These are common-rail injectors, so it is a dealer job.

Step-by-step

Book the tractor in with a Valtra dealer.
Ask them to check and clean the injectors and report any faults.

Tools: Dealer service

Oils, fluids and capacities

System	Oil or spec	Capacity
Engine	Valtra (Sisu) 74 CTA-4V 7.4 L 6-cylinder common-rail turbo diesel with intercooler, 4 valves per cylinder (108 × 134 mm). T121–T161 use the 6.6 L 66 CTA-4V.
Engine oil	Valtra Engine CR SAE 10W-40 (−25 to +40 °C), API CI-4 (ACEA E7)	≈19 L with filter
Coolant	≈31 L on the T191h/T191LS (≈29 L T121–T131, ≈30 L T151e–T171). Water and antifreeze to ASTM D3306-86a or BS 6580:1985.
Valve clearances	0.35 mm inlet and exhaust, engine hot or cold
Transmission and hydraulics (shared)	Valtra Transmission HT 60 (−30 to +30 °C) or HT 100 (−10 to +40 °C), API GL-4. ISO 15380 HEES synthetic-ester bio oil is allowed if it meets tractor transmission oil requirements; never mix it with mineral oil.	Min 55 L, max 65 L
Powered front axle differential	Valtra Axle LS (limited slip), SAE 80W-90, API GL-5	≈8 L
Powered front axle hub reduction gears	Valtra Axle SAE 80W-90, API GL-5	≈1 L each side (agricultural axle); ≈1.5 L each side (industrial axle)
Front PTO (extra equipment)	Shell Donax TX	≈2.2 L
Brake fluid reservoir	Brake fluid SAE J1703	≈0.5 L
Clutch fluid reservoir (C models)	Brake fluid SAE J1703	≈0.2 L (≈0.25 L with HiShift)
Fuel tank	Diesel to EN 590	≈165 L (the table also lists 170 L for the extra tank; check your handbook)
Windscreen washer	Washer fluid	≈11 L (≈17.5 L with forestry equipment)
Grease	Valtra Grease NLGI 2 (lithium), Valtra Calcium LF NLGI 2 for points that get wet, Valtra Grease Moly NLGI 2 for shock-loaded points	—

Specifications


Engine output, T191h/T191LS (ISO 14396)	Max 139 kW (189 hp) at 2,000 rpm; transport/PS boost 155 kW (211 hp); Sigma Power 155 kW (211 hp) at 2,000 rpm
Rated output, T191h/T191LS (ISO 14396)	136 kW (185 hp) at 2,200 rpm; boost 151 kW (205 hp); Sigma Power 153 kW (208 hp)
Max torque, T191h/T191LS	680 Nm at 1,400 rpm; 750 Nm with boost; 830 Nm at 1,500 rpm with Sigma Power
Idle speed / max no-load speed	850 rpm (650 rpm with the parking brake on) / 2,400 rpm
Other T1 engines	T121–T161: 66 CTA-4V 6.6 L; T171: 74 CTA-4V 7.4 L
Bolt torques (8.8, lubricated)	M10 50 Nm, M12 90 Nm, M14 140 Nm, M16 220 Nm, M20 430 Nm (from the general metric table)

Known problems

Biodiesel shortens intervals

On more than 5% biodiesel, the engine oil goes to 250 hours and the fuel filters to 500 hours.

Filter warning lamp

Change the transmission pressure filters at once if the filter indicator lamp lights, whatever the hours.

Vibration damper on smaller engines

The 2,000-hour list includes checking the engine vibration damper on the T121–T161 (6.6 L engines), but not on the T171 or T191.

Later T series

The later T4 series (T144–T234) has a different engine and schedule; this entry is for the T1 series only.

Repair guides

Foot brake adjustment, master cylinder pushrod and bleeding (Moderate, 1–2 hours): Long brake pedal travel, tractor pulls to one side with pedals latched, spongy pedal, brakes dragging or getting hot.
Common-rail fuel system: filters, air in fuel and safe checks (Specialist, 30 minutes for owner checks; injector or pump faults need a dealer): Engine will not start after running out of fuel or a filter change, low power, engine warning on the display, water in the sediment bowl.
Clutch drag or slip on C models: bleeding, pushrod and disc checks (Hard, 1 hour to bleed and set; 1–2 days to split for a disc): Clutch will not free (gears crash, tractor creeps), pedal soft, clutch slips or judders, reservoir low.
Overheating: thermostat test and cooling checks (Moderate, 1–2 hours): Temperature gauge high under load, engine slow to warm up, heater cold, coolant boiling over.
Valve clearance check and adjustment (T120 to T190 and T191) (Moderate, 2–4 hours): Ticking from the top of the engine, loss of power, or at the valve adjustment interval.

The full step-by-step guides are in Farmyard Workshop once you add your tractor.

Parts list with genuine part numbers

Dealer listings naming this model plus the maker numbers in the site service schedule; check serial range; plus Valtra T191H tractor (T1 series) AGCO parts book (T191H/T191LS; no serial range in book title; serial splits noted per row)

Engine service

Part	Part number	Qty	Notes
Engine oil filter	836662111	1	OEM number per Sparex S.76402 (Fleetguard LF3783), listed for T120 to T191 and T191 HiTech. Often written V836662111. Sparex also quotes 836647133, 836662580.
Air filter main element	V836862573	1	Genuine number per Sparex S.174432 (outer), listed for T191 HiTech. Also written 836862573.
Air filter safety element	V836862574	1	Genuine number per Sparex S.174431 (inner), listed for T191 HiTech. Also written 836862574.

Fuel

Part	Part number	Qty	Notes
Fuel filter	836867595	1	Genuine Valtra/AGCO main fuel element (V836867595); Sparex S.109180 / S.12020730 list T191. Main role per Partao and Lindstrom listings
Fuel prefilter	836867591	1	Genuine Valtra/AGCO fuel prefilter (V836867591); Sparex S.109179 / S.12020540 list T191. Prefilter role per Partao and Lindstrom listings

Transmission and hydraulics

Part	Part number	Qty	Notes
Transmission/hydraulic pressure filter	V20639610	1	Genuine Valtra number per Sparex S.109253 (also 31539610); Sparex lists T191 under hydraulic filter elements. Position not confirmed: check with your dealer
Gearbox filter	20650100	1	Fitment includes T171, T191: genuine number per Partao listing

Brakes

Part	Part number	Qty	Notes
Brake slave cylinder (parking brake)	V36798910	1
Actuating disc kit (parking brake)	V34127300	1
Repair kit, friction/intermediate plate	V34665000	1
Brake disc 9.5 inch	V34127100		Wear part
Brake disc, intermediate 9.5 inch	V34127200		Wear part
Counter plate	V33709100
Spring (actuating disc)	V34665100
Fork (actuating disc)	V34665400
Pin (actuating disc)	V34665500
Ball 7/8 inch (actuating disc)	V412960
Parking brake wire L=1005	V32841820
Spring (parking brake)	V31841400
Rubber membrane	V36753300
Lever	ACV0301750

Brake pedals

Part	Part number	Qty
Brake master cylinder - booster	V36790610	1
Brake pedal, right	V36618600
Brake pedal, left	V36616100
Axle shaft (pedal)	V36628310
Safety switch 12V	V33558700
Spring	V37210400
Needle roller bearing	V70038200
Fork	V36795800
Rubber seal	V36847600
Rod clamp	V36621900
Rubber	V594540

Engine oil system

Part	Part number	Notes
Engine oil filter	V836662580	Wear part
Oil cooler, oil to water type	V836859699
Seal (oil cooler)	V836862235
Oil pressure control valve spring assembly	V836667650
Oil pressure control valve seat	V836659521
Oil pressure control valve gasket	V836322190
Oil pressure control valve cover	V836659524

Air filter

Part	Part number	Qty	Notes
Air filter assembly	V34657200
Air filter gasket L=960	V33572300
Air filter sensor 65 bar	V34654000
Suction pipe	V34517400
Suction pipe	V36436600

Fuel system

Part	Part number	Notes
Fuel filter, spin-on (pre-filter)	V836867591	Wear part
Fuel filter, spin-on (main)	V836867595	Wear part
Fuel filter, water separator	V836862051	Wear part
O-ring (fuel filter)	V836862496
O-ring, fuel filter	V614601125
Fuel filter water alarm sensor	V836866576
Fuel lift pump assembly	V836867599
Fuel filter assembly	V836867593

Cooling system

Part	Part number	Qty
Water pump, with pulley	V836867092	1
Water pump repair kit	V836840627
Water pump multi-ribbed pulley	V836867093
Water pump shaft	V836866628
Water pump impeller	V836846303
Water pump backplate	V836864472
Water pump ball bearing	V610060124
Water pump bearing	V610063044
Water pump shaft seal	V614102636
Water pump gasket	V837073981
Water pump gasket	V836864471
Thermostat 79C without housing	V836015156	1
Thermostat 83C	V836331590	1
Thermostat gasket	ACX3407620
Thermostat housing	V836847888
Thermostat housing seal ring	VKH3618
Coolant temperature sensor 106C	V836640772
Fan blade, 8 blades (to DS128012)	V836840906
Fan hub (to DS128012)	V836864264
Fan blade, 9 blades (from DS128013)	4281537M1
Fan drive, viscous coupling (from DS128013)	V39255100
Radiator (to V38214)	V34391110
Radiator (V38215 to DS128012)	V34391120
Radiator, no cap (Denso, from DS128013)	ACV0006380
Radiator conversion kit	ACV0090100
Upper radiator hose (to DS128012)	V34595500
Upper radiator hose (from DS128013)	ACV0161960
Lower radiator hose (to DS128012)	V34541800
Lower radiator hose (from DS128013)	V63580600
Expansion tank with cap 5L	V35707010

Starter motor

Part	Part number	Qty
Starter motor 12V 4.2 kW	V836873290	1
Starter bushing	V836862454
Starter carbon brush	V836862462
Starter gear	V836862458
Starter lever	V836862457
Starter bendix drive	V836862456
Starter parts kit	V836862460
Starter solenoid	V836662709
Starter bearing bush	V836862459

Alternator and belts

Part	Part number	Qty	Notes
Alternator 120 amp	V836666721	1
Alternator bearing	V836662426
Alternator bearing	V836640961
Alternator rectifier	V836662449
Alternator regulator	V836662450
Alternator cover	V836662343
Alternator pulley	V836866731
Belt tensioner for serpentine belt (to T10019)	V836667411
Belt tensioner (from T10020)	V836667827
Serpentine drive belt PK8	V685081710		Wear part

Front axle and steering

Part	Part number	Qty
Steering cylinder (Dana 740/532 and 533)	V36248900	1
Tie rod and ball joint assembly	V36249000	2
Tie rod	V37017400
Axial joint	V37017500
Tie rod end rubber bellows	V36249100
Axial joint rubber bellows	V36249200
Steering cylinder seal set	V36335200
Kingpin kit (includes items 9-13)	ACP0316430
Jointed (kingpin) housing, right (to S-ITA-514923)	V36249700
Jointed (kingpin) housing, right (from S-ITA-514924)	V37952100
Jointed (kingpin) housing, left (to S-ITA-514923)	V36249600
Jointed (kingpin) housing, left (from S-ITA-514924)	V37952000
Set screw (kingpin) assembly	V36249500
Kingpin bearing	VLA9272
Kingpin gasket	V36249400
Front axle 740/532	V36000500
Axle housing, left 740/532	V36245600
Axle housing, right 740/532 (early)	V36245800
Axle housing, right 740/532 (later)	V37955910
Axle bearing bush	V31790300
Axle bearing bush	V31791700
Front axle shaft seal	VKH3780
Front axle housing O-ring	VKH3784
V-ring	V35729400
Bearing housing	V35730300
Axle bracket kit	ACP0316460
Front drive shaft, left assembly 740/532 and 533	V36246600
Front drive shaft, right assembly 740/532 and 533	V36246700
Drive shaft ball bearing 60x85x13	VLA9267
Drive shaft seal	VKH3781
Cross joint (universal joint) kit	ACP0316550
Hub centre part	V36247200
Axle shaft, wheel side	V36247300
Front suspension shock absorber	V33139100
Front suspension bumper	V34664300
Front suspension solenoid valve (Autocomfort)	V37246500

Clutch and drivetrain

Part	Part number	Qty	Notes
Drive plate	V35652400
Clutch shaft	V34136400
Clutch shaft ball bearing 25x62x17	VLA1805
Clutch sleeve	V33375900
Clutch sleeve	V33516400
Clutch pedal	V36661900
Clutch pedal safety switch 12V	V33558700
Clutch pedal angle sensor	V34253500
Clutch pedal spring	V33540700
Transmission oil cooler, oil to air	V34669310
Final drive shaft	V33629100
Final drive seal	VKH4967
Final drive taper roller bearing	VLA5324
Final drive taper roller bearing	VLA5938
Final drive cylindrical roller bearing	VLA9195
Speed sensor, rear housing	V37580800

Hydraulics

Part	Part number	Qty
Tandem hydraulic pump Bosch 25+11	V33561800	1
Hydraulic pump Haldex 32+11 (optional)	ACV029172A
Hydraulic pump seal set (Bosch S1)	V34354700
Pump pinion gear (Bosch)	V33592800
Pump pinion gear (Haldex)	ACV0769400
Hydraulic pump O-ring	VKH4191
Hydraulic suction strainer	V32556300
Hydraulic suction pipe	V34168400
Safety valve 23 MPa	V33442800
Safety valve spring 19/23 MPa	V32670410
Hydraulic oil filter	V31539610	1
Hydraulic filter housing	V31539420
Hydraulic filter seal	VKH4914
Hydraulic filter O-ring	VKH4150
Hydraulic filter sensor	V33093900
Non-return valve	V34375600
Spool valve seal set (block)	V32449600
Spool valve seal kit (block)	V32449500
Spool valve block 2-acting (out-hold-in)	V32536400
Spool valve block 2/1-acting (float)	V32536500
Pressure control valve 194 bar	V30259330
Control lever handle grip	V34266300
Spool control lever	V32529720
Spool valve O-ring 14x2	VKH4321
Spool valve O-ring 22x2	VKH4322
Spool valve O-ring 16x2	VKH4323

Rear linkage

Part	Part number	Qty
Lower link, right, Cat 3 L=940	V35471420	1
Lower link, left, Cat 3 L=940	V35471520	1
Lower link repair kit (to V22119)	V35474210
Lower link repair kit (from V22120)	V39047400
Lower link joint 37mm	V33223900
Lower link ball joint Cat 3 (64/37.4)	V32773300
Lower link ball joint Cat 3/2 (64/28.4)	V30683300
Lower link spring Cat 3 (to V22119)	V32099500
Top link L=635-880 M33x3 (to T23317)	V33392100
Top link, ball end (from T23318)	V33392120
Top link turnbuckle (from T23318)	V33392210
Top link retainer assembly (to X23100)	V32894510
Top link rod clamp (to T23317)	V33392500
Top link rod clamp (from T23318)	V37214200
Adjustable levelling arm M33x3	ACV0200660
Levelling arm handle	V32975100
Levelling arm turnbuckle M33x3	V33415800
Stabiliser external tube	V33290810
Stabiliser inner link	V33290920
Stabiliser sleeve bushing	V33291100
Stabiliser sleeve bushing	V33417000
Stabiliser sleeve bushing (650/60R38 tyres)	V32861900
Stabiliser sleeve bushing (710/70R38, 710/60R42 tyres)	V39849500
Lift cylinder ball bearing	VLA9153
Lift cylinder guide bush	V31982400

Cab, glass, wipers, seat

Part	Part number	Qty
Wiper blade, windscreen and rear window L=475mm	V37748900	1
Wiper arm, windscreen	V30302000
Wiper motor, windscreen (Doga)	V32911610	1
Windscreen washer pump	V30240700
Washer check valve (to W06100)	V34894700
Side mirror glass, right 5mm	V36483810
Side mirror glass, left 5mm	V36482610
Mirror head 145x195 (to W06100)	V32738800
Mirror glass (to W06100)	V32711900
Cab rear view mirror head (from W06101)	V39272000
Rear window, toughened (to U02335)	V36661500
Rear window, toughened (U02336 to W06100)	V36661510
Rear window, toughened (from W06101)	V37272300
Rear glass, lower	V36707100
Side window glass, right 5mm	V36424700
Side window glass, left 5mm	V36423900
Side window glass, left, openable (from W06101)	V37253000
Rear window gasket L=3940 (from T34346)	V37316600
Window gas strut L=585 (to W06100)	V31631300
Window gas strut L=525 (from W06101)	V37466100
Window handle kit	V36660100
Window handle (from CS118011)	V63383400
Door glass, right 5mm	V36297810
Door glass, left 5mm	V36268510
Door gas strut	V31517920
Door lower hinge	V36588700
Driver's seat assembly MSG85A/731	V36393900	1
Seat upper part	V34149800
Armrest, left	V34161000
Armrest, right	V63454200

Lights

Part	Part number	Qty	Notes
Headlight, right driving (to W06100)	V36612100
Headlight, left driving (to W06100)	V36612200
Headlight, right driving (from W06101)	V37939300
Headlight, left driving (from W06101)	V37939200
Headlight bulb H4 12V 60/55W	VSH2663
Work light, bulb H3 12V 55W (to V17122)	V34203300
Work light, bulb H9 12V 55W (from V17123)	V39047000
Work light bulb 12V 55W H3	VSH2652
Bulb 12V 5W	VSH2640
Roof number plate light 5W	V34151100
Step light	V36561400
Xenon work light, converter included	V37213400
Cabin light delay relay 12V 10A	V34468100

Sources

Open Farmyard Workshop